Have anyone installed 1159 on linux AS3.0

Hi All
Have anyone ever experimented to install oracle 1159 on linux RedHat 3.0 successfully?
Regards

Thanks Chandra & others in this forum.
I did install the 11.5.9 on RHEL 3.0
after a struggle of 12 hours.
I solved the issues, applied patches.
It works very well.
Here is another version of solution.
The steps to create the issue,
especially unable to instantiate & unable to create control file.
I found some workaround too.
When I tried to install 11.5.9 on Redhat Linux Ent. 30 & AS 21 & RH9,
I find that read from config file does not work properly,
that creates "unable to instantiate file"
and "unable to create control file" issues.
Steps to recreate the issue.
start rapidwiz
When giving applusr and oracle user,
the default brings applEVAL, oraEVAL
supposing your instance is EVAL (oracle_sid)
change it to applmgr and oracle
save the config file
exit it ( do not run further )
Next start the rapidwiz
say read from config file
It reads the /tmp/config.txt and backs-up to /tmp/config.txt.bac
everything looks fine, but you will get
"unable to instantiate file" and "unable to create control file" errors
The reason is oracle changes some of the entries in
/tmp/config.txt while reading it.
half way through (you can find out at the end of the file)
it changes applmgr into applEVAL and oracle into oraEVAL
Hence, the user does not exists and unable to instantiate files.
The work around is do not read from config file
start from scratch, that is the oracle way!
They are way behind Microsoft, no doubt.
I just followed step by step instructions
in this release notes for RHEL 3.0
Oracle® Applications
Installation Update Notes
Release 11i for Linux x86 (11.5.9)
Part No. B10849-02
December 2003
Good Luck.
Jiltin

Similar Messages

  • Have anyone installed 1158 on linux AS3.0

    Have anyone installed 1158 on linux AS3.0

    when applied the i386-glibc-2.1-linux the logfile have some error message like :
    chmod: failed to get attributes of `/u02/oracle/proddb/8.1.7/bin/extproc': No such file or directory
    chmod: failed to get attributes of `/u02/oracle/proddb/8.1.7/bin/agtctl': No such file or directory
    chmod: failed to get attributes of `/u02/oracle/proddb/8.1.7/bin/hsalloci': No such file or directory
    chmod: failed to get attributes of `/u02/oracle/proddb/8.1.7/bin/hsots': No such file or directory
    chmod: failed to get attributes of `/u02/oracle/proddb/8.1.7/bin/hsdepxa': No such file or directory
    chmod: failed to get attributes of `/u02/oracle/proddb/8.1.7/bin/tnslsnr': No such file or directory
    chmod: failed to get attributes of `/u02/oracle/proddb/8.1.7/bin/lsnrctl': No such file or directory
    /bin/chmod: failed to get attributes of `ctxhxx': No such file or directory
    chmod: failed to get attributes of `/u02/oracle/proddb/8.1.7/ctx/bin/ctxhx': No such file or directory

  • Have anyone upgraded Red Hat Linux AS from 4.4 to 4.6 of EBS11510.2(CU2)?

    Hi,
    Have anyone upgraded Red Hat Linux AS from 4.4 to 4.6 of EBS11510.2(CU2)?
    Please advice any issue/concerned etc?
    Thanks,

    You need to relink all binaries after an OS Upgrade to ensure that everything is working as expected.
    - Take a backup of the application/database
    - Upgrade the OS
    - Relink all binaries
    - Start up the application/database
    - Take another backup once you confirm that everything works properly
    Note: 356878.1 - How to relink the whole Applications 11i Installation
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=356878.1
    Note: 131321.1 - How to Relink Oracle Database Software on UNIX
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=131321.1
    Note: 407055.1 - Process To Upgrade the Operating System and Oracle Database Server
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=407055.1

  • Oracle 9i (9.2.0.4) install on Redhat linux AS3.0

    I download the oracle 9i (9.2.0.4)latest version from website , I only require patch p3006854_9204_linux.zip for the installation. But Unfortunitly, after finish database setup, It can not start Agent Configuration Assistant
    error message:
    "Agent service Failed"
    Any one can give me suggestion to solve it ?
    Thanks a lot!
    [email protected]

    Did you set your oracle home? Can you post your ENV parameters?

  • Has anyone installed 9i on RH AS3?

