Have a still folder with a question mark and OS on external HDD isn't loading onto the Mac Pro
Good Morning....... I'm having an issue with this Mac Pro I've recently purchased that came with an 500GB HDD and I added an 2TB HDD also, but it never had an OS on it and when you power on the Mac Pro, you'll get a still folder with a question mark on it. I am very determined to get this situation corrected!!! I had got a copy of Snow Leopard on a blank DVD from a friend of mine but nothing had changed or occurred when I put it in the optical drive & I even saved Maverick installation on an external HDD; it read the drive when I held down the option key during the startup chime, I choose the external because that’s the only volume it shown on the screen; nothing else!!! No sign of the copied disk, the two HDDs that's in the Mac Pro, just the external HDD with the OS on it; I choose the external with Maverick on it but it still doesn't read and then a still folder with the question mark appears..... Can someone please help & save me PLEASE?????????
Buy a retail copy of Snow Leopard, then we can "chat" and get you with a system installed.
Similar Messages
-
What does it mean when i have a flashing folder with a question mark in it when i try to boot up?
what does it mean when I have a flashing folder with a question mark in the middle of it when I try to boot the interface?
It means the system cannot find a bootable OS. Reinstall OS X.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!
Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben -
Hello all, I've registered here because I can't work out how to get my keyboard and mouse to connect.
The issue is that when I turn my mid-2010 iMac on it doesn't load up, but instead shows a flashing folder with a question mark. I've Googled this and have some idea how to fix it, the first step in all guides to fixing the problem states that you should hold the option key upon start-up. The problem I'm having is that I've just had to change the batteries on my keyboard and mouse and they are now not connecting. I can't see how to get the keyboard and mouse connected with the Mac stuck on the flashing folder screen, and I can't get the Mac past said screen without using the keyboard. Does anyone know how I can connect the two devices?
Thanks.The flashing folder with the ? mark indicates that a bootable system can't be found. You'll need to borrow a wired keyboard so you can boot into the Recovery volume (boot with the Command + R keys held down). From there you can reinstall the system and try a normal reboot.
-
I have a folder with a question mark and I hear the drive running I think my drive crashed
I have an imac intel duel core I run OSX 6.8 lately the gear has been hanging up a lot I keep haveing to shut down and force quit and reboot. yesterday a folder with a question mark showed up. today nothing shows up but I can hear the hard drive. I booted up the os dvd for SL and it wont see the hard drive. only the dvd player and idisk (which I can't use anymore ) I have disconnected my external storages. I am now on my mac airbook chatting to you.
Do you have any suggestions as to what to do?Probably a crashed HD. Please carefully read Apple's Flashing question mark appears when you start your Mac article for trouble shooting steps. As long as you have been backing up the system it's minor inconvenience of replacing the Internal HD and restoring from your backup. If you haven't been backing up then you are about to learn why backing up it's optional it's critical.
-
I'm not sure how this screen is appearing, but I tried powering up my computer this morning and it immediately presents a grey screen, then displays a blinking folder with a question mark in the middle of it.
I am looking for troubleshooting advice and procedures to bypass this screen and allow my computer to complete it's start-up.
Thanks-
Gary D. Aston, Jr.
[email protected]The folder with a question marks is usually an idication that the Mac can't find the system file to boot from.
Since you never told us which system your Mac was running there is nothing more to say.
Allan -
I have a problem with lion. My MacBook pro froze and now I get a gray folder with a question mark.
I recently upgraded to lion but my screen just froze. I had to shut it down by holding the power button down. Every time I tried to start it again I got a grey folder with a question mark and couldn't do a thing. I' ve been told to restore snow leopard but I dont want to loose my files or email. What can I do?
Boot from your recovery partition. Check and if necessary repair your startup volume with Disk Utility. You may need to reinstall Lion.
OS X Lion: About Lion Recovery -
At startup see a folder with a question mark
At startup I see a folder with a question mark and the system will not boot. Loaded install disk but it can not find the hard drive?
Mac Said:
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
if none of this works but you have to format the entire disk, which is not very fun forsomeone, and if you have important data on your disk that you need, how do you do?
yes I have a solution, but I do not recommend it unless you know what you're doing,
ask a technician who is this he will help you safely, otherwise send a pm to me.
first a little info about me, I'm IT technician then a couple of years and have never beena fan of the mac, and will probably not be there, because I think that off "giant optimized"systems have no security, personally, I want the mac to be release an update so it forcing / or remind the user to backup with time machine, so no I will not get me one of your machines, enough about that, I had a client who had this problem, (ps / something allhave to remember is that all customers are idiots and do not know what a computer realy are, that is why it remains "the rule 101"!
His desk was this apoblemet, and I am recommending not to open up his mac becausethis would guarantee his disappearance, he had also no backups at something so long story short, he was fu ***,,
However, he had all his business accounts on the computer and much much more, so hemade the choice to give me permission to open up the machine, I went through all theguides that were on the Internet and Disk Utility was not helpful at all, nor disk Wari disc to start up, even when I plug in the drive as an external drive on another mac wanted itabsolutely does not come up.
However, so when I connected the disk in a PC with Windows 7, install a program thatmade it possible to see the disk in my computer but could not go into it because then it said that there was something wrong, but then I thought for a bit spruce, windows can see all unknown hard disk format "RAW" guidelines for adding, then it's just to make a RAW backup (google it) and Woll! now i have a copy of all his data, would also like to point out that this may take time, so be patient.
