Have a Sony CX350V HandyCam. iMovie 10.0.2 doesn't recognise it, neither does iPhoto 9.5.1 so what can I do?

Have a Sony CX350V HandyCam. iMovie 10.0.2 doesn't recognise it, neither does iPhoto 9.5.1 so what can I do?

You may be better off posting or looking for answers in the i photo  community forum
and in the "More like this to the right of the page"
https://discussions.apple.com/community/ilife/iphoto

Similar Messages

  • IMovie 9.0.6 doesn't recognise videos in my iPhoto library anymore after update

    Just updated iPhoto & iMovie and now iMovie wont recognise the videos in my iPhoto library and there is no simple way of importing them.
    Any help'd be appreciated

    I had the same problem then solved it thanks to this Tip - see link or pertinent part copied below
    How do I trash the iMovie Preferences File? and Why?
    Also, sometimes iMovie will not see your iPhoto, or your Aperture, or your iTunes. This can also be fixed many times by trashing the preferences. In this case, look for a preferences file called com.apple.iApps.plist
    Many times people will suggest that you trash your preferences because it is the easiest thing to do. You want to try all the easy stuff before re-installing OSX, for example.
    If iMovie is still working, go to iMovie/Preferences and note your current preferences so you can easily re-enter them later.
    To trash your preferences, close iMovie.
    Then open the Finder.
    Press CMD + SHIFT + G or, if you prefer,  'Go > Go to Folder' in the top menu.
    Type: ~/Library/Preferences/     (Note: The Tilde ~ is on the uppercase position on the key to the left of the number 1 on your keyboard)
    Press Go
    Drag the com.apple.iMovieApp.plist file and/or the com.apple.iApps.plist file to the trash.
    Next, empty the trash.
    If you trashed the com.Apple.iApps.plist, then open iTunes, iPhoto, and Aperture so they are pointing at the library you wish to use in iMovie. (You can then close them.)
    Finally, restart iMovie.
    Remenber to go to iMovie/Preferences and re-enter your preferences. Be sure to enable the Advanced Tools.

  • I have a SOny MP3 player. I tried downloading thte software onto my MaBook Pro but it didn't work. Can I use the Sony with my MacBook?

    I have a Sony MP3 player. I tried downloading the software onto my MacBook Pro but it did not work. Can I use my Sony with my MacBook?

    What does Sony say?  Sony and Apple are not on the best of terms.
    Ciao.

  • I have new Sony A77 M2 camera and adobe Lightroom doesn't support its RAW files. Can you help? I have LR 5.4

    I have new Sony A77 M2 camera and adobe Lightroom doesn't support its RAW files. Can you help? I have LR 5.4

    You will likely get better program help in a program forum Photoshop Lightroom
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

    I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (114957)

  • My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.

    My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.

    Is the camera damaged? Could be a hardware problem.
    Try:
    Close the Camera app in the multitasking bar, then try again.
    Restart/Reset/Restore your iPod. In that order.

  • I am trying to access iTune store but keep on getting message "cannot access iTune store" i have reset my password several times and it didn't help. My apple ID has been confirmed as correct. what can I do next?

    Hi all
    i am trying to access iTune store but keep on getting message "cannot access iTune store" i have reset my password several times and it didn’t help. My apple ID has been confirmed as correct. what can I do next?

    I am having the same issue!  I see several people are having this problem, and I see there is no solution from Apple!  Why is it I only see problems on this site and never any solutions?

  • Please help! i have just upgraded to an iphone 5 for work, so i have started to backup my iphone 4 but it is stuck on 'finishing sync' and has been for 20hours!what can i do?i need it for work tomorrow

    please help! i have just upgraded to an iphone 5 for work, so i have started to backup my iphone 4 but it is stuck on 'finishing sync' and has been for 20hours!what can i do?i need it for work tomorrow

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I have a blue veritcal line going down the middle of my screen turned my iMac and it showed up. What can that mean?

    I have a blue veritcal line going down the middle of my screen turned my iMac and it showed up. What can that mean?

    Hard to help without knowing which variant of iMac you have. They've been in continuous production since 1998 in four major families, and what works for one familiy of iMac may not work to diagnose one from another family.
    Doing "About ths Mac" will show the processor info. Post what it says about your processor (and Mac OS version while you are there) and that will narrow what family of iMac you have.
    This forum section is for the three iMac families made before 2006.

  • I have just tried to download ios7 and my phone is now asing me to restore it to factory settings. What can I do?

    I have just tried to download ios7 and my phone is now asing me to restore it to factory settings. What can I do?

    Don't do the ios 7 update.  It is horrible.  I can't find half my games. 

  • I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

    I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

    Okay, regarding this problem:
    I'm trying to print to an Advent AW10 printer from an Imac running Yosemite 10.10.1 and it's been driving me nuts for the last two months...
    I got on to Advent yesterday and recieved this instruction from their support team this morning and it worked and I'm now printing away merrily:
    Please follow below steps:
    In Spotlight search window type Terminal and then press Enter.
    This should bring up the terminal window/program.
    In the Terminal type:
    sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' then press Enter.
    It will ask for your password. Please enter system password.(You will not see password entering)
    After that type following:
    sudo launchctl stop org.cups.cupsd then press Enter.
    Try Printing.
    I don't think this is specific to Advent and is rather simply an 'opening up' of something blocking the 'printer channels' (layman's terms obviously)
    Hope this helps people out!

  • TS3354 I purchased a movie, I have downloaded it to my IPad, when I click on my videos app, it's blank and nothing comes on, what can I do to watch my recently purchased video?

    I purchased a movie, I have downloaded it to my IPad, when I click on my videos app, it's blank and nothing comes on, what can I do to watch my recently purchased video?

    Have you checked that the App is compatable with your 2nd Gen iPod and its iOS version...
    The 2nd Gen can Only go to iOS 4.2.1

  • I have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

    i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

    You'll need to upgrade to Parallels Desktop 7 to regain compatibility.  Good luck....
    On Edit: A minute late!

  • I have selected purchased for an album on itunes (iphone 4s) 2 days ago and it is still saying downloading.  What can I do?

    I have selected purchased for an album on itunes (iphone 4s) 2 days ago and it is still saying downloading.  What can I do?

    ISHINNA wrote:
    please contact me as soon as possible with proof that it is yours i hope the person hasn't left my country yet
    How do you know that the owner lives outside your country?
    You are wasting your time here as whomever lost the phone will most likely not look here as this is not a lost and found.  If the phone is unlocked (doubtful) try calling some of the contacts on the phone so maybe they can reach the owner. In anycase turn it over to the police. They are probably better than you at trying to locate the owner.

  • I have a 2007 MacBook 2GHz intel core 2 duo and i want to update to either snow leopard or lion what can ido if i have 10.4 already.

    I have a 2007 MacBook 2GHz intel core 2 duo and i want to update to either snow leopard or lion what can ido if i have 10.4 already. please help

    You can upgrade from 10.4 straight to 10.6 with no problems. Any program that runs under 10.4 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/ 
    You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/   I recently upgraded an older MacBook (model 1,1) straight from 10.4 to 10.6.
    Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is $19.99.
    You must have at least a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Maybe you are looking for