Have Apple 5... Suddenly photos are coming out too dark and poor color....any ideas as to problem

Camera taking poor pictures....too dark, flash goes off but picture quality poor. Just started this recently

Did you alrready try the general troubleshooting?
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
copied from Troubleshooting iPhone hardware

Similar Messages

How do print from photoshop CS3 to my new epson XP520 printer? The photos are now far too dark: never had this problem with any other printers?

Help please. I have a new Epson XP 520 printer and do not know how to set the CS3 print to get good results as my printed photos are now far too dark. Never had any problems with previous printers and despite changing settings have been unable to resolve.

System info? Exact print settings? Color management?
Mylenium

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

HT3180 struggling to wake my apple tv wont respond even when holding the menu and down button any ideas ?

struggling to wake my apple tv wont respond even when holding the menu and down button any ideas ?

Did you try unplugging the unit from power, leaving it for ten minutes, then plugging in again?
If you have & it didn't work, Damian Smith1 posted this possible solution (I like to give credit where credit is due).
Connect your ATV to your computer and try restoring it to factory setting Use the link below to walk you through the process
Apple TV (2nd generation): Restoring your Apple TV
support.apple.com/kb/HT4367

Trying to install Brother MFC-j475dw printer on older macbook (running osx 10.5.8) and need an inbox driver as Brother drivers are only for 10.6 and newer. Any ideas?

Trying to install Brother MFC-j475dw printer on older macbook (running osx 10.5.8) and need an inbox driver as Brother drivers are only for 10.6 and newer. Any ideas?

Yes, I have the tethering plan. I was connected with USB and Bluetooth when I had the 3G.
I am can now connect with USB, I recieved a new not seen before window when I plugged in the phone with the Network window open that allowed me to click on apply an connect.

HT201269 My wife switched from an iPhone 4 to an iPhone 5. Everything transferred over and service is on the new phone. However, texts are going to her old phone still. Any idea what the problem is?

My wife switched from an iPhone 4 to an iPhone 5. Everything transferred over and service is on the new phone. However, texts are going to her old phone still. Any idea what the problem is?

As long as iMessage is enabled and the old phone is connected to a WiFi access point, it will continue to receive iMessage texts. It won't receive non-iMessage texts nor will it receive any calls.

After an hp update today i have lost all sound. everything appears to be turned on and up? any ideas

After an hp update today i have lost all sound. everything appears to be turned on and up? Any ideas?

Never mind!!! After reading someone elses similar problem I applied their repliers advice and it works! Thanks.

HP Photosmart Premium all-in-one C410a. The photos are coming out dark, what is happening?

The photos are dark. I am sending the photos wireless from my Toshiba Netbook NB205-N325BL with Window 7 Starter to my HP Photosmart Premium all-in-one C410a. The photos are dark when i send the photo from my iPhone 3Gs too. I have changed out the ink cartridges to see if that was the problem since the ink cartridges were low.
I have recently purchase this printer. I recently had a Photosmart All-in-one C7280 and was very happy with it until it stopped working with Win 7.
Your help is appreciated.
thank you,
Paula

Laura,
There are quite a few trouble shooting steps in my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0]. But to cut to the chase, first make sure you can run one of the Apps on the Printer and its getting content. Then make sure the firmware is the latest (Tools->Web->Automatic Updates->Check for Product Updates). Then power cycle everything (Router, Printer, iOS device). If it's still not working, more likely then not its a problem with your wireless router and Bonjour, so post back what brand of router you have, the model, and how your network is configured.
Just trying to help.
Andrew

I have iTunes 10.5 and a 4g iPod touch. WHen I upgraded to 5.01, my photos are not all in the correct folders. Any ideas?

When I load my photos on my 4g ipod touch with iOS 5.01, the photos are there but not all in the correct folders. How can I correct that?

I spent last week looking for a solution to that little yellow "!" needle haystack....
It is probably buried where nothing can touch or change it other than what I resorted to and would have saved time, clean install after I made sure to have two backup sets: Windows Easy Transfer plus Paragon clone OS and partitions to drive. Had to spend a full day reinstalling, updates, etc. Careful not to bring back any prefs or data that might be corrupt or wrong.
10.5 and iOS 5 on new iPod 4G works much better though and as they should and no issues like I had with AMS or other services or needing to restart first before launching iTunes.

Prints coming out too dark: need calibration workflow?

Hello!
Yes, my monitor is an LCD and it is bright. It is not a proofing monitor. It was calibrated. I've been printing B&W from LR on an Epson printer (r1900 & r2400). I know proper color management. Turn off Epson Color Management, let LR manage color with the correct icc profile
Obviously I can do trial and error, brightening the photo until it looks correct.
My thought is, is there a way I could print on one page Thumbnails or like in the film days strips with different "exposures." Then with one print I could pick how much of an adjustment is needed?
Any thoughts how this can be accomplished?
Any plug-ins?
Thanks
Max

It was automated. So I don't know what tweaks it did. My colors are accurate.
It's been awhile. You run the software and it generates the icc profile. I see it load on each start-up. It was the version before Color Monkey. I don't have a highend monitor.
Just checked: X-rite Dtp94 Monaco Optix Xr Monitor Display Calibration

HT3964 Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

read this and see if it helps: http://support.apple.com/kb/ht2090

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size.
I don't understand why this is happening.

Quick follow up, since I was on my phone earlier and am back to a real keyboard.
To access Easy Setup, hit Control Q.
If you click on the blue discosure triangles, a dropdown menu with about a dozen different presets will be displayed. Select the one you want, (Here, I've selected 720P.)
Whatever you select for a preset will not be applied until you make a new sequence. (I don't like to have sequences with different properties in the same project so I prefer to make a new project if I change the Easy Setup.)
Because photo aspect ratios are different than video, I typically put a solid generator of some compatible color on the first track (v1) and put my photos on the track above (v2). Looks better, IMO, than black bars. There are other creative ways to display them. And of course, you could scale them up to fill the frame…but then you probably would have to re-position them.
Good luck.
Russ

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

I have a Macbook Pro Apple . My photos are in iPhoto files. How do transfer the file I want to work on onto Photoshop?

I have a Macbook Pro Apple . My photos are in iPhoto files. How do transfer the file I want to work on onto Photoshop?

Where iPhoto Pictures are Located and How to Access the iPhoto Library and Picture Files

HT201250 How do I restore photos from Time Machine? All of my photos have been imported within iPhoto and therefore are exported to Time Machine via an iPhoto file. I can't figure out how to break individual photo files out of the iPhoto file. Any idea

How do I restore photos from Time Machine? All of my photos have been imported within iPhoto and therefore are exported to Time Machine via an iPhoto file. I can't figure out how to break individual photo files out of the iPhoto file. Any ideas?

You might post this query on the iPhoto forum and perhaps someone there can provide an answer.
I tried this on my MBP and it seems that you have to restore the entire iPhoto Library. What I did was put the current library in a separate folder on the desktop and then I restored the library from a prior date. If you were to do that, you then could extract the desired photos and then delete the restored library. Then place the current library back to the original location and import the desired photos.
Not tidy but it seems it will work.
Ciao.

Have Apple 5... Suddenly photos are coming out too dark and poor color....any ideas as to problem

Similar Messages

Maybe you are looking for