[would also like to point out that if you choose to open the your mac, there is great risk that your warranty disappear, do so at your own risk!],
so if you really have to have a backup of data you need the following;
a PC whit windows
a Controller that convert SATA to USB
a program that makes creating a driver for HFS + disks
a back-up software for RAW drives
and last but certainly not least, patience.
/J -
My macbook pro displays a folder with a question mark and won't open. What does this mean and how can I fix it?
it means your HD and the software can't find each other, the following article tells how to troubleshoot this issue:
https://support.apple.com/kb/TS1440
hopefully you have backup of your data since sometimes this means the HD is crashing.
if the article doesn't resolve the issue i would take the mac to apple store or service provider and have it looked at, the following link tells how to find one close to you:
https://locate.apple.com
good luck!! -
Hi Everyone, I have tried all the solutions mentioned by apple and still have a white screen with a blinking file folder with a question mark in the center, anyone have any ideas or experienced this?
Nooo or you would use OS X Recovery Mode: Disk Utilty and then Startup Disk.
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718
ExpressLane
https://expresslane.apple.com/
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725 -
So I came to this problem a while ago. M ycomputer basically froze so I was forced to shut down by holding the button down. When I started it up I got the flashing folder with a question mark. I started it up holding down the command and r keys which brought me to disk utility. Although my computer doesn't read that I have a hard drive to start it up. When I click on the disk utility app, I cannot verify or repair anything either. The buttons won't allow me to click on them. It also shows "Mac OSX Base System" which shows I have files and what not saved. I had been told that I need a new hard drive so I bought and manually installed a OWC SSD 240GB drive and when i booted the computer up it booted up yo the operating system fine with all my files and what not on there. After about twenty minutes, it froze again. I forced a shut down, restarted and the same thing happened. I am not able to choose my SSD to boot up, although thats probably because it doesn't have an operating system installed on it??
i have a Macbook Pro 13" 2011
any help would be great, I'm overall confused.ryansaint11,
this isn’t Apple support; this is a user-to-user forum. We’re just fellow users of Apple products here.
If you want to boot from your SSD, then you should put the SSD where your HDD currently is, and put the HDD into the optical bay. (That setup will also get you the best performance.) At the moment, you’re still booting from your HDD. Note that you will need to format your SSD in Disk Utility [with the “Mac OS X Extended (Journaled)” format] so that you can install OS X onto it.
Since you have an Early 2011 model, it might or might not have originally come with grey installation DVDs. You will be able to find out whether it did or not by trying to use OS X Internet Recovery to install OS X onto your SSD. If it does not work, or if the installed OS turns out to be Snow Leopard, then it will have originally come with the DVDs, and you should purchase a replacement pair of DVDs from Apple or iFixit; those discs will have your MacBook Pro’s Apple Hardware Test and its iLife apps. If the installed OS turns out to be Lion, then it will not originally have come with the grey installation DVDs, and your Apple Hardware Test will be installed along with Lion, and your iLife apps will be downloadable from the Mac App Store. -
Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201 -
I have a first gen MacBook pro with intel chip. All of a sudden when I try to start up instead of the apple logo I see a file folder with a question mark. Phone support wasn't much help since it is a older machine. It's either a software issue or the hard drive went. Any ideas on how to fix if it's a software issue would be appreciated. Thanks a lot.
Thanks I tried that and when I click repair it tells me
Invalid volume header
Checking hfs plus volume.
Invalid b-free node size
Volume check failed
Error: the underlying task reported faliure on exit.
1 hfs volume checked
1 volume could not be repaired because of an error. -
My laptop opened with a grey flashing file folder with a question mark inside it . How do I open my laptop! I have tried force closing several times and restArting nope ! nada! Suggestions?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7, 10.8 or 10.9 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
My MacBook screen is displaying a blank screen with a folder with a question mark on it. Can't get it to respond. Tried rebooting and folder with question mark comes back up. Does anyone know what to do? Thanks.
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
Running a java program from a .asp page
i'm looking for someone in the community that knows how to run a java program on a web server ( not an applet) from a asp page. The server as IIS 5 and the jre1.3.1 any help or tips would be welcomed
-
Like many others on this board, I'm having trouble with Safari 5. When I run the program, it won't open a window. The icon in my doc gets a little blue active light under it, and the menu bar seems to think that Safari is running, but no windows will
-
Compressor doesn't convert the entire Blu-Ray file.
I have FCP 7. Tell me if I've done something wrong here. 1. I exported as a quicktime file a wedding video that is about 3 hours long. 2. The file is all their from beginning to end. I then drop it into compressor and set it up to export the 120 gig
-
Where are the Community terms and conditions?
I've looked and can't seem to find them. The web page: http://www.apple.com/legal/terms/site.html has an entry for 'Discussions Terms and Conditions' which is: https://discussions.apple.com/help.jspa. That link results in a page titled help but is
-
New Cartridges printing very light
Have a HP Photosmart Premium all in one C410 series. I put in new cartridges (not including photo only) and when the document print, it's so light you can hardly see anything on the page. Re-stalled the old cartridges and the same thing happens. P