Have a trial version, am not able to save a document after I've made changes.  Why is that?

Have a trial version, am not able to save a document after I've made changes.  Why is that?

Hi,
if you use Adobe Reader to view your PDFs you cannot save any changes by default.
To do this you need at least Adobe Acrobat to add additional Rights (aka Usage Rights aka Reader Extensions) to your PDF.

Similar Messages

  • When using Adobe Export PDF - I cannot save a document after converting from PDF.  Why not?

    When using Adobe Export PDF - I cannot save a document after converting from PDF.  Why not?

    What happens when you click the Save/Download button after the file conversion is complete?

  • MS Word not able to save open documents/quitting unexpectedly

    I've had the following problem more than a few times since I've had my iBook (just over a year): Sometimes when I have a Word document open that I'm working on I'll get one of two messages when I try to save the document. One says something to the effect that Word is unable to save the document because the "disk is full," or a message appears that says that Word can't save the document because too many "applications" or "documents" are open (I can't remember which one is specified). Then another box pops up that says something about "autorecovery" being postponed or unable to work. Finally - the icing on the cake - Word shuts down and a message about Word "quitting unexpectedly" comes up.
    When this sequence occurs, anything that I've written since the last time I saved the document is gone. Lovely. Who cares that I just wrote the clearest articulation of my thoughts for the day, right? (I'm currently working on my dissertation, so this is VERY FRUSTRATING, to say the least.)
    I have tons of space left on the hard drive, so I know that no "disk is full." Also, I find it hard to believe that having, say, two Word documents open along with DSS (an audio program for transcribing) is too much for the computer to handle at once. (I mean, if it were a PC, sure, I might be able to believe that this sort of thing could overload it and cause a hitch, but pleeease, with a Mac? Isn't that the whole reason I was sold on these fancy new-fangled machines?) Plus, this problem has also occurred when I have only one document open.
    Just to add a little more info. to the puzzle, I already reinstalled MS Office again, thinking that perhaps it just wasn't properly installed the first time. No change. I've also asked a tech through Apple Care about it, and he guided me through checking my hard drive for any damage, etc. We found nothing out of the ordinary. Finally, a friend who has the exact same copy of MS Office on his desktop Mac has never had any problem with Word.
    Any advice would be much appreciated.
    iBook G4   Mac OS X (10.4.5)  

    as first step try creating new user in Accounts system preference, log in as new user and try running Office.
    if it works that way, issue is with some preferences or cache files in the original user account.
    if it does not work under new user, issue is system-wide with Office specific files or the OS.

  • I HAVE DOWNLOADED NUMBERS BUT AM NOT ABLE TO SAVE SPREADSHEETS

    HOW DO I SAVE NUMBERS FILE - WHEN EVER I TRY TO SAVE NUMBERS FILE- IT SAYS PL DOWNLOAD IWORKS FOR MACAIR. I HAVE DOWNLOADED NUMBERS- AND WHENEVER I TRY TO DOWNLOAD IWORKS FOR MACAIR- THERE DOES NOT SEEM TO EXIST ANY IWORKS FOR MAC AIR
    I AM WORKING ON 10X7 MAC OS
    PL PROVIDE AN ANSWER SO AS OT HELP ME SAVE NUMBERS SPREADHSHEER

    Hi,
    I dont see anything in the configuration blocking ICMP to the interface IP addresses.
    Notice though that you can only ICMP an interface if you host is behind it. So hosts behind "inside" can ICMP the "inside" interface IP address. The hosts behind "outside" interface can ICMP the "outside" interface IP address.
    You cant ICMP "inside" interface from a host behind "outside" interface. You cant ICMP "outside" interface from a host behind "inside" interface.
    You can add
    icmp permit any outside
    icmp permit any inside
    But even without these interface ICMP should already be allowed.
    - Jouni

  • I am not able to save the pdf with filled data or related to reader extension

    Hi,
    I have designed a pdf with some text field controls. But i am not able to save the document when i fill some data into the pdf.
    or whenever i save data it says that the pdf will be saved blank.
    I know that this is the reader extension issue. How to i add this reader extension feature into it.
    I know that reader extension can be
    1. cached
    2. A document can be made reader extended using adobe live cycle process.
    3. also it can be embedded while designing the pdf.
    Can any body let me know how do i incorporate reader extension feature while designing and at runtime too.
    I know we have taken reader extension license but dont know how to use this reader extension feature.
    Regards
    Sunil

    Hi Sunil,
    You indicate that you have a Reader Extensions license, did you also purchase Adobe LiveCycle Reader Extensions ES2? You would apply the license to your form using this server product.
    You can also apply reader rights using Acrobat Standard v9 (or Acrobat Professional v8), but this has license restrictions - see EULA. Also the rights that are enabled using this route will not be as many when compared to LC Reader Extensions ES2.
    I have a summary here:
    http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
    Also have a look at the Adobe page:
    http://www.adobe.com/products/livecycle/readerextensions/
    Maybe talk to the Adobe sales in your region.
    Good luck,
    Niall

  • I cannot able to save indesign document using sdk?

    hi,
       i opened a indesign template using sdklayouthelper file and then update the text content in the template.After that i try to save(using sdklayouthelper file saveDocumentAs method) but i could not able to save a document as xxx.indd.
    pls,anyone give me the guidelines for save a document?
    thanks,
    screen410099.

