Have an iMac. Problem is I hear the fan noise, yet no power on the screen yielding no power. I have checked the power cord and it seems to be fine. Not sure if computer is a total loss. What would be the next step?
Have an iMac. Problem is I hear the fan noise, yet no power on the screen yielding no power. I have checked the power cord and it seems to be fine. Not sure if computer is a total loss. What would be the next step?
<Email Edited by Host>
What does the EMC# say on the base?
Similar Messages
-
i can not connect to wifi or celluer what would be the problem with my i phone 5
Hi chege,
If you are having issues establishing a connection to either Wi-Fi or cellular with your iPhone 5, you may find the following articles useful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
Brenden -
Got new computer with windows 8.1 and installed latest itunes, went to update music library on my nano 5th gen and plugged in recognized in my library but when it synced , it said sync was complete but did not update at all, then reset the ipod to factory , BIG MISTAKE plugged in again and it did the same thing except now I have no music on at all it syncs but will not put any music on , previous computer had xp on it, what would the problem be and what would solution be????
Thanksc) unistalled and reinstalled iTunes
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?
Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data. -
I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up
Could be since it (security software) is listed as #5 in the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
i have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?
The two most likely culprits would be a faulty cable/charging block or a bad digitizer. Try charging the device with a different charger and cable. If the problem goes away, then the problem is with your charger. If it does not, try the basics of resetting, restoriing from back up, restoring as new. If you still have the problem, make an appointment at the Genius Bar at your local Apple Store for evaluation.
-
I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
I have CDs, legally purchased and uploaded to iTunes (v9.1.0.79)...they were on a harddrive and now I tried to play on my new computer (iTunes v11.0.2.26), but whilst the files appear intact they skip through each song in seconds...why? and how to fix?
I don't recognise the symptoms as such, but here are a couple of things to try.
Check all tracks
Unchecked tracks are skipped during normal track to track playback. Go to the Songs view and CTRL-click on an empty checkbox, or CTRL-click on a filled one twice. This will ensure all tracks are checked.
Repair permissions
To make sure that your iTunes folder (or media folder if located separately) has the correct permissions, right-click on the folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but later versions of Windows shouldn't be too different.
You can also clear the Read-Only flag for the entire library from the Properties dialog.
tt2 -
I have I pad 2, and I recently reset my password. And now I am not able to upgrade my old apps. Usually it will not ask apple password, but now it's asking password and when I type the password ir says the password is wrong. What would be the problem?
If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I have an ipod shuffle 1st generation. it will work ousing usb port in car or on computer but i can not get it to play using headphones. what would be the reason for this.
Sorry for the typos, I hope my message still gets across!
-
I have Photoshop 12, installed online. My computer crashed and was repaired, but Photoshop was not restored. I see it in my products, along with the serial number/activation key, but no download is available. How do I re-download my product?
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat.
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
update unless you will boot from this drive and install the update on it.
Reconnect it and turn it back on after installation is complete and you've
restarted.
2. You may experience unexpected results if you have installed third-party system
software modifications, or if you have modified the operating system through
other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
interruption occurs during installation, use the standalone installer (see below)
from Apple Downloads to update. While the installation is in progress do not use
the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1. -
my iMac has been slow to respond for about 6 months and it is getting worse, beach ball is here a lot I have tried a few different things and nothing works. i am not sure if i need to take to an apple store or what any tips or suggestions would be appreciated
Well it doesn't appear the easy guess is going to help in your case, sorry.
So here are the heavy guns on performance that Dr. Smoke has written up
http://www.thexlab.com/faqs/performance.html
I hope something in this web site is able to help you.
Allan -
I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.
The box displayed:
Missing subVI NI_AALBase.lvlib:1D Linear Evaluation.vi in VI NI_PtbyPt.lvlib:Linear Fit PtbyPt.vi
Missing subVI NI_AALPro.lvlib:MSE.vi in VI NIPtbtPt.lvlib:Linear Fit PtbyPt.vi
What do I need to do to bring the correct library into the transportable code?Hello,
I was unable to reproduce the behavior that you saw. I was able to deploy my application with the Linear Fit PtByPt without issues.
Could you attach the smallest piece of code that reproduces this behavior so that I can test it as well?
Justin Parker
National Instruments
Product Support Engineer -
I have a Samsung HD TV and I purchased a Mini Display port to HDMI Adapter today. For some strange reason I get no display on my HD tv. I even tried switching a few HDMI cables and nothing popped up. I made sure my computer performed all software updates, and I even tried calling Apple Support. They just told me to keep trying different hdmi cables and see if anything pops up. Does anybody know what the problem is? My HDMI cable is from "rocketfish" also my display port is too.
You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits.
Maybe you are looking for
-
What is the significance of T code MR11 - maintain GR/IR Clearing Account .
Dear Experts , Can anyone tell me the significance of the t code MR11 - Maintain GR/IR Clearing Account ? What sort of data is displayed in it & what happens when we post the items ? Regards Anis
-
I'm using version 1.5.1.54.40 on Windows XP. Everytime i try to open a file it first tries to open A:\ and give me an error. I assume there is a preference i can change, but i cant figure it out. Thanks for your help.
-
Podcast doesn't Appear in iTunes Search
Hello to all, Like many I am experiencing this very anoying problem. My podcast was accepted by Apple on the 1st of January. I was sent this phobos: http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=271148581 But after more than a mont
-
[solved] fancontrol - fan speed doesn't seem to change after boot
I used fancontrol to control my fan but after I rebooted it doesn't seem to speed up the fan when it hits MAXTEMP whereas it did before I rebooted. Before the boot I set the CPU governer to performance (3.1Ghz) to heat up the cpu to test the fan cool
-
Hi, Does anyone know where i can find a cable like this one in the UK : http://www.newegg.com/Product/Product.aspx?Item=N82E16812270262&cmre=bytecc_mini_displayport-_-12-270-262--Product It's basically a mini displayport - displayport cable so that i