Have an image as title and form underneath?
Hi, I'm trying to put an image on the top of my Midlet. Currently it has a form as a 'init' with a few items in it. The problem is I want an image as title intstead of String title. Can i remove the title in form and kind of move it down so that i can put an image on top of my form. if so, can you guide me how please (classes methods). Or is there any other possibilities like form in canvas maybe?
thanks
indy
You can't change the Form title by an Image. One thing you can do is put an ImageItem the beginning of your Form, looking like a title. This way you can control the Image alignment and other things.
Raphael
Similar Messages
-
my ipod is frozen..i have an image of itunes and the power cord on the ipod screen
What happens when you connect the iPod to your computer and try to restore via iTunes on the computer?
-
The itune card I have has a bar code and numbers underneath, however some of the numbers are missing is there anyway I can use this card?
Hi,
Here is a Support Article that will help:
http://support.apple.com/kb/HT6021
Cheers,
GB -
I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
Thank you in advance!
StephanieIt can be done with Show/Hide buttons:
Here's a button created from a small version of the image (notice that it's selected in the image below):
The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
The large image is also turned into a button (shown below):
Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button. -
Do I have to get a new iPod to fix the updates of these apps?
Hi there Skatermom14,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
Have iPhoto image titles been erased with Photos?
When I used iPhoto, I gave all my images explicit titles, and my albums were organised by those titles. I've now migrated to Photos, but all the images seem to be untitled, so I can no longer sort by those titles. Is there some way the titles can be retrieved, or does Photos not use user-defined image titles?
A little bit more exploration has revealed that the titles are not lost. If I select an image and 'get info', the title I gave appears - presumably that is the image filename. But to give the image that title back, I have to copy and paste. Is there any easy way of doing that for the 6000 images already in my Photos library?
-
dear all
i have form 6i with image item
i was use database 9i
in the table i define the column as blob
there is no problem in database 9i
but when i go to database 10g
i cant query the data that have the image using the same form
so how can i use forms 6i to view, or store image on database 10gi have the same problem and i read that patch 13 solve this problem put i installed that patch and still have the same
any ideas
Edited by: egyhamada on 14/04/2009 02:49 ص -
Ibooks author inspection widget: grayed-out title and caption options when object is selected
I'm trying to add titles or captions to photos in an iBooks Author project. I select the photo, click on Inspector and Widget, then Layout. The only active option on Layout is the Accessibility Notes. Is this a bug? What am I missing?
Right.
You can create text boxes next to an image for title and caption, but otherwise, those are attributes for a widget with media. -
WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms
Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
SriHi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak -
Images in Portrait and landscape
I am trying aperture 3 on trial, I moved some images across from iphoto and now I have every image in portrait and landscape, how can I change this?
Mine are currently working when set to "Inline (moves with text)" and each takes a little adjustment. This is not satisfactory for me either. - Fabe
-
Image zooms in and bounces. How do I fade out?
Getting my feet wet and trying a routine event. Have an image
zooming in and bouncing. That works. What I want to do is fade the
image out after it has stopped bouncing. How do I fade it out? Here
is what I have:I came up with the below bit of code. But now the image fades
and then re-appears -
most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter the title in iPhoto. why the inconsistency? running OS 10.9.5 and using iPhoto 9.5.1
Try this: select one of the photos that are showing the wrong title and use the Photos ➙ Batch Change ➙ Title to File Name menu option.
See if that will put the name that you want under the thumbnail. -
hi,
i have a sharepoint custom list with Title and image attachments, now i want to display image attachments in div based on the title.i am using the below code only
SPSite mySite = new SPSite("http://sharepoinsiteaddress");
SPWeb myweb = mySite.OpenWeb();
SPList myList = myweb.Lists["Announcements"];
SPListItem myListItem = myList.GetItemById(1); foreach (String attachmentname in myListItem.Attachments)
String attachmentAbsoluteURL = myListItem.Attachments.UrlPrefix // gets the containing directory URL
+ attachmentname;
// To get the SPSile reference to the attachment just use this code
SPFile attachmentFile = myweb.GetFile(attachmentAbsoluteURL);
// To read the file content simply use this code
Stream stream = attachmentFile.OpenBinaryStream(); StreamReader reader = new StreamReader(stream);
String fileContent = reader.ReadToEnd();
here i am using panel, how can i attach this attached image to panel -
In CS^ when I have 2 photos inthe title bar and one is greyed out tutorials tell me I can rag the opened photo onto the greyed title to create two images in the layer panel. It does not wrk even if I unlock them or use duplicates. Modify keys don,t help. What is wrong ?
First select the Move Tool
Drag the source picture to the tab of the destination picture
The tab will open to reveal your destination picture, do not release the button yet, but drag the move tool onto the destination picture.
Then release the mouse button.
Tell me how you did.
Gene -
I want to generate a report with the report generation toolkit in LV7.1.
In that report I use several report VIs to append text, titles and frontpanel images to a word document template (Office 2003). That works fine.
Depending on the size and text of my generated report, I have sometimes a problem with pagebreaks: A image is set to a new page if there is not enough space to place it on the old one. That’s ok. The text/title above the image is still on the old page. That's right, but I don’t want this. I know in Word you can use the paragraph formatting options to avoid a separation. But with the corresponding VI from the toolkit (word format paragraph (adv)) it seems not to work. With this VI you should have access to "indents and spacing" and to "line and page breaks". I always and only can change the "indents and spacing". En- or Disabling line or page breaks with this VI does not work, nothing changes in a word document.
Has anyone some suggestions or other solutions?
Thanks in advance!Thanks for your input. You are right, that works and could be an alternative.
In the meantime I found a solution with creating my own activex vi instead of that from the toolkit as you can see in the attached image. Maybe this could help someone with similar problems...
Attachments:
KeepWithNext.JPG 46 KB
Maybe you are looking for
-
Nokia X7 Unresponsive after Install/Uninstall
Hello, I have a Nokia X7-00.1 RM-659 running Anna 22.8. Whenever I insatlled or uninstall an app, the phone becomes unresponsive after the operation is finished for 20~40 seconds. After that, normal operation resumes. As if the phone is scanning/thin
-
Joining a Domain on my new server
I've just set up my AD domain on Windows Server 2008 R2. I've added users to domains before but right now I'm completely blanking on what steps I've missed. Basically so far I have ran DCPROMO and set up my FQDN, the computer name is server and lets
-
Does the "X" in XLTE stand for Extra Slow?
When XLTE was introduced they forgot to tell us the "X" was for extra slow. Ever since the NEW and IMPROVED XLTE service has come out my performance has been cut in 1/2 or worse. Before XLTE it averaged 6-8 down now it averages 2-4, Before XLTE it a
-
Hi , Could any one please tell me abt small form-factor pluggable (SFP) ports ? what exaclty is its function ? regards Neo
-
I want to call a javascript if User clicks on a button and the text field is empty. here is the button and the text field: <cfinput type="file" name="custCartFile"> <cfinput type="submit" name="submit" value="Add Image"> Thanks, Trint