Have a question about how to set up users and what they access

I have just loaded logic studio on my computer on my admin account but i dont want it on the any other account and when i log in to another account on the same computer the program shows up. How do you **** let the admin account use the program and not the users? what do i have to set and where? do i need to go into users accounts or sharing? i cant seem to find anything. thanks for the help.

Try looking at Parental Controls, in >System Preferences...>Accounts.
Alternatively, you could put Logic in your user folder (/Users/your user name/Applications) (you'll most likely have to make that Applications folder, as well as make sure permissions are set so only you can access it, by using the "Get Info" window.

Similar Messages

I have a question about how to contact HR with e-mail.

I read the rules about anything about HR is not allowed, but I also read to contact HR directly, so I won't ask anything further here. My question is, how? I searched for an e-mail, but all I have been able to find is a phone number I can't ring since I have no phone, just internet. Thank you.

Hello Dennis,
If you're a Best Buy or Geek Squad employee and do not have access to a telephone, then two alternative contact options exist for you: speak with your direct supervisor or use the My HR app within Employee Toolkit. If you are not a Best Buy employee, however, our HR support team will not be able to assist you -- these contact channels are for employee use only.
Thank you for your understanding, as well as for taking the time to post.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Want to get Match but I have a question about how it will work on a computer I don't normally use.

I used to use my parents computer to connec to my ipod. Since then I stopped using a computer and have only been using iOS devices. I was wondering if I sign into iTunes on my parents computer that has a bunch of songs ripped from CDs and buy iTunes Match and throw all the songs on there to the cloud then sign out from the computer will I be able to upload or even download those songs from the cloud onto my iOS devices?

An iOS device is only a client for iTunes Match. No scanning, matching or uploading is done from it. A computer running iTunes is required for that. However, any music you purchase from the store on an iOS device is automatically added to iTunes Match.

I have two questions about my podcast on iTunes - Image and Author

Hello. I have very recently added my podcast to iTunes, by submitting the RSS-feed that is given by wordpress (that's where I have my podcast homepage) It looks allright, and the feed includes Name of podcast, title of podcast shows, description and in some cases even length of the podcasts. There's two things not showing though, and that's an image for the iTunes page, and the name of the authors.
I'm not sure if you're allowed to link to your feed like this, but here is however the feed that I've sent to iTunes: http://rodrost.wordpress.com/category/podcast/feed/ . I thought that the picture up in the right (of me and a friend) would be the picture showing up on iTunes. And I don't understand where in my feed to put in the authors. If you could answer my questions I would be very grateful, thank you.
/ Joar.
(This is how it looks on iTunes http://itunes.apple.com/se/podcast/rodrost-podcast-podcast/id507886804 )

Posting your feed URL is not only allowed, it's necessary to get answers to most questions, so thank you for posting it.
You are missing some necessary entries in your feed. The second line of your feed should include the 'iTues declaration':
xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0"
which should be added within the 'rss' tag. Without this iTunes cannot read the 'itunes:...' tags which are in any case missing. The image is carried in the 'itunes:image' tag and your name in the 'itunes:author' tag, and there are other tags which carry information - your podcast is working without them but some information is as you see missing.
This page includes a sample basic feed so that you can see what I'm talking about:
http://rfwilmut.net/pc
I can't advise on Wordpress: it seems likely that you need the PodPress plugin to get this to work properly, but I'm not sure whether you can do it without.

Hi guys, I have a question about Apple is that which industry and sector does Apple belong to? I have read some news on the Internet but I haven't found out which industry and sector that Apple really participant in. So could you me to answer this please?

Hi guys, I do need your help to answer this question please. I wonder that which industry and sector does Apple belong to? I have read some news on the Internet but there haven't provided with specific source. So could you help me to answer this question please? Thank you very much <3

Welcome to the Support Communities. Apple Inc. (AAPL) is listed on the NASDAQ exchange where it is categorized as follows:
Industry: Technology
Subsector: Computer Manufacturing
(Source)
More info from Apple can be found here:
http://investor.apple.com

Script to display users and what they have spent

its giving me the username fine, but is not adding up the costs correctly just displays it as 100 for all users, have tried to change it but now its giving me a syntax error. any ideas?
insert into clubcosts(USER_NAME, TOTALSPENT)
     select
          u.user_name, count(cost)
     from
          users u, subscription_costs s, club c
     where
          u.user_id = c.club_id
     an
               (     select
                         null
                    from
                         club c2, subscription_costs s2
                    where
                         c.cost_id2 = s.cost_id2)
     group by
          u.user_name
)

user8652681 wrote:
its giving me the username fine, but is not adding up the costs correctly just displays it as 100 for all users, have tried to change it but now its giving me a syntax error. any ideas?
Many syntax errors in this. You shoul really try to build your sql statments step by step, not all at once. The select is and was never working.
just guessing
insert into clubcosts(USER_NAME, TOTALSPENT)
( SELECT u.user_name, nvl(sum(c.cost),0)
FROM users u
LEFT JOIN club c on u.user_id = c.club_id
LEFT JOIN subscription_costs s on c.cost_id = s.cost_id
GROUP BY u.user_name
);Furthermore if you get syntax errors it helps to read them and if you don't understand it, at least post them.
Edited by: Sven W. on Jul 24, 2009 2:44 PM