    It seems that certain rpm's are required, which I am unable to locate.
    They are:
    compat-db-4.0.14.5
    compat-gcc-7.3-2.96.122
    compat-gcc-c++-7.3-2.96.122
    compat-libstdc++-7.3-2.96.122
    compat-libstdc++-devel-7.3-2.96.122
    TIA,
    James

    check out Werner's guide
    http://www.puschitz.com/InstallingOracle9i.shtml

  • How to install PEAR on Linux server

    Hi
    I have PHP installed on one linux server and developers are using it already. I have been given the task to get the oci8 (oracle connectivity) done on this same server. I can not do the reinstall of whole PHP again. During the install of OCI extention I got many errors for missing PEAR files.
    So I went through the PEAR document and found "php go-pear.php" command to install the PEAR package. This command fails with below error.
    download of http://pear.php.net/get/PEAR?uncompress=yes failed: Failed to parse address "" (0)
    The problem is this Linux box does not have direct internet connectivity so I had to download all the required packages as per go-pear.php on my local machine and I am FTPing them to this linux box. I have kept the "PEAR-1.8.1.tar" file in the same directory where go-pear.php file exists but still the above command tries to download it from internet.
    Could you please tell me how can I overcome this problem. Please let me know if there are any RPM's that I can use to install PEAR rather that "php go-pear.php" command.
    Thanks
    Shelly

    Hi CJ.
    It has been more than 4 weeks that I am strugling to get PHP-Oracle work on my system. You are the only hope right now. I have gone through so many articles and white pages that I am totally confused and starting to hate PHP or actually Suse Linux. :-)
    Below are the details of my system.
    more SuSE-release
    SUSE LINUX Enterprise Server 9 (i586)
    VERSION = 9
    PATCHLEVEL = 4
    rpm -qa php* No results
    rpm -qa ph* --No results
    rpm -qa oracle*
    oracle-instantclient-devel-10.2.0.4-1
    oracle-instantclient-basic-10.2.0.4-1
    * which php*
    */usr/bin/php*
    * php -version*
    PHP 4.3.4 (cli) (built: Jan 17 2008 09:55:23)
    Copyright (c) 1997-2003 The PHP Group
    Zend Engine v1.3.0, Copyright (c) 1998-2003 Zend Technologies
    This is what I see on my system
    */usr/bin> ls -l |grep php*
    -rwxr-xr-x 1 root root 100308 2008-01-17 05:03 asp2php
    -rwxr-xr-x 1 root root 1392441 2008-01-17 04:55 php
    -rwxr-xr-x 1 root root 684 2008-01-17 04:55 php-config
    -rwxr-xr-x 1 root root 593 2008-01-17 04:55 phpextdist
    -rwxr-xr-x 1 root root 2082 2008-01-17 04:55 phpize
    /usr/bin> whereis php
    php: /usr/bin/php /etc/php.ini /usr/lib/php /usr/include/php /usr/share/php /usr/share/man/man1/php.1.gzI see that PHP is already installed on my system which is version PHP 4.3.4.
    Question.
    1) Do i have to upgrade the PHP version to the latest to get OCI8 configured?
    2) If the answer to the above question is Yes than could you point me to any reference doc?
    3) If the upgrade is not needed, how can I configure PHP to use OCI8 to connect to database?
    Thanks in advance
    Shelly

  • Installing delivers in linux machine

    Hi
    I have to install delivers in linux machine.is any document on these
    Regards
    mervin

    Hi,
    I think you need to do the same configuration as that of windows.Only thing is you need to configure an email server on your linux box.There are so many blogs for this.Please see one of them below
    http://debaatobiee.wordpress.com/category/obiee/bi-delivers-and-schedulers/
    Regards,
    Sandeep

  • Seek help for install java under linux

    I have successfully installed java on linux , but not able to use many features tht i possibly could , such as jdbc , prblms on Mysql. most buggin prblm how do i set the compiler path to compile files from my home directory. i have to forcefully use the bin directory and run the complier given long address for the files. plz help.
    abhi

    abhi
    I don't know about your MySQL problems based on what you have posted - can you post any more specific information? Have you got the relevant MySQL drivers in your classpath? The drivers are available here:
    http://www.mysql.com/downloads/download.php?file=Downloads/Connector-J/mysql-connector-java-2.0.14.tar.gz
    the README in that file will give you installation instructions.
    how do i set the compiler path to compile files from my home directorySet the CLASSPATH environment variable to include whichever directories you like, eg (on bash) type:
    export CLASSPATH=$CLASSPATH:.:<your java dirs>To make java easier to run, put the directory in which it is installed into your path:
    export JAVA_HOME=<where you installed java>Then do
    export PATH=$PATH:$JAVA_HOME/binverify it has worked by simply typing
    javaYou can put all of these commands into the .*rc file for your shell, so that they are executed every time you open the shell. So if you are using bash you can put them into ~/.bashrc
    Read up setting the PATH and CLASSPATH for more info.
    HTH
    Matt

  • I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??

