Have few questions to ask regarding clusters

          1. In Weblogic server, how many servers can we scale to?(upper and lower limits,limitations)
          2.How do you provide load balancing across database connections and allow RDBMS
          load balancing for read only access?

1. In Weblogic server, how many servers can we scale to?(upper and lower          limits,limitations)
          Depends on the app. Some will scale easily to 30 or 40 servers. Some won't
          scale to 2.
          > 2.How do you provide load balancing across database connections and allow
          RDBMS
          > load balancing for read only access?
          Depends. We use a driver that sends different users to different databases
          for some applications. Also we provide Coherence (http://www.tangosol.com/)
          to cache in the app tier with clustered apps.
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          Clustering Weblogic? You're either using Coherence, or you should be!
          Download a Tangosol Coherence eval today at http://www.tangosol.com/
          "Amol" <[email protected]> wrote in message
          news:3c6cd4d8$[email protected]..
          > ...

Similar Messages

I have few questions to ask about the Expert Series and Valet Series

Hello.
I have few questions to ask about the Expert Series and Valet Series.
1. I see there aren't any print server/bridge/access point for these two new series. Do I have to use previous ones? Or the new ones are in planned in near future?
2. Do I "HAVE TO USE CONNECT SOFTWARE"? Can I just use web interface to do every setting that these routers features?
3. Does expert series routers support guest network and parental control?
4. When I look into informations of these router, some router doesn't give information about backward compatible to older standards. Do I have to consider that as they are backward compatible with older standards?
Ok, that's all for now.
If I need to ask more questions I will do that in this thread as reply

With the New Expert or the Valet Series Router, you still can use the Print Server / Bridge and Access Points.
Well with the Expert and Valet Series router, you have an option to User Cisco Connect Software or you can User Web Interface of the Router. But with the Cisco Connect Software you have an Advantage of creating a Guest Account and using Parental Control , which is not available using the Web Interface.
These both the routers are backward compatible and they can connect to your G Series Product.

Have a question to ask ... I bought, at the time, the update of Adobe Audition CS6, being already in possession of the CS5.5 version. Since I had to redo the operating system (windows 7 professional 64-bit), reistallando program CS6, with the correspondi

have a question to ask ... I bought, at the time, the update of Adobe Audition CS6, being already in possession of the CS5.5 version. Since I had to redo the operating system (windows 7 professional 64-bit), reistallando program CS6, with the corresponding serial number in my possession, I noticed a malfunction that is:
importing a musical motif and starting the program, clicking on play, I do not play any pattern or song despite being in operation.
I reinstalled the program, but without any result. What do I do? Thanks.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Implminting ZFH have few questions.

I have few questions about ZFH setup.
Does the proxy server need to be out side the firewall? Or can it go
in the
DMZ zone? Does it have to be a windows box or can it be a Lunix box?

You can have the proxy either inside or outside your firewall. Where
you place it I suppose, depends on where the majority of your handhelds
will be connecting from (I'm assuming at least some will be connecting from
the internet via IP?)
If the proxy is outside the firewall, you would have to open port
2398, which is the default port for communication between the server and
proxy. If the Proxy is inside the firewall, you would have to open port 2400,
which is the default port for communication between the handheld IP
client and the proxy. Both of these port settings are configurable
The proxy must run on a Windows machine.
Hope this helps,
Dave Kegel
Novell, Inc
>>> Joe<[email protected]> 10/8/03 8:40:43 AM >>>
I have few questions about ZFH setup.
Does the proxy server need to be out side the firewall? Or can it go
in the
DMZ zone? Does it have to be a windows box or can it be a Lunix box?

Interview questions to ask regarding companies network

I had a quick phone interview the other day for a network engineering position and was asked to have another interview. They asked me to have questions for next time regarding their network?
Any good questions that I should be asking regarding their network?