Question about SAP client setting when create new connection in CR2008

Dear All,
I have a question about SAP client setting in Crystal Report 2008 when I try to create a new connection use SAP OpenSQL(SAP Table,Cluster,or Function).
I have a SAP IDES environment with 5 clients.
While I try to create a CR standard report use SAP OpenSQL, I entered 800 into Client field in u201CUser logon credentialsu201D. The connection can be created and I can get table list. After I built a report ,I can not get data from IDES client 800, but I can get data from client 000.
I am sure client 800 has data.I checked client 800 table with Tcord se16.
I also did other tests and felt confused a lot.
Even inexistent client, such as u201C00u201Dand u201C8000u201D can be used for creating connection.
I just want to know how can I get data from client 800.
Thanks for your kindly help!
Wayne

Dear Ingo,
Thanks for your reply!
I am not sure about your suggestion clearly. What's your mean all the authorizations to use CR?
Maybe I should clarify my operations.
I logon CR2008 as administrator and created two SAP connections with different client.
There is a table named "/BEV3/CHBALLG" be showed in these connections.
I checked clients "000" and "800" both have data in the table.
I can use client 000 connection create report and get right data, but the report base on client 800 connection could not get data.
If change to another table,such as "/SAPDMC/LSOFIL", I can get data both form these connections.
I found one thing is very weird. Client "00" and "8000" do not exist in my IDES environment, but I can use them for creating connection.
May I have your further suggestions?
Wayne

I have a question about japan new depriciation engine using non-japanese chart of deprication

Hi, all
I have a question about link between new depriciation engine and chart of depriciation.
My client want to use US chart of depriciation as standard chart of depriciation becuase it has already standard setting like IAS deprication keys.
it means I have to create Japanese chart of depriciation by copying from US chart of depriciation(non-japanese sample(0JP))
I have a little doubt about it. In my previous project, I copyed chart of depriciation by copy from Japan sample Chart of depriciation(0JP) stored in SAP.
Is it possible to copy from non-japan sample charg of depriciation to using Japanese new depriciation engine? I worried some errors will occrues if I do not use sample chart of depriciation(0JP) .
If I need to use sample Japanese chart of depriciation, please give me the idea why I need to use Japanese sample chart of depriciation. I want to know the examples of non-Japanese asset accouting consultants who have working experience in the area.
Thank you.

Hi, Narasimhulu
Thank you for your support.
My client use one COA to all over the world. And not only Japan, other country aslo use the COD which is copied from that of US. Basic reporting line is for USGAP. I will customize 2 depriciation ares, one for US GAP and another is JGAP. No need to create TAX realted customize. It means it enought only adding Japanese new depriciation keys to Current US COD. No need to add more Japanese local requirements.
In this case, I want to know follwoing point.
I know COD controll depriciation keys, but I want to know more detail about COD, what kinds of controls COD do. What is Japanese local requirements. Why better to use COPY of JP COD.
Thank you.

Round trip workflow with proxies between Premiere and AE / a more general question about how these programs work?

Hi all,
I'm new to editing with proxies in Premiere and have some questions about how to handle the relationship with After Effects. Say I have a rough cut (with proxies) and I want to send it to AE to do some effects. The simplest thing to do seems to be to replace the proxies with the originals in Premiere, send the project to AE and do my thing. But if I then want to send the project back to Premiere, it will involve the original files, which are too machine-intensive for me to edit. In theory, it seems like there should be a way to send the project with original footage to AE, do effects, send it back to Premiere, and then replace it with proxies to do further editing while retaining the effects.
This leads to a confusion about how AE works. When I do an effect, am I correct in assuming that it does nothing to the original file? If that's the case, it seems like it shouldn't matter (in the editing stage) what file AE "applies" an effect to (proxy or original). But I feel like there's a hitch in this workflow. The same question could also be asked about going back and forth in Speed Grade.
Perhaps there is no real answer to this and the best option is to save effects and grading for after I have picture lock, but sometimes that's not entirely possible or convenient, etc.
Hopefully this makes some sense—It's a little hard to explain.
Thanks.

Hi Mark,
Here are the specific sections of the manual that should give you the best explanation regarding the Check out/in workflow for FCP projects in Final Cut Server:
Check out:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =5
Editing:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =6
Check in:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =7
-Daniel

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

I have a question about weblogic RMI , how can I resolve it.Thank you

I have a question about the weblogic RMI .
I have a program.web services+weblogic RMI +Data Sources When I run the program in the console application.it is ok.But When i run it with the web services(it 'is mean Get some parameter and run the different program).it's fail.The Exception is
cannot assign instance of yype weblogic.rmi.RMIServices_1033_WLStub to field demo.RMIServer_1033_WLStub.stubinfo of type weblogic.rmi.internal.StubInfo in instance of demo.RMIEsrver_1033_WLStub
how to resolve .Thank you.

