Have an image in vertical view

has anyone found a solution for this? image in horizontal view are shown but turned vertical disapear.

The solution is to turn the image into a widget. Just go to Info, widget pane (last pane) and add title or caption - the image will become a widget.
Widgets will show up fine on the left side in portrait mode.

Similar Messages

  • Only some pictures have preview images in 'Years' view

    Has anyone else encountered a problem where many pictures have a preview image, but no matter how long you leave Photos running, some pictures' preview image is just a grey square? Is there any way to manually make Photos go through and build preview images for every photo?
    Screenshot below.

    macopp wrote:
    Here you go...
    What the heck happened to your auto-sync enable button! - is this some difference in Mac vs. Windows or something .
    (My screenshot was from Windows version).
    Maybe you'll have to use the Metadata menu to enable metadata auto-sync, e.g.
    macopp wrote:
    Yes, version 5.3.
    OK - good...
    macopp wrote:
    I think you're giving up too easily. There are some quirks in Lr's keywording to be sure, but if you are going to use Lightroom, and you want to keyword your images, it pays to learn those quirks and how to overcome...
    Yes I totally am! But sometimes keeping it simple (like using collections instead) gets the job done.
    Well, only you can determine if it's worth your while - not sure what to say...
    ........lots of stuff answered by Richard.......
    ........lots of stuff answered by Richard.......
    ........lots of stuff answered by Richard.......
    macopp wrote:
    is there a way to show multiple, larger images in develop mode?
    If you have multiple monitors, display the grid on the other monitor (see Window menu)
    macopp wrote:
    Thanks heaps for you help.
    Cheers
    Not sure how much help I've been, but you're welcome just the same.
    Cheers 2U2,
    Rob

  • 3 column vertical view

    So i am switching over from Outlook '03 to Mail 2.0. In outlook I could have a three column vertical view of my mail. this would be great on MacBook with its widescreen. It maximizes the number of emails listed by spanning from the top to bottom of the screen and lets one read more on an email with out scrolling.

    > rjkg.com/GS.html), but the center and right columns are
    being pushed
    > down in
    > IE. Here's the css (navbar is left, headlines is right,
    and content is
    > center):
    >
    > #navBar{
    > float: left;
    > width: 20%;
    > margin: 0px;
    > padding: 0px;
    > background-color: #ffddbb;
    > border-right: 1px solid #cccccc;
    > border-bottom: 1px solid #cccccc;
    > }
    >
    > #headlines{
    > float:right;
    > width: 20%;
    > border-left: 1px solid #cccccc;
    > border-bottom: 1px solid #cccccc;
    > padding-right: 10px;
    > background-color: #ffddbb;
    > background: #ffddbb;
    > }
    >
    > #content{
    > float: left;
    > width: 499px;
    > margin-top: 0px;
    > margin-right: 0px;
    > margin-left: 0px;
    > }
    >
    > What do I do to make it showcorrectly in IE?
    >
    > Also, in Firefox, the center column isn't actually
    centered between
    > the two
    > sidebars, but I'd like it to be. Any clues?
    20% + 20% + 499px = ?
    You can't mix measures like that. Try replacing 499 with 60%.
    Your float
    will now drop in all browsers. Why?
    20% + 20% + 60% = 100%
    But the borders and padding you've assigned are added to the
    width,
    resulting in another mathematical improbablility. The easiest
    way to fix
    that is the remove the padding and borders from the main
    boxes and then
    nest content boxes inside the main boxes. Assign your borders
    and
    padding to those nested elements.
    Al Sparber - PVII
    http://www.projectseven.com
    Extending Dreamweaver - Nav Systems | Galleries | Widgets
    Authors: "42nd Street: Mastering the Art of CSS Design"

  • I have a problem with vertical images burned on a cd

    I have a problem with vertical images burned on a cd either from a Mac or a stand alone burner. What happens is the images come from the card and are put on the cd. Also note the the camera has been set for the computer to automatically show images vertically when shot that way. The images look good on my Mac, but are horizontal on windows computers. Both XP and Vista. What can be done?
    John

    Hi, thank you for the response... not sure looks that the battery its ok, I'm not sure.
      Charge Information:
      Charge remaining (mAh):    4356
      Fully charged:    Yes
      Charging:    No
      Full charge capacity (mAh):    4356
      Health Information:
      Cycle count:    813
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    0
      Voltage (mV):    12571

  • Is is possible to have the images as thumbnails and make it so you can click on them for a larger view and then click them again to have it go back to the original size? In an interactive pdf?

    I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
    Thank you in advance!
    Stephanie

    It can be done with Show/Hide buttons:
    Here's a button created from a small version of the image (notice that it's selected in the image below):
    The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
    The large image is also turned into a button (shown below):
    Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button.

