Have FIOS Quantum router up and running - but now can't connect to Tivo or my Aria scale -help!

Getting my router set up was quick and easy, but now I have a problem that has me stumped. I am not a router expert, so need help.
Neither my Tivos nor my Aria scale can connect to my router.
Tivo sent me this page: http://support.tivo.com/app/answers/detail/a_id/402
I am not sure that I am well-versed enough in router speak to figure it out on the admin dashboard.
Anybody who has run into this and has advice for me?
I have gone through the Tivo settings and Aria set-up, but both produce errors. For Tivo, it can't find the DHCP server. Aria just gives me a Wifi error message.
HELP!

Interestingly enough, as soon as I plugged in our old trusted ActionTec, my Tivo connected without a problem, and I got my Motorola NIM100 to stop blinking. Go figure. On the phone now with Verizon (on hold) to figure this out. If not, it's going back.
Speli wrote:
Getting my router set up was quick and easy, but now I have a problem that has me stumped. I am not a router expert, so need help.
Neither my Tivos nor my Aria scale can connect to my router.
Tivo sent me this page: http://support.tivo.com/app/answers/detail/a_id/402
I am not sure that I am well-versed enough in router speak to figure it out on