Depending upon the type of position, I would tend to ask questions regarding Design and Support. Always ask the questions in a manner that allows YOU to follow up and highlight how your skills would be beneficial to the company - don't just aks questions and listen to the response, use the answer as an opportunity.
Design:
Routing protocols used?
Firewalls used?
Switches/routers used?
Level of redundancy?
Type of Service? i.e. MPLS, VPN, etc.
and many, many more
Support:
Is the network fully documented via diagrams?
Are procedures documented?
Expectations of support for the environment?
Change procedures?
and many, many more
However, equally important is the stability of the company & department you would be working for:
How long has the person been the Manager for the team?
Why is there an opening? i.e Did someone leave or is the company expanding?
Always ask for a tour of the facilities where you would be working
Try to meet some of the staff before starting
The key is the company is looking for someone that will suit THEM. You, in turn, should be looking for a company where you would feel comfortable and fit in with the team. Most people know within the first 5 minutes of meeting someone whether or not there is any interest - that's why first impressions are so important.
Good luck,
Steve

Hi sap gurus I have few questions

1. Which table do we store the characteristics in sap bw extended star schema
2. how does dimension-sid tables and sid-master data tables joined
with wht keys (sid id,dim id or characteristics)
3. Is it possible to have characteristics have no masterdata
4. what is dimension attribute and describied attribute in star schema
Thnks
manan

Hi,
In order understand these questions u should be clear with BW star schema
1.We store characteristics in master data tables
2.for earch and every dimid system will generate a sid in the sid table which is uniquely identified by system through this sid concept it links up dimid with master data table.
3.yes it is possible to have characteristics with no master data.(EG line item dimension)
4.dimension attribute is nothing but the characteristics infoobject,
but i am not sure about described attribute as i've not heard of it.
Regards
Madhavi

I have a question to ask you about General Data Selection in Report Painter

Please help me out. Thi is the question....here it goes.
In a Report in ReportPainter, I have in the General Data Selection the following selected characteristics. They are:
Ledger = 0
Record Type = 0
Version = 1
Fiscal Year = Z-ANOACT
Period = (1CPERIV, 1CPERIB)
So that we have the next screen in the Reports execution.
Fiscal Year : 2006
From Period : 1
To Period     : 12
Note:
*Z-ANOACT = Variable so that with a user-exit calculates the actual year. Right now is 2006.
*1CPERIV = This From-Period Variable is referenced to CCSS Table and PERBL Field Name. Its default value is 1.
*1CPERIB = This To-Period Variable is referenced to CCSS Table and PERBL Field Name.
Its default value is 12. Rigth now, we are in the fiscal month 5 (November).
Id like to filtrate information from January (2006) to September (2007). I mean I work with the fiscal calendar because the information to get from the table is saved due to this calendar.
The Fiscal Calendar is from July to June:
July = 1
August = 2
September = 3
June = 12
How I can accommodate my variables or what I am doing wrong so that I can select information from periods 7 to 12, 2006 ( January to June, 2006) and information from periods 1 to 3, 2007 (July to September, 2007) having the screen cited above and having the information selected added.
I cannot do it with the criteria selection cited above because I only have a year and a range of periods and my end-user doesnt want to run my report twice:
One run with periods 7 to 12, 2006 and
Another run with periods 1 to 3, 2007
Hed like something in my screen like this
Fiscal Year = 2006
From period = 7
To Period     = 12
Fiscal Year = 2007
From period = 1
To Period     = 3
And to get the report added.
Many Thanks if you know anything that can help me, please let me know.

ABDUL: I understand the ABAP Code but the information is saved in the table according to the fiscal calendar.
Fiscal Calendar Number of the MonthYear
January             7                    2006
February            8                    2006
March               9                    2006
April               10                    2006
May                 11                    2006
June                12                    2006
July                1                    2007
Augost              2                    2007
September           3                    2007
October             4                    2007
November            5                    2007
December            6                    2007
Normally, We are in November 2006 (month=11, year 2006).
However, fiscally; We are November 2007 (month=5, year=2007).
Important Notes:
     The information is saved according to the fiscal calendar in the table.
     My end-user wants to filtrate the information from January to November . I mean
Actual Year : 2006               Actual Year   : 2007
From   Period:      7     AND           From    Period:      1
To       Period:     12               To        Period:       5
I understand you told me about the ABAP code, for example my characteristics in the general data selection are:
Actual Year : 2006
From   Period: 7
To       Period: 5   (I would have an error here because From-Period Variable is greater than To-Period Variable)
According the ABAP code you told me, this would be:
Actual Year : 2006
From   Period: 1
To       Period: 11
If I run the report with these last parameters you told me, report painter only would add information from year 2006 and fiscal months 1 to 11 (July to May except June). We dont want this, that we want is :
Actual Year : 2006               Actual Year   : 2007
From   Period:      7     AND           From    Period:      1
To       Period:     12               To        Period:       5
How can I do this?? My email is [email protected] or [email protected]
Right now, the end-user runs the report twice and adds the information in excel. One run for :
Actual Year : 2006
From   Period:      7
To       Period:     12
And other run with:
Actual Year   : 2007
From    Period:      1
To        Period:       5
But the question is how you can do it with only a run and in this way:
Actual Year : 2006               Actual Year   : 2007
From   Period:      7     AND           From    Period:      1
To       Period:     12               To        Period:       5
Thanks if someone can help me!!