  • How do I have an image move with a text box?

    I need to embed an image within a text box so that when I add additional text in the future, the image moves with the text that surrounds it.
    For example, if I have a paragraph of text, then on the following line vertically I have an image, then on the following line another paragraph of text ... When I add additional paragraphs of text above the image, how can I have the image track down to stay between the original two paragraphs of text?

    Thanks Zak!  I figured that out but now have another problem that I just posted. The app keeps locking up when I try to export HTML or upload my site to the server. Please give me any advise on how to handle it.
    Here's my other post:
    Hi,
    I just upgraded to the latest version of Muse. I made a few changes to my site and I'm trying to export the HTML. I've now tried 3 times and the app locks up at 89%. It completes all pages, but locks up there. When I look into the Muse Export folder, there is nothing there. The window reads "Finishing export" but it stays at that point for more than an hour when I finally give up and force quit.
    Any ideas? Anyone else having this issue? Any ideas on how to get my HTML exported successfully?
    Thanks in advance for any help!
    Reply
    27 Views   2 Replies   Latest reply: amchambers,      May 26, 2013 9:23 PMWas this helpful? Yes   No
    Replies
    20 posts
    Sep 19, 2012
    1.amchambers,May 26, 2013 9:18 PM   in reply to amchambers
    Just an update. Previously I was attempting to export HTML to the Muse Export folder on my computer. I described what happened above. Now, I'm trying to publish directly to my FTP site. Its doing basically the same behavior where it exports all desktop pages (189 of them) then it locks up. However, the interesting thing is that when exporting to the Muse Export folder on my computer this said it was 89% complete. When uploading to my server, it says its 59% computer when all pages have been exported. Both options result in the app locking up and never completing the export. I did check my site online to see if the pages were really updated. I made a change to the nav bar on the master so I should see that on every page. It is not showing up online yet even though the app says all 189 pages have been exported. Still looking for help, all advice and ideas will be appreciated! I do want to get my updates online.
    Was this helpful? Yes   No
    Reply|
    Mark as:
    CorrectHelpful
    20 posts
    Sep 19, 2012
    2.amchambers,May 26, 2013 9:23 PM   in reply to amchambers
    Here's what I have when it locks up. It sits like this for hours.

  • Display Image in Power View and Power BI

    Hi all,
    I need to create a report in power view where i need to display images in tile. I have found one solution to do so, to store the images as a binary data in data model table using the following link
    http://www.sharepointanalysthq.com/2014/09/adding-data-bound-images-to-power-view-with-power-query/comment-page-1/#comment-87049
    I tried this but still not able to show the images.
    Please anyone can help me with solution in detail.
    Thanks,
    Piyush Jain

    Hi Piyush,
    are you storing your Data in an Excel Power Pivot model?
    Make sure to follow step marking the column containing the Pictures as Data Type Binary.
    Are you using jpeg or another picture format?
    Best,
    Mark

  • Lightroom 5 is distorting my images in Develop view

    When working on images in Develop, Lightroom 5 is distorting them. For example, let's say I'm looking at an image in Library view (fig.1), then switch to Develop view (fig.2) — the image is suddenly compressed horizontally (or stretched vertically, however you choose to describe it).
    At other times, images get distorted and rotated (fig.3). And at other times, images were appearing as though a sharpen filter had been applied with accented highlights — but this particular distortion doesn't seem to be happening anymore.
    This does not happen to all images in the catalog. I'm running LR 5.2 on a 15" MBP with 16GB ram and a 1.2TB fusion drive.
    Any help is greatly appreciated. I'm late on a deadline beause of this, and other local (NYC) experts, as well as Adobe phone support, are as stumpted as I am.
    fig.1    
    fig.2    
    fig.3    

    Did you find an answer?  I'm having the same issue with LR 4.4.  It didn't happen with 4.3
    The only thing I've found to fix it is re-reading the MetaData file for each affected photo and it is taking forever.

  • How to display a image in webdynpro view using a bytearry

    Hi Frndz..
    How to display an image in a view using webdynpro java ..i have bytearry object in context ..like
    *byte[] img = wdContext.nodeYywwwdataImport_Input().nodeOutput().nodeOutMime().currentOutMimeElement().getLine();*_
    by using this i need to show image in view..
    Kindly help me ....
    Thankas in Advance
    Regards
    Rajesh

    Hi,
    byte[] img = wdContext.nodeYywwwdata_Import_Input().nodeOutput().nodeOutMime().currentOutMimeElement().getLine();
    use this code to create resource and you need to set this value to the context created to display the image suppose in the image UI and set the source property with this attribute:-
    IWDResource res=WDResourceFactory.createCachedResource(b,"MyImage",WDWebResourceType.JPG_IMAGE);
    IPrivateAppView.IVn_ImageTabElement imageEle=wdContext.createVn_ImageTabElement();
           imageEle .setVa_Name(res.toString());
    wdContext.nodeVn_ImageTab().addElement(imageEle);
    Hope this may help you.
    Deepak