Hi Charles,
Parental Controls has always had problems with https sites, no idea if it's fixed in 10.9.x or not.
When you setup your Mac it shouldv'e made an admin account, are you not running from that account, or did you somehow change it to a Managed account???

HT2506 Hello guys, I have a question about Preview - How do you loop a slideshow?

Hello guys, I have a question about Preview - How do you loop a slideshow?

Had the "loop" feature using Preview in 10.4.11; upgaded to 10.5.8 and it's gone. Don't you have to work at "Taking" it away? Makes no sense. Now you have to look for a third market for something that was included in Preview since the first version was launched. ....I don't get this one.

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hi ,
You might want to refer the following link to find your serial number and activate your software .
Here is the link for the same.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Let us know how it goes .We'll do the best possible to get your issue fixed.
Regards
Sukrit Dhingra

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”… If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

I hava a question about RMI,please help me!

Ladys and Gentleman,I hava a question about RMI.I wirte four little programs in java that is about RMI on my PC.
import java.rmi.*;
public interface AddServerIntf extends Remote{
double add(double d1,double d2) throws RemoteException;
import java.rmi.*;
import java.rmi.server.*;
public class AddServerImpl extends UnicastRemoteObject implements AddServerIntf{
public AddServerImpl() throws RemoteException{
public double add(double d1,double d2)throws RemoteException{
return d1+d2;
import java.net.*;
import java.rmi.*;
public class AddServer{
public static void main(String args[]){
try{
AddServerImpl addServerImpl=new AddServerImpl();
Naming.rebind("AddServer",addServerImpl);
}catch(Exception e){
e.printStackTrace();
import java.rmi.*;
public class AddClient
     public static void main(String args[]){
     try{
     String addServerURL="rmi://"+args[0]+"/AddServer";
     AddServerIntf addServerIntf=(AddServerIntf) Naming.lookup(addServerURL);
     System.out.println("The first number is: "+args[1]);
     double d1=Double.valueOf(args[1]).doubleValue();
     System.out.println("The second number is: "+args[2]);
     double d2=Double.valueOf(args[2]).doubleValue();
     System.out.print("The sum is: "+addServerIntf.add(d1,d2));
     }catch(Exception e){
     System.out.println("Exception: "+e);
And I compiled these files,so I got 4 class files(AddServer.class,AddServerIntf.class,AddServerImpl.class,AddServerClient.class).Then I use "rmic AddServerImpl" got another two files(AddServerImpl_Skel.class and AddServerImpl_Stub.class).Then I input command:rmiregistry,in another window,I input command:java AddServer,I got some exceptions,I was confused by these exceptions.The exception is:
D:\MyJava\rmi_3>java AddServer
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: AddServerImpl_Stub
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: AddServerImpl_Stub
java.lang.ClassNotFoundException: AddServerImpl_Stub
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
at sun.rmi.server.UnicastRef.invoke(Unknown Source)
at sun.rmi.registry.RegistryImpl_Stub.rebind(Unknown Source)
at java.rmi.Naming.rebind(Unknown Source)
at AddServer.main(AddServer.java:8)
But some times this exception will not appeared.Who can give me answer or suggestion,thanks a lot.
By the way,when I run shutdown.bat in tomcat_root\bin,I can get some exceptions:
C:\Tomcat\bin>shutdown
Using CATALINA_BASE: ..
Using CATALINA_HOME: ..
Using CATALINA_TMPDIR: ..\temp
Using JAVA_HOME: C:\JDK
Catalina.stop: java.net.ConnectException: Connection refused: connect
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:350)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:137)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:124)
at java.net.Socket.<init>(Socket.java:268)
at java.net.Socket.<init>(Socket.java:95)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:579)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:402)
at org.apache.catalina.startup.Catalina.process(Catalina.java:180)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)
I use Windows server 2000+JDK 1.3.1_04+tomcat 4.1.7

Maybe I am off base here but it seems to me the problem is the way in which you bind your server. The server must be bound to the same address and you are looking up from, i.e. "rmi://" host "/AddServer"
so
Naming.rebind("AddServer",addServerImpl);should be
Naming.rebind("rmi://127.0.0.1/AddServer", addServerImpl);to match
String addServerURL="rmi://"+args[0]+"/AddServer";
AddServerIntf addServerIntf=(AddServerIntf)
Naming.lookup(addServerURL);Hopefully this will solve your problem, if not it is a problem with your classpath. An easy way to make sure it can see your files is to set the java.rmi.server.codebase to point to where your classes are, e.g.
java -Djava.rmi.server.codebase=file:"c:\\cygwin\\home\\tweak\\keck_folder\\cmsi401\\RMIGalaxySleuth\\classes\\" AddServer
I had to set the codebas for my rmi stuff to work no matter how much I messed with the classpath.
Hope this helps,
Will

Have a question about how to set up users and what they access

Similar Messages

Maybe you are looking for