Have a new FCP Studio 2...having problems with serial number

I just got FCP Studio 2 and it came with a serial number upgrade. When I put it in it tells me to put my original serial number in, so I put my serial number from my FCP 3 and it tells me it is invalid....
What do I do? How can it be invalid when I use my FCP 3 nearly everyday?!
Anyone have any suggestions?

Refer to Apples upgrade page on the website to see what upgrade goes with what. You need to see what you need to upgrade to run FCS 2.
FCP --> FCS 1
FCS --> FCS 2
(everything has its own price, depending what you are upgrading from)
Hope that helps
Hisham

Similar Messages

Problem with serial Number in Inspection Lot

Dear All,
I have a typical problem that material is there in quality inspection lot and serial numbers are aslo assigned during 101 mvt. but when I am posting it to unrestricted stock system is not determine serial number and giving an error
*Stock data of serial number XXXXXX not suitable for movement
Message no. IO231*
All configuration setting are also OK as this problem comes for the first time and previously we were able to clear inspection lots of that material easily with serial number.
Any Idea to rectify that problem?
Thanks
Edited by: Ashu on Aug 9, 2010 5:54 PM

Hello,
Check with your serializing Procedure check the assignment in Work scheduling View for this material also check in Quality view
for inspection type 4 for GR of Production order.
Regards,
JayaVimal

Hi guys i m new ....having problem with T42 ~~

Hi guys , as stated above, i m having afew problems with my laptop as it is my first time handling a com. i juz format my thinkpad 42 with my own OS.I have tried downloading every software in the webby but nothing seems to work..help guys ! wat do i need to download for a basic use lappy ? my model is t42 -2374-BV1, help in advance for your help guys .
btw guys i have seen http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&message.id=9515&query.id=1217... but it is not working..cause i dunno wat to download...i m real new to computer....like my nick.

computerNerd, welcome to the forum,
You can find all drivers for your T42 on this site. I suggest you start with the Intel Chipset driver and then the Ethernet driver, after this you should use System Update as suggested by stealthth as this will install drivers for you automatically.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

I bought a new MBA and are having problems with HDMI and VGA port

Hi,
I just bought a new mac book air, and at the apple stre they recommended me a mosh mini to vga cabel. I need to use my computer for projector either hdmi or regular vga adapte. The new mba only has thunderbolt, usb, memory/card slot, microphone and headphone ports.
Does anyboody has and idea how i will or how do i connect the hdmi or vga adapaters to the computer. I have been searching on the cables the apple store has available but the end that goes into the computer is not compatible with the ones I mentioned above.
Please any help would be of great help, because I dont know what to do. I think this is a problem with the new MBA.
thank you,

Thank you doubr. So what I need is to buy the thunderbolt cable and the minidisplayport to vga adapter or the griifin mini display port to hdmi tht toothpickproductions recommends, is that correct?
The one I have is a mini dvi to vga adapter and the end that goes into the computer is the same one that the minisdisplayport to vga adapter or the griffin one have, and is too big to go into the new mba. I dont know if I am confusing you more with what I am saying.
check the link below and you will see the ports the mba has
http://www.apple.com/macbookair/specs.html
if you see the ports that mba has, the two minidosplayport that are recommending do not fit..
So, do you know that if I buy the thunderboldt cable will either of the two minidisplay ports fit or I need to buy another adapter for the minidisplay ports??
thank you because I am kind of confused, I did not have this problem with the macbookpro I had before...

I have read up, and am still having problems with RSS Feed

Greetings Everyone.
I really need some help with my RSS feed before I go insane. I would like to think I know what I am doing, but obviously there is some little (or big!) step I am overlooking.
Ok here is my site: www.drewernst.com it is hosted by asmallorange.com
My pocast is at www.drewenst.com/podcast
This is the rss feed iWeb generated: feed://www.drewernst.com/podcast/The%20Jeff%20and%20Drew%20Podcast/rss.xml
Now, from everything I have read so far - it seems that as long as you get the URL right when you are publishing to a folder, iWeb should do the rest. Also, it is important to put the whole folder containing your podcast in your root web folder otherwise it breaks the feed. Both of these things I have done. (obviously not correctly, or it would be working!)
I read Many tutorials and topics I could find about this, but it still doesn't seem to work for me. Apple suggests taking the RSS feed an pasting it into itunes under Advanced menu "subscribe to podcast" to make sure your feed is valid before submitting to itunes.
When I do this, I get an message saying "there was a problem downloading... An unknown error occurred (-50).
I tried using a feed validator and it came back with so many errors. I just don't know that much about RSS, but i have been working on this for about a month and it's driving me crazy. No one I have asked at the apple store has been any more helpful than to suggest I just buy a .mac account and do it from there(honestly the nerve. wink.) I don't need .mac, I have my own website.
Thanks in advance.
Mr. Rss Crazy,
Drew
Oh, I tried to be as detailed as possible but if I left anything important out, please just ask...I will be watching this like a hawk.
iMac 2.0ghz Core 2 Duo Mac OS X (10.4.8)