  • Double clicking an image in Browser view

    I see that the behavior for double clicking an image in Browser view has changed between Aperture 2 & 3. In version 2, double clicking an image would jump from Browser view to zoom in on that image in full screen mode. Now in version 3, double clicking just switches to that image in Viewer mode in the main window, without entering into full screen mode.
    While I guess this change makes some sense given the changes to full screen mode in v.3, my old fingers have gotten used to doing things the old way. To recreate what I used to do in v.2 I need to double click, then hit 'F' to do to full screen mode and then do the reverse to get back where I started.
    Is there anyway I can change this behavior to the old v.2 way? I see lots of ways to customize hotkeys and commands, but nothing to change behaviors for a double click.
    Thanks!

    I can't find anything, but I'm still finding my way around!
    I don't think you need to double click and press F..... just pressing F should change views.
    Another way is to drag the "Full Screen" icon into the toolbar, and you can just click that.

  • How to view the image as cylindrical view in panorama image viewer?

    i am facing the problem to view the image as cylindrical view.
    i.e, the image moved at the end position ,the image seems to jump to the start.
    instead of this the image should view as cylindrical view. i.e, that the end of the image sticks to the beginning of the image.
    import java.awt.Dimension;
    import java.awt.Graphics;
    import java.awt.Graphics2D;
    import java.awt.MediaTracker;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.awt.image.BufferedImage;
    import java.io.File;
    import java.io.IOException;
    import javax.imageio.ImageIO;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.Timer;
    public class PanoramaImageDemo
         private BufferedImage biBackground = null;
         private JFrame f;
         PanoramaImageDemo()
              f = new JFrame("AniDemo 1.0");
              f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              loadBackground("C:/Documents and Settings/All Users/Documents/My Pictures/Sample Pictures/sunset.jpg");
              myPanel p = new myPanel(biBackground);
              f.add(p);
              f.pack();
              f.setVisible(true);
         private void loadBackground(String fn)
              File file = new File(fn);
              BufferedImage image = null;
              try
                   image = ImageIO.read(file);
              catch (IOException e1)
                   System.out.println("File Not Found");
              MediaTracker mt = new MediaTracker(f);
              mt.addImage(image, 0);
              try
                   mt.waitForID(0);
                   biBackground = new BufferedImage(image.getWidth(), image
                             .getHeight(), BufferedImage.TYPE_INT_RGB);
                   Graphics2D g2 = biBackground.createGraphics();
                   g2.drawImage(image, 0, 0, null);
                   g2.dispose();
              catch (InterruptedException e)
                   System.out.println(e.toString());
         public static void main(String[] args)
              new PanoramaImageDemo();
         class myPanel extends JPanel implements ActionListener
              private BufferedImage background;
              private BufferedImage bi = null;
              private int upperLeft = 0;
              int width;
              int height;
              myPanel(BufferedImage bg)
                   super();
                   background = bg;
                   width = background.getWidth() / 2;
                   height = background.getHeight();
                   bi = background.getSubimage(upperLeft, 0, width, height);
                   setPreferredSize(new Dimension(width, height));
                   Timer t = new Timer(5, this);
                   t.start();
              public void actionPerformed(ActionEvent e)
                   upperLeft += 1;
                   if (upperLeft >= width)
                        upperLeft = 38; // adjust to make rollover seemless
                   bi = background.getSubimage(upperLeft, 0, width, height);
                   repaint();
              public void paintComponent(Graphics g)
                   g.drawImage(bi, 0, 0, this);
    }plz help me regarding this concept

    I have learnt a technique when I am programming in flash.
    Assume you have a photo cat.jpg with 10 units in width and 10 units in height. You can have a view(viewport) 10 units in width and 10 units in height.
    The following shows the width of the photo:
    012345679
    To show an effect of panorama, you can draw 2 photo at any time. I assume the eyesight of a person move from left to right with 1 unit at a time.
    The original image is 0123456789.
    If the person move eyesight to right by one unit, the image become
    1234567890
    If the person move eyesight to right by one more unit, the image become
    2345678901
    You can program the by drawing 2 images at any time.
    0123456789(zero width for second image)
    123456789(0, 1 unit in width in second image)
    23456789(01, 2 unit in width in second image)
    To display part of image, try this link to a program to crop image
    http://www.java2s.com/Code/Java/2D-Graphics-GUI/Imagecrop.htm

  • I have blurry artwork in Album View thumbnails.  Deleting the cache makes all the artwork sharp, but once iTunes is restarted, the artwork goes back to being fuzzy unless i delete cache again.