    I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??

    Yes, it's possible, but if your Windows system is on a Boot Camp partition then you have to first remove it. Then create however many partitions you want for the operating systems. You have OS X on one, so you need two more - one for Windows and one for Linux. You then install Windows and Linux separately to their respective partitions. Download rEFIt
    Use it as the replacement bootloader so you can properly boot from each OS properly.

  • I used to send photos from my Lumix Tz-40 camera directly to my iPad using the cameras WIFI. Since I installed IOS7 the connection no longer works. Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

    I used to send photos from my Lumix Tz-40 camera directly to my iPad using the camera's WIFI. It was all working well until I installed IOS7.  The connection no longer works. The camera still keeps the iPad in its connection history. The camera's wifi network still appears when I select a WiFi network from the iPad but the Wifi status icon never appears on the iPad. So the connection is never made.
    Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4).  When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils".  Anyone know wha

    I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4).  When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils".  Anyone know what the problem is and how to fix? Thanks.

    https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

  • I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

    I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

    And I cant work out why all of my pictures are not diplaying in iphoto?
    Is this iPhoto on your Mac?  Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11?  If so then apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
    Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
    OT

  • I recently installed vista to my mac (32bit)...my headphones are not working. I can't find the 3.5mm jack that apple suggests using. I have tried installing/unistalling several different audio drivers. Does anyone know how to solve this problem?

    I recently installed vista to my mac (32bit). My headphones are not working on it. I could not find the "3.5mm jack" that apple suggests to "solve" this issue. And I have tried installing/uninstalling audio drivers. Can anyone help?

    you don't need several drivers, you just need the audio driver for your Mac, which you didn't list, but would be Cirrus or RealTek.
    Along with uninstalling programs, go to Dev Manager and uninstall driver, or even rollback driver.
    some people have trouble installing or finding driver that will install.

  • Does anyone know how to install qmail on linux platform

    Does anyone know how to install qmail on linux platform and the site name where we can download the rpm of qmail.

    Yeah i know that this is java forum but i'm doing a
    project on j2ee which needs qmail to be installed.And
    i thought that even java people who are working on
    qmail may know that.Yes, but you should still post that question in another forum. I bet that most software developers knows how to boil eggs, but should I ask about that here?
    Kaj

  • What privileges user should have to install and run weblogic on linux box

    What privileges user should have to install and run weblogic on linux box ?

    Hello.
    Normal user if you don't want to listen to ip port < 1024 or write in protected directories (like /var).
    Regards.

Maybe you are looking for

  • Fork in process chain using ABAP program

    Hello everyone. I need a fork in my chain. Depending on the values in some db table I will make a decision: do some process or skip and go further. The only solution I can see is using ABAP program. But unfortunately It doesn't return status. Any sug

  • .mpg won't display in ITunes...

    I have an IPOD (30GB) and when I attempt to import .mpg files into ITunes so that I can put them in my IPOD, the ITunes software goes thru accepts them as vaild videos to import, it also begins processing them so that they will be in my ITunes video

  • SUS - Hide / Disable column table

    Hi Experts, I need to hide or disable two columns within the edit order screen in SUS. When you display a purchase order in SUS and then click on process button two buttons are displayed in the item details table for accept or reject PO positions. I

  • How to manage Forefront Endpoint Prorection Security Client 2010 with SCCM 2012

    Hi I've sucessfully installed System Center Configuration Manager 2012 and now I 'd like to push/deploy Forefront Endpoint Protection Client 2010 on client machines.I also know that Microsoft embedded Forefront Endpoint Protection in SCCM 2012 so tha

  • Flip HD Mino and Final Cut Pro HD 4.5  - HELP

    Problem is that it's taking me hours to edit video from a Flip HD Mino Equipment using: Starting with the newest FLIP HD mino cam then bringing in to a G4 POWER MAC desktop running TIGER OSX . Once I import the files on my computer they are MPEG 4's