So, my web-host said that it's a problem with the RSS feed, not there hosting.
They pointed me to "Feed Validator" which I looked at before. I have a lot of errors.
http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.drewernst.com%2Fpodcast% 2FThe%2520Jeff%2520and%2520Drew%2520Podcast%2Frss.xml
Shouldn't Garageband and iWeb have taken care of these errors. I don't even know how I would correct them. I thought this was supposed to be a 1-2-3 process, like the documentation of both programs said.
Sorry if I sound sarcastic, I am just frustrated.
iMac 2.0ghz Core 2 Duo Mac OS X (10.4.8)

NEW IN THE FORUM - HAVING PROBLEMS WITH FCE

Hi everyone!
My name is Mauricio and I am having problems in figure out how to use the FCE. I can copy my AVCHD files from my Sony CX100 but once I input it in the time line I can't(or can not find how) edit the frames and also how to mix music tracks with the original sound.
Please, could someone help a FCE beginner???
Thanks a lot for the time and attention.
Mauricio "Big Mac"

Welcome aboard Big Mac,
but once I input it in the time line I can't(or can not find how) edit the >frames and also how to mix music tracks with the original sound.
Normally you don't edit in the Timeline.
You move a clip from the Browser to the Viewer.
In the Viewer you select _in and out_ points to define exactly which part of the clip is required. If you don't define in/outs the whole clip will be entered.
Then move the clip to the Timeline. A simple method to do this is drag the clip in Viewer to the Edit Insert (yellow panel) Overlay of the Canvas. This will drop the clip at the playhead point in the Timeline.
Al

FCP 7.0 upgrade problem recognizing serial number

I am upgrading from FCP 6.0.6 to 7.0 on my new MacBook Pro but I can't get the installation disc to recognize the serial number. If I enter an incorrect number it will immediately say so, but when I enter the correct number I just get the spinning wheel. I've tried reinserting the disc, restarting the computer, etc. etc. but nothing will get it past the serial number page. The computer meets all the system requirements for 7.0. Also, I did successfully use the 7.0 disc to upgrade FCP on my MacPro desktop machine so I know the installation disc is not defective. Any ideas?

Thanks but that did not solve the problem. So, I went back in and uninstalled FCP 6.0.1 (following instructions on the Apple site) and reinstalled it. FCP 6.0.1 works fine but the upgrade still fails to get past the serial number input. I have another 7.0 upgrade disc here at work so I tried it to be sure it's not a problem with the disc. I did get a different result with the other disc: after inputting the 7.0 serial number, another prompt opened and asked me to input the original serial number for 6.0, which I inputted. Then it too went into spinning wheel mode. It must be searching for something and can't find it???

Problem with serial number while reinstalling CS6 Design Standard on new computer

I have a new Computer (Windows 8) and am now trying to install my Adobe Design Standard CS 6.
I bought that suite and installed it sucessfully on my old computer in Jan 13 as an Upgrade to Adobe Design Standard CS 5.5 (which was also an Upgrade Version from another Adobe Product).
When beginning the installation on my new computer today , I was asked for my serial number. The serial number for my Adobe Design Standard CS6 was accepted, however, that is only an Upgrade Version.
As the Product I'm upgrading from I chose the option Adobe Design Standard CS5.5 and gave my serial number for that product.
Then I got the message: 'Diese Seriennummer gilt nicht für ein kompatibles Produkt. Geben Sie eine andere Seriennummer ein', which means translated: This serial number is not valid for a compatible Produkt. Give another serial number.
I don't know why my Adobe Design Standard CS6 should not be compatible to my Adobe Design Standard CS 5.5 and I don't have another serial number.
Could you help me with this problem?
Regards
Eva

contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

I have a new Mac where do I find its serial number?

Where do I find my serial number on my new Mac?

Ralph Landry1 wrote:
The apple left side of he menu bar, About This Mac then click the Mac OS X version to get the build and a second time to get the machine serial number.
Good catch! Never knew that trick either. However, I have to click 3xs for the serial # to show.
Thanks for the heads up!

Problem with serial number Lr2 to Lr4 upgrading

Welcome. I have a problem in LR 4 I use Lr2 upgrade to L4. From time to time my PC lost the serial number of the program. I have to enter the new LR2 and LR4 number losing all presets. After reinstalling Windows 7 is still the problem exists. Is it possible to send me a new LR4 for installations already without error?