    Please don't post the same question multiple times; someone will get to your post when they know the answer.

  • I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

    Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

    (Apologies for butting in, wha.)
    now older version is not able to connect to itunes store error 306. I am using windows 7.
    If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
    iTunes for Windows 9.0.x: Error 306

  • How do I get the audio playback from the source monitor to work? I have the trial version of the latest premiere and the audio works in that but not cs6

    I have the trial version of the latest premiere and the audio works in that but not cs6

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    -especially your sound hardware, and the details of your video

  • I can not open files FH11, Is it because I have the trial version of Illustrator CC 2014?

    I can not open files FH11, Is it because I have the trial version of Illustrator CC 2014?

    FH support has been dropped in CS6.
    The FH plugin from tensai.co.uk should solve your problem.

  • I have the trial version but my cloud libraries are not showing up. Is this a limitation of the trial version?

    I have the trial version but my cloud libraries are not showing up. Is this a limitation of the trial version?

    Hi Amy,
    Can you please let me know about the AI CC version on your machines ?
    WIN: AI menu Help >> About Illustrator
    MAC: AI menu Illustrator >> About Illustrator
    The Libraries panel is shipped in AI CC 2014.1 release. If the AI CC version is not AI CC 2014.1 than please update AI CC 2014 using the creative cloud application (quit & re-launch the CC app).
    Thanks & Regards,
    Raghuveer

  • Q : i have downloaded trial version of creative cloud ... kindly help to start trial on it ... it is not opening only

    Q : i have downloaded trial version of creative cloud ... kindly help to start trial on it ... it is not opening only ?

    What do you mean?
    Cloud desktop problems
    Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
    -and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    -and 'looping' https://forums.adobe.com/thread/1504792
    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    -Similar in Windows https://forums.adobe.com/message/5853430

  • Do not have a trial version of Acrobat Pro

    Acrobat pro has shut down and is telling me that my Trial period is over...I don't have a trial version, I am paying monthly for a years subscription which ends Oct 2015!!  Please help.

    When the licensing fails, it reverts to a trial, so clearly that has happened here. So, in fact, you do have a trial, but we need to get the licensing fixed.
    Now, since you have a subscription there is no serial number to worry about, but you do need to sign in. Did you do that?

  • I have a trial version of LiveCycle.  I purchased LiveCycle, but I can't get it to download, I get "Error processing..."

    I have a trial version of LiveCycle.  I purchased LiveCycle, but I can't get it to download, I get "Error processing...".
    So I tried to find in my trial version where I can input my Serial Number, but I can not find it.
    My trail version is about to expire and I NEED to get this working!!!!!
    Please help! 

    Seriously!  Now I am so frustrated I am crying.
    WHY can’t I get a simple answer to my question?
    I keep going around and around in your system and I can’t talk to anyone.
    There are no chats that I can access.
    All I want to know is what do I do now?  How do I get the purchased version of Live Cycle?
    I went onto MY ORDERS, found the Order #, but there is no DOWNLOAD available.  So I clicked on the ENGLISH Version to Download and I get an error message.
    TRULY no one should have to waste this kind of time trying to do something SO SIMPLE.
    Is there a support number I can call?
    Thank you, I do appreciate being able to (at least) discuss this in email format.  Next best thing would be able to actually TALK to someone.
    Cindy Cameron
    President / Software Developer
    COBRA Business Operations Software, Inc.
    COBRA Contractors Software
    P: 952-933-2507
    F: 952-767-0874
    W: cobra-usa.com
    E:  <mailto:[email protected]> [email protected]
    Description: Our_Focus_You

  • I have a OSX version 10.7.5. On Safari mail I can no longer see the information that usually appears at the beginning of an incoming email, like the date, senders details etc. What do I do to be able to see this again?

    I have a OSX version 10.7.5. On Safari mail I can no longer see the information that usually appears at the beginning of an incoming email, like the date, senders details etc. What do I do to be able to see this again?

    No, I get my mail on my computer, not on a website. I used to be able to see the information but in sorting another issue I must have changed a setting or something. I have gone to View. Under Message Attributes most things are ticked but many of them are not bold print i.e. they are pale grey. I don't know how to activate them again.

Maybe you are looking for

  • Multiple layouts for the same user in the same portal

    Hello. I have a challenge. Currently there is a portal (6.40) running as a frontend for an application. So the portal is used for only this purpose. The content is a changed masthead and a number of WebDynpros and UWL's all accessing the same backend

  • Can't record video or audio with my MBP's isghit

    Everytime I try to record a video or a sound using quicktime and the isght in my MBP an error message saying the "recording could not create a file" disk may be full or not writeable". my disk is not full for sure... any ideas? Thanks

  • .SWF File cannot be launched on Windows XP

    When trying to launch a SWF file, "MyFirst.swf", Windows XP informs me of the following: << Windows cannot open this file What do you want to do? 1.- Use the web to find the programm 2.- Select the programm from a list >> [NB: I've translated Windows

  • Creating new OLap Variable

    Hi Experts, I want to create a new variable for using at data extractions. How can I do that, I tried it at CMOD but I couldn't see my variable at the OLAP Variables list how can I see it in the list ?

  • Why doesn't jre support some fonts?

    Like Bright - it's a monospace font, I've installed this font, but I can't use it in jedit. Why?