    I have blurry artwork in Album View thumbnails, but not in Grid View/Cover Flow.  Deleting the cache and forcing it to rebuild makes all the artwork sharp, but once iTunes is restarted, the artwork goes back to being fuzzy unless i delete cache again.

    Responding to your request here.
    I can't say it's a problem I've noticed personally, though now you've made me look it does seem that the large thumbnail is slightly fuzzier than the same image in the artwork panel. I have the artwork panel as small as it goes (small screen) and it is still slightly larger than the image in the browser so that might be all there is to it.
    Here's an example from my screen.
    Perhaps iTunes is storing a thumbnail at say "medium" size which it then blows up to create the large image. Are you seeing a similar effect or is your "fuzzy" art much fuzzier? A screenshot would be helpful.
    tt2

  • Metadata ON image in browser view?

    i have been finding an issue in deleting duplicate images which i am doing manually and i am wondering if anyone can help with this. since these duplicates are the same /image/ but may not have the same name or the same resolution i do the following (i keep the one with the highest resolution)
    first i start in a browser view that lets me see all the images and then i do a manual sort to put the same images next to the same images. now the problem starts.
    in order to /see/ the metadata such as image size and file size i have to go into List view where i can see this information. then when i find the smaller of the two images i want to delete this one but since the image is so small in list view (and since i can't click to open it) i have to go back to browser view to see the image. then i go back to list view to delete it.
    since all the images look the same in list view (and since my images are not named the same) i sometimes use a black placeholder image which i move around and put between sets of duplicates while in browser view so that when i go back to list view i can make sure to see that the next two images are in fact the dupes of each other - to make sure i am not deleting a small image that is actually the only version of an image/file in my database. i mean, since i can't SEE this image in list view it is almost impossible for me to know which image it is in reality and deleting it without going back into browser view seems like an especially bad idea.
    is there a solution to this that might involve enlarging the THUMBNAILS IN LIST VIEW or being able to see image size and file size in BROWSER VIEW without it being too messy?
    TIA for any help.
    - jon

    i sometimes use a black placeholder image which i move around and put between sets of duplicates while in browser view so that when i go back to list view i can make sure to see that the next two images are in fact the dupes of each other - to make sure i am not deleting a small image that is actually the only version of an image/file in my database.
    One more suggestion, Jon. Have you considered to stack the duplicates in browser view? This way stacked images will be grouped in list view, and you can easily tell, which images belong to the same set of duplicates, for example: Three similar images stacked - you can disclose them by pressing the disclosur triangle and compare the file sizes. The stacked images will be indented in the list.
    Regards
    Léonie

  • Missing images in the viewer

    When I've imported my videos to FinalCut, I have a problem with showing the images in the viewer. The sound works perfectly and it seems like the picture is available in the time line.
    Does anybody have any suggestions what the problem might be?

    Thanks for the quick answer!

  • Moving images within Grid View in LR3beta2

    Frustrated. In LR3Beta1 I could manually move and place images within Grid View or from the slide view at bottom for purposes of sorting "similar subject" content within a specified Text/Attribute naming. All of this was accomplished from the Parent folder, with no need for drilling down the Tree.
    Now, since installing LR3Beta2 I can no longer manually move (sort) within Grid View...unless I am in the lower most folder of the tree. This change is not practical since a tree folder may not match the relevance of my specified Text/Attributes.
    Can anyone tell me what I may be doing wrong, or is the ability to manually sort from Parent folder no longer an option?

    Here's an example of how I catalog/label/sort my images...
    Architectural images project - 3 locations of shootng, 4 areas of focus: Doors, Windows, Facades, Walls
    So, I may have 20 images w/both a door and a facade in the shot, 20 images with a window and a door, etc. I prefer to Keyword all of the images as Architectural, and then Keyword those applicable to Doors, Windows, Facades, Walls, etc.
    Now, suppose those all go into a folder labeled Architecture.
    The next week I get an assignment for Urban settings. It may include shops, churches, etc. However, within those, I decide to Keyword (where appropriate) Doors, Windows, Churches, Shops, etc. That project goes into a folder labeled Urban Settings.
    Now, let's say I have a request specifically for "Doors". Now, those Doors are spread across multiple folders at this point so I have no opportunity to manually sort all of the doors my similar content if they fall into multiple folders. Doesn't matter that I have pulled up Doors through Text, I still cannot sort them by similar style, shape, color, etc since they are spread across multiple folders.
    In the 1st beta, I could slice and dice a hundred ways to arrive at a final view and then...sort those so that they always appeared that way whenever I called them up again. Didn't matter that they were in multiple folders. That was extremely useful and...sweet.
    Any ideas?

Maybe you are looking for