Your presets should not be lost even if you have to re-license LR4 with 2 serial numbers. Something else must be resetting things on your computer. Are you using System Restore?
Make a backup of your critical LR files elsewhere on your computer and if they are reset or lost, restore from that backup.
Your serial number Is stored in this file:
C:\ProgramData\Adobe\Lightroom\Lightroom 4.0 Registration.lrreg
Your presets are stored, here or with your catalog:
C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\[preset or template folder]\[preset or template filename.lrtemplate]
Your preferences are stored here:
C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 4 Preferences.agprefs
You can download LR 4.4.1 from here:
http://www.adobe.com/support/downloads/product.jsp?product=113 <http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows> &platform=Windows

Problem with serial number in LR

Hi I've to reinstall lightroom on my computer. I bought a version of lightroom last year, but now I can't find the executable on my computer, i followed the suggestion of a chat helpline on the site that gave me the link of the trial version and che serial to get the full version. That serial is the same serial i had in the first, now I'm tryng to fit this serial but the program says (translating in english) "the serial number is not valid" has someboy a suggestion to fix this problem!? Thank you for any answer, king regards!

Which version of Lightroom did you buy last year?
I assume your new download is 5.6 so you'll need to have a serial number for 5.x.
If your serial number was for an earlier version you'll need to upgrade or download a new copy of the version to which you do have a licence.
If your licence is for 5.x then it's possible you've been sent a link to the CC version rather than the standalone. If this is the case you'll need to un-install this a download from one of the following links instead.
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.6
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6

Problem with serial number with crossgrade

We are upgrading FCP 4.5 with crossgrade, but the old serial is not working. My understanding is that if you are upgrading from FCP 4.5, then you also need a new serial number. That we didn't get. Am I correct or did someone crossgrade from FCP 4.5 with old serial number?
G5 2.5GHZ and MB Pro Mac OS X (10.3.9) 4,5 GB RAM

I'm installing from scratch but instead of serial for 5.0 disks, I have serial for 4.5 disks. On other threads I read that you need new serial number for crossgrade from 4.5 to 5.1.
Examples:
http://discussions.apple.com/thread.jspa?messageID=4164956&#4164956
http://discussions.apple.com/message.jspa?messageID=2118979#2118979
Mac OS X (10.3.9) G5 2.5 G, 4,5 GB RAM

Problem with Serial Number when I tried to do the UD

Dear Colleagues,
I need your help with the issue below:
I have one material that Serial Number profile was not configured. The GR was done for 3 pcs, these material is to do the UD, but before to completed the process (UD) the material was changed and the Serial Number profile was set.
More 27 pcs were receiced, and for these pcs the Serial Number as created in the Material Document.
The user was not able to do the UD, and I requested him to use the t-code MBST to cancel the Material documents, but is not able to do this process for the Material Document that doesn't have the Serial Number (This is the fisrt Material document regarding that 3 pcs).
Now I have these 3 pcs for to make the UD and I'm not able, because I have an Error inform that I need to have the Serial Number, and I'm not able to cancel the Material document as well.
I want to know if we have some SAP Note, or one procedure that I can use to resolve this problem.
Many Thanks.
Orlando

At least you are entitled to the prize for having the longest topic description on the Support Forum.
Leo

Still problem with serial number

suddenly my acrobat pro doesnt accept my serial number any more. Some people had the same problem before.
can someone help? adobe is impossible to contact.
----nov 21, 2011
I own CS2, CS3 Web Premium and Design Premium and CS4 Design Premium. After not having opened Acrobat 8.0 or 9.0 in some time, when I opened 9.0 today it asked for a serial. I looked up my serial and entered it only to be told that it was an invalid serial. Needing to use Acrobat immediately, I then opened 8.0 and the same thing happened. so I called support and spoke with someone in India (of course) who, after a half hour had no explanation for the problem and no solution other than to re-install my apps, which I do not happen to have with me on the road. He did check the validity of my Adobe accounts and the serial numbers, but to no avail. I was out of time, so I had to revert to using Acrobat 7.0.
What's going on here? Has anybody else been experiencing similar problems recently?
nov 30, 2011
Damn, nobody replied to you and your problem. I have the same here: Acrobat Pro is updated automatically but now it cannot start up as it asks for a serial number and my CS4 number doesn;t work. It seems it isn't linked with the CS4 serial number or so.
ADOBE please help us out!!!

Which version of Acrobat?
Was it part of a bundled Creative Suite?

PROBLEMS WITH SERIAL NUMBER AFTER MIGRATING

I upgraded FCP a few months ago. Today, I migrated all the info to a new computer I just bought, and FCP asks me for a serial number. I entered it, but it now says that the serial number is the upgrade one, that I should enter the original, which I don´t have. Any ideas of what I can do?
Thanks in advance
I tried that thread (Library/Application Support/ProApps---), ProApps is not there, nothing...

If you upgrade software, you're always going to need the serial number of the previous one at one point or another.
If you registered the software with Apple and/or still have the purchase receipt, you may be in luck. Call 1-800-MY-APPLE and hopefully they will be able to help you.

Have a new FCP Studio 2...having problems with serial number

Similar Messages

Maybe you are looking for