Have been lost, all the properties files in the CM repository (FSDB mode)

Hi,
I encountered the following problem: lost all descriptions to folders and files in the CM repository, which is connected to the FSDB mode. This happened as follows. At desired time connection to the server where the repository was broken, after some time the link was restored, but the repository was not available. After this portal has been restarted, and the repository to work, but lost all completed file properties, including the description.
How do I return all the description files?

Hi Stanislav,
Has this issue been resolved?
If not then the only way to restore this lost metadata would be a be restore, see sap notes 900571 and 737877 for more details.
Regards,
Lorcan.

Similar Messages

  • Have been lost all photos in tim installation iOS4

    Help me, please!!!
    I have IPhone 3G with software 3.0.
    I downloaded iOS 4 04 July 2010. And after reboot (installation) all photos in Camera Roll and Albums have been lost (are erased)!!! Why it happens? How can I return all my Photos???

    I, too, lost many, many (~300) photos off of the Camera Roll when I upgraded to 4.0. None of the photos from the "folders" that I sync from my laptop were lost so this seems to be a problem with the Camera Roll only. Help!

  • Failed Archive and Install - Have I lost all my user files?

    In another thread I have reported printing problems while running OS 10.4.11 on a Cube http://discussions.apple.com/thread.jspa?threadID=1401894&tstart=0. Tonight I decided to do an Archive and Install to try to fix the problems. I got a message saying that the installation had failed and that I should try to reinstall. When I did so I was given the option to Archive and Install but the check box for Save Users and Network Settings could not be checked. Rather than trying to reinstall I quit the installer and specified an OS 9 system folder for booting. After booting into OS 9 I examined the Users folder and found no folders corresponding to my two user accounts, only a shared folder. The OS X Applications folder appears to contain all my applications.
    It seems that the failed installation erased my user accounts. Is that correct? If so, how can I recover them?
    Of course I did a backup of my user files before installing, right? NO!!!! My last backup was eight days ago.
    John Link

    Yes, an Archive and Install will not erase the disk or your files. If you use the option to preserve user accounts and preferences those will be transferred into the newly created system. However, your existing system is a failed installation so if you do another Archive and Install it cannot transfer your user account because it is not in the existing system. Plus you will need sufficient free space on the hard drive for yet another system - about 6-8 GBs.
    Once you backup your personal data and your Home folder, I would suggest you just erase the hard drive, reinstall OS X from scratch, then copy your Home folder backup to the newly installed system. These articles, How to get files from a previous home directory after Archive and Install and Mac OS X- How to recover a home folder (directory), explain the process. Although written for an Archive and Install scenario it is essentially the same procedure you would have to follow.
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.

  • ITunes lost all of my files on the external drive, thousands of songs.  Is there a way to load them back in without doing one at a time?

    I've just updated the lates iTunes, and now it seems to have lost all of my music.  I have thousands of songs on an external drive, none of them can be found...the songs are in multiple folders on the external drive so the media folder to the external folder doesn't fix the problem...iTunes isn't seeing songs that are in different folders with sub folders.  Is there a way to have iTunes discover the music on the external drive to avoid reloading each of them one at a time?

    When you first download iTunes onto a PC, it will give you the option to allow iTunes to search for your music. I'd suggest removing iTunes from your PC, connecting your external drive and then download iTunes from scratch. I'm pretty sure if you let it, it will find the music for you.

  • Tried to update to IOS6 and now my ipad is trying to restore -- getting error "activation server not available" help!  Have I lost all my video files?

    I was trying to do a simple udate of the ios software.  I connected to ITunes and the Ipad screen popped up saying there was an update available.  I clicked on the update and it started updating and also there was a message saying it was backing up.  But then I got a message to click here to complete the update -- with a restore.  I did that and now my IPad is n ot woking at all -- I get the initial startup screen and a message that says "your ipad cannot be activated because the activation server is not available"  I've tried connecting to itunes and get the same message -- server not available.  The devices menu option is grayed out so I cant sync, backup,, restore nothing.... HELP! please!  I only wanted to do a simple update -- now I think I've lost all my pictures and video files -- is there a way to get them back??

    Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have accidentally moved all of my files from the finder and want to get them back

    Hi, I tried to drag and drop all my files from the finder to my desktop but now i can't find any of them, please help

    Which files or file types are you referring to? What action did you perform exactly?

  • When I click a link to a pdf file, I'm only presented with a save box,not a choice to just view the file. I have been able to view linked files in the past, but not anymore. I have to save the file to downloads then go to downloads and open it.

    when selecting a link to a pdf file , I'm only given the choice to save it ..not view it ? How do I change that ..?

