Have an iphone 3 and is asking to connect to Itunes

But when I connect nothing happens,just say that my sim card cannot be read.but I can receive phone calls,just cannot have acess to the phone at all,just to make emergency call.
Hoe can I restore or have access to my old phone?
All advices are welcome.
Best,

Check to the right in the MORE LIKE THIS box.  Your question has been asked and answered multiple times already.

Similar Messages

  • HT201210 I have a iphone 3 and it stuck on connect to itunes on the screen.  I connect it to my computer and itunes doesnt recognize my phone.  What do I do?

    I have a iphone 3 and its stuck on connect to itunes on the screen.  When I connect it, itunes says it cant recognize my phone.  What do I do??

    Check to the right in the MORE LIKE THIS box.  Your question has been asked and answered multiple times already.

  • Can I have an iphone 4s and itouch 4g on the same itunes account?

    can I have an iphone 4s and itouch 4g on the same itunes account?

    You can activate up to 10 devices with the same Apple ID.

  • TS1398 I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.

  • I have an iphone 4s, and i can not connect to any wirless router through wifi??

    i have an iphone 4s and i can not connect to any wirless router using wifi, the only way it to put it in the freezer for a few minutes and the i only get like 5 minutes of wifi time and the the connection drops again and the phone can not even recognize the network??
    any help??!!

    Seriously...and where did you get this tech tip? You do realize that all iPhone 4S's are still under warranty, although there's a very good chance your freezer trick has tripped a moisture sensor, thus voiding your warranty. Make an appointment at an Apple store, but be prepared for bad news. Good luck.

  • HT201263 I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes sc

    I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes screen on. It won't go away and I have tried restarting and turning off my phone various ways various times. I don't know what to do!

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note:
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT1414 i just had my replacement iphone 5, and now it wont connect to itunes to activate

    i just had my replacement iphone 5, and now it wont connect with itunes to activate

    The servers are getting slammed. Bunch of people trying to download iOS7 at the same time.
    There is a chance activation servers might be down/slow for now. Just keep trying throughout the day.

  • I have an iphone 4s and ive downloaded an album from itunes, why am i unable to use one of the songs as a ringtone, ive been told i have to download a "ringtone" but i already have the album

    can anyone tell me why if i have downloaded an album via itunes i am unable to use of the songs as a ringtone ? i have the iphone 4s

    Songs and ringtones are different types of music files. The file extension of Songs is  mp4 and that of ringtones is  mp4r.  They are not interchangeable.  You need to download the ringtone you want or convert the file with a ringtone creator app of which they are many for free in the App Store.

  • I have an iphone 5 and i when i connect to my computer, i cant see all my photographs

    I have an iphone 5 and when i plug it into my computer to see my pictures, only a handful is there.

    are you absolutely positive they were ringtones? check your music app to see if they are in there. If they are, you downloaded songs and not ring tones.

  • HT1212 if you cannot remember passcode you selected and get locked out of iphone 4 and it says to connect to itunes and it doesnt work what can you do to have use of your phone again?????

    Is there anyway you can enable iphone 4 afer being locked out by entering wrong passcode more than 5 times and it says to connect to itunes and still doesnt work???? so frustrating... apple cannot

    iOS: Forgotten passcode or device disabled after entering wrong passcode

  • ITunes not recognizing my iphone 4 and is stuck on connect to itunes screen.. Even apple store cannot fix it.. any help?

    I tried Erasing all contents and settings.
    And after that it asked to connect to itunes for restoring. BUt iTunes never recognized the iphone and i am stuck on this screen

    Ignore sandeep.  Don't use DFU mode.  You need to use recovery mode.
    http://support.apple.com/kb/HT1808
    Placing your device into recovery mode
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
    Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
    If necessary, open iTunes. You should see the following "recovery mode" alert:
    Use iTunes to restore the device.

  • I have just installed iOS7 and i can't connect to itunes store. Please help.

    i have just installed iOS7 and i can't connect to the itunes store. Please help.

    Hi P.Rose,
    If you're unable to connect to the iTunes Store, try these steps:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Cheers,
    - Ari

  • HT201210 My partner updated iphone 5, and it now shows 'Connect to iTunes'. Then we get 'iTunes could not contact iPhone software update server because you are not connected to the internet'. Please help.

    iPhone 5 was updated (version unknown), and now screen shows 'Connect to iTunes.  When we try to do this, we get message 'iTunes could not contact the iPhone software update server because you are not connected to the internet'. 
    Please tell me how I fix this problem.
    Thanks

    Yes, the reason you are getting the error is the phone cannot provide internet for the laptop and then update itself. It would lose connection as you erase the firmware and try to update. You need to connect the computer to the Internet in some other fashion before you connect the phone to try and fix the update problem. As Ocean20 says, and I completely agree, how would you think you could use the Internet connection of a device that is not only going to turn off and on, but is going to get completely wiped of firmware and restored? It would completely remove the device from the equation here. Does that make sense to you?

  • My ipad is locked and it asking to connect with itunes

    i have wrongly entered password in my i pad and now it is locked. it is asking to connect to i tunes. but i dont have that computer now.
    how can i enable it again

    You need a computer. Use a friends computer.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT4623 i up to date my i pad and it ask to connect to itunes but it give me massage with recovery mode

    i made up date my i pad and it dosen't open  it ask me for itunes and when i connect it says that my i pad in recovery mode what can i do?

    Is your iPad disabled?
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • Nokia 500 symbian belle w/ NFC support?

    i wonder if i upgrade to symbian belle on my nokia 500, will it able to add NFC support? TY Nokia user since 2004. Owned 3310, 1100, 3300, 6600, 6300, 5310, 5130, N79, 5800. Owns: 6230 (still alive) and 500.... Solved! Go to Solution.

  • LIS Reports for Purchasing

    How to Activate LIS for Reports ? What are the important LIS reports for purchasing. Thanks Sweth

  • Best way to archive RAW Images and keep JPG?

    Hello everyone, I have what I believe to be a fairly simple question.  My iPhoto library, comprised mainly of RAW images, is taking up a majority of my MacBook's 500GB storage capacity, and I want to fix this. I want to keep all the photos in my libr

  • Newbie flex issue w/ addChild

    Why am I getting an error for addChild()? "1180: Call to a possibly undefined method addChild." I"m completely lost, because I never had an addChild problem in Flash... Only inside of a Flex Component. package comps import flash.display.*; import mx.

  • Problems in installation of J2EE server.

    Hey guys, We tried installing the J2EE server. I set the local host details in Windows> Preferences in NWDS, but the server is not getting activated to test our applications. To start the server, I had gone to control panel>Administrative tools-->Ser