Few questions to ask.

Hi All,
I would really appriciate, if you could throw some light on following questions.
Note: Non rman backup.
1. I need to refresh perform full referesh with HOT backup, so that it woud identical to source till 31-AUG-09 22:00 PM. Now, my hot backup finished on 30th aug
19:00 PM. now, how to know, how much archived need to apply to take database to the desirded state.
2. Can we use until time with HOT backup ? if yes, can you direct me the link or document.
your swift reply would be highly appriciated.
hare krishna

Amit Beheria wrote:
I just read a Arup's rman recipie book where he reveles, even if time based recovery, oracle internally convert time into some SCN number to aviod day light savings.
However, is there any way We can extract it?
hare krishnaIf you want to extract scn from timestamp - or convert timestamp to scn, use TIMESTAMP_TO_SCN function
See this article: http://arjudba.blogspot.com/2008/05/how-to-get-scn-from-database-timestamp.html

Andreas Finkler ,i have some questions to ask you ,i will go to germany, can i buy labview books in english in your country?

thank you
[email protected]

Yes,
for example via Amazon (www.amazon.de) it is possible to buy emglish books ...
HTH,
Michael

Few questions about Satellite A300D-14P functionality

I have model Satellite A300D-14P for one month. Warranty 2 yrs. I have few questions, and asking for help, and suggestions what I should do?
*My camera quality * is VERY poor, Only with very much light on, I can get generally ok picture quality. Indoor, beside turned on both options, night mode or backlight compensation I hardly can see my face, very dark and poor quality. Second problem is blue led light, it is annoying because half of picture is always blue, somehow that light taking half picture which is always blue:((( I used notebook model from L300 series ( cheaper than mine) with same camera and that blue light, it is working perfectly :(
*Battery life and start up Vista OS*? ??In power save mode hardly 1.5h ??? Just surfing and nothing else....I asked Toshiba support here in Serbia about that and they told me that it is normal, and measuring of battery life (2, ...h) by specifications, is when my display is off and computer don't do anything ??? They also told me that normal start up time for Vista OS is around 1.45min maybe more???
If I install win XP is it possible to get battery life longer?
Do I need to go in Toshiba service or what?
Thank you very much and sorry if I am boring :))))
Nikola

Hay Nikola
You are not boring at all and welcome on this forum.
I don't know where to start. ;).
I have Satellite A300-1LI in front of me and I use it about a month now. Start-up time is very interesting theme and with right configuration you can optimise it and make it much shorter as with factory setting. Please read one very interesting thread about it under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
Do the same with your Satellite and I hope you will be satisfied.
Battery running time? I must say that information about two hours is realistic and I can confirm it. The same on my Satellite. But to be honest for mobile computing it is OK. I have changed several notebooks and just business notebook Tecra has had linger battery running time. What you can do is to check Toshiba support site and pick up info about more powerful battery. I am not sure but you can use Battery Pack (Li-Ion, 9 Cell, 6000mAh).
About cam I cannot say much. On my Satellite it works OK and I am satisfied. OK the quality is not the same like on good external webcams but for integrated cam it is OK.
If you are not satisfied try to talk with nearest service or try to compare it with some other Satellite by your local dealer.
So Nikola, if you have more questions please post again.

Few questions regarding requirements in context of SAP products

Hello!
I have few questions regarding Relational Database, Network Archtecture and Platform Support requirements in context of SAP products. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported (Yes/No)
b) database accept binary-large-objects (BLOBs) and be referenced via the relational engine (Yes/No)
c) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
d) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
e) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)
Thank you!
Regards
A. Henke

Hi Axel,
I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?
regards
Barthez

KDE4 + wallpaper slideshow: few questions about performance / tuning.

Hello,
I am using KDE 4.4 from pacman and set my desktop activity to slideshow. I would like to customize few things and thus - I have few questions:
1) Is it possible to change / disable transition effect when changing wallpapers? All my desktop is choppy and not responsive while the wallpaper changes and I am wondering if there is a way to repair this? (all images used as walls are at max 3MB big, usually something about 1MB. I have 7200 RPM disk, 2GB of ram and rather fast graphics card with newest Nvidia drivers, so I don't know what is the cause of slowdown...)
2) How can I programatically progress wallpaper to next image (not with the right click / Next Wallpaper image)?
3) Is there a way to disable the wallpaper change while there is a fullscreen application running? I am asking this, because when I watch HD movies and the wall changes, movie playback is really choppy... (I think that answer to the first question will also help me in this case).
I would be glad for any sugestions / interest in helping me;)
Best regards,
Mike.

Hello
1/ There's no way I know to remove the transition. Using the "raster" graphics engine helps a lot on performance : kill plasma-desktop and launch `plasma-desktop -graphicssystem raster`
2/ There's a plasma applet for this :
http://kde-look.org/content/show.php/Ne … tent=94251
http://aur.archlinux.org/packages.php?O … twallpaper
Maybe you can adapt it to your needs / find out how it works.
Last edited by xvello (2010-05-16 16:20:24)

Few questions on EB-SUS scenario?

Dear Experts,
I have few questions on EB-SUS scenario which you may help with your expertise. It will be helpful for those who are new to scenario?
1. EB (enterpise Buyer or SRM) -SUS scenario is used for requesting external staff? can it be used for non stock or free text items in extended classic? does it support direct material procurement ?
2. Does EB-SUS or SRM-sus support service item with hierarchy like MM-SUS?
3. EB-SUS scenario is basically on extended classic or standalone scenario? But, in extended classic scenario, it does support only Purchase order and PO response scenario? What badi's or customization is required to enable the confirmation and invoice for extended scenarios?
Full marks for good answers !!!
Thanks and regards,
Ranjan

Hi,
I am also interested in this question with another view of it:
- Can SUS be used together with SRM (EB) for consumables in standalone scenario?
- What are your experiences with SUS in general. I foresee that we would need some add-on development to the solution, is this easily done or does it take a lot of effort?
Thanks for any good input
Fredrik

Few Questions on EP

Hi All,
I have few questions on EP implementation:
1) Can SAP r/3 transaction screen be accessed(say creating a PO using T-code ME21) from a company's subsidiary which is in a remote place(assume r/3 is intalled and running at headquarters).
2) Do we need to have Portal installation at the remote location aswell or just the internet connection with the URL to access the page and needed logon credentials?
thank you
Chandu

HI Chandra,
You can see the documentation available on SAP help and there are documents available on SDN too.
Refer to the following:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">Creating Transaction iViews</a>
<a href="http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/WAS/Enabling%20the%20SAP%20GUI%20for%20HTML%20with%20the%20integrated%20ITS%20on%20SAP.pdf">Enabling the SAP GUI for HTML with the integrated ITS on SAP</a>
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/736">Create SAP Transaction iView using SAPGUI for Windows</a>
Regards,
Siddhartha

Few questions about unibody

So im getting rid of my white 2,16 this week and then getting a new unibody macbook 2 weeks from now. Im not sure which model im getting yet but most likely the 2.4ghz one. I have a few questions to ask that have kept me a bit curious.
1.How strong is the glass over the screen? Dont want it be like the iphone
2.Are the edges sharp?
3.How much ram can this system hold?
4.How big of a HDD can it take?
5.Any moisture problems being in the cold?
6.Any build issues I should keep in mind?
7.How great are these new graphics cards compared to mine?
8.Does the Macbook feel solid?
9.Pros
10.Cons
I know its alot of questions but I would appreciate it if someone would help me out with those. Thanks in advance!

1. I don't know but since the glass doesn't have the same function as the iPhone it probably is ok
2. No unless you really push your hand against them, I barely ever notice them
3. 6GB is the max for the Unibody Macbook, I believe the Pro's can hold 8GB
4. As big as it gets that is still 3.5 inches but still 5600 rpms is preferred
5. I haven't had any but I'm not in any extreme cold climate
6. Not that I know of other than no firewire if that's what you mean
7. They are a significant improvement, they run everything properly and much more fluid
8. It is really solid, compared to a Macbook Pro (non-unibody) it is much more solid.
9. Solid, Trackpad is awesome and time saving, graphics are nice, LCD screen is very bright
10. Glossy display (if you don't like it), No Firewire port

Have few questions to ask regarding clusters

Similar Messages

Maybe you are looking for