    That depends on how the server sends the file.
    If this is a MIME (content) type that is supported by other software then you can open the file automatically.
    If the file is send with a generic content type like application/octet-stream or as Content-Disposition:attachment then you can only save the file.
    *https://addons.mozilla.org/firefox/addon/force-content-type/
    *https://addons.mozilla.org/firefox/addon/inlinedisposition-reloaded/

  • I've lost all my help files

    Hi,
    the other day when I started up LabVIEW I got an error saying it had to install a runtime engine, no idea why this happened but I fixed it by reinstalling my drivers.  Anyway since I did that I've lost all my help files.  The context help works fine, but when I click "VI, function and how-to help", or "Click here for more help" in the context help window, nothing happens.  It doesn't even open up a window any more. 
    Any ideas what the problem could be?  I'm not sure which disk the files are on so I'm not sure how to reinstall them.
    I'm running LabVIEW 7.1 Full Development System on Windows 2000.
    Thanks,
    Nick

    Hi Nick,
    Sorry to hear about you losing the help files, which drivers did you re-install when you had the initial problem?
    The help files are located in C:\Program Files\National Instruments\LabVIEW 7.1\help, you could check whether files in this folder have been deleted or your access has somehow been restricted to this folder. If there are a set of compiled HTML files there, try opening those individually and see if they open OK.
    Can you open Help from the LabVIEW Help menu (Help>>Contents) or pressing F1?
    I would try repairing LabVIEW from the Add/Remove programs section of the Control Panel first, and see if this helps.
    Please let me know how you get on!
    Mark
    National Instruments UK & Ireland

  • "There has been a network or file permission error. The network connection may have been lost

    Hi,
    While trying to save an Excel or (less frequently) Word document, employees at my company have been seeing the error, "There has been a network or
    file permission error. The network connection may have been lost."  This is more common when they are connected through the VPN, but it also occurs locally.
    The employees all have Win 7 Pro laptops and the file server is Win Server 2008 R2.  I have found suggestions that a Windows update is the cause, but the articles on that all limit it to Server 2003.  Others have suggested setting the program to
    save a local copy of remote files; however, while the setting exists in Word, it does not exist in Excel.
    If anybody has any advice, it would be greatly appreciated.
    Thank you

    This is a known issue, might try the workaround is a better chooses .
    http://support.microsoft.com/kb/291156
    KR

  • My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

    My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

    Since you have purchased a new Mac (which, BTW, is not typed in all capitals) why not buy a Time Capsule <http://www.apple.com/airport-time-capsule/> which is designed specifically to work with OS X and Time Machine?
    You don't say what part of your Sony "crashed." If it was not the HDD it is possible to take the computer apart, put the HDD in an external case, then recover the data off of it (including the music) simply drag-n-drop. If it was the HDD that "crashed" that makes it more difficult.
    If you are able to recover the music from the Sony you can then add it to the iTunes library on the Mac and iTunes Match will then scan, match and upload the tracks to be mirrored in the cloud.

  • I downloaded music to my iphone and when I went to go sync it up to itunes, I lost all of the songs purchased from that time until the previous time I backed it up. How do I recover these purchased songs that have been lost?

    I downloaded music to my iphone and when I went to go sync it up to itunes, I lost all of the songs purchased from that time until the previous time I backed it up. How do I recover these purchased songs that have been lost?

    All of your music should be in itunes on your computer.
    Select it to sync and sync.

  • I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

    My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

    The dark bar is caused by the option "Show metadata below image".
    Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
    Regards
    Léonie

  • In 10.8, the file info window's "Kind:" read "Application"/etc. for 64-bit items and "Application (32-bit)"/etc. for 32-bit items. The "(32-bit)" part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?

    In 10.8, the file info window’s “Kind:” read “Application”/etc. for 64-bit items and “Application (32-bit)”/etc. for 32-bit items.
    The “(32-bit)” part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?

    1. Launch System Information into its 'report' mode. (A quick way to do this is by holding down the option key while clicking on the Apple menu item, which causes "About this Mac" to change to that.)
    2. From the list on the left, under "Software" click on "Applications." (If you don't see the Applications item, click on "Show more information" from the "File" menu.)
    3. Wait a minute or so for the report to finish.
    4. The last column in the report is "64-bit (Intel)." (You may need to scroll the window to the right to see it.) Click on that heading to sort the list alphabetically. Anything with a "no" is 32 bit.

  • "the importer reported a generic error" on a psd file i have been using all day.

    have been editing all day on a 3 minute video for a client, then all of a sudden, a PSD file with several layers for my graphics went off line... nothing else.. just the psd file.
    tried to ReLink but all I get is this
    "the importer reported a generic error"
    I have tried resaving the project as something else and still it wont relink.

    Resave psd file in Photoshop to another name and re-import.
    Replace the psd on the timeline.
    See if that will work.

Maybe you are looking for

  • Search box in a list

    Hello, It might sound silly but I have a problem. By default the SharePoint adds a search box next to the views, in order to be able to search documents within the current list. In the beginning it was working but some reason, I don't know why, it st

  • Where are the contents of GPnP profile stored?

    On my 3 node RAC setup using SCAN with GNS, I renamed GPnP profile on one node , stoppped clusterware on that node and tried to restart it. The c/w started and GPnP profile file was automatically recreated with name pending.xml. The moment I changed

  • IBook PDF files

    Can't find my PDF files stored in iBooks after restoring my iPad 3

  • Using firestarter, dhcp..very slow

    help, I have one internet connection that I am wanted to share with a second computer. I am now using firestarter to do this. The second computer connects via dhcp, and it almost works, only, the connection is very slow; it can connect to google, for

  • Every time i open a pdf, now, it, after a few seconds says that adobe reader has closed.

    Why does adobe close after a few seconds when i open a pdf?  It has worked fine for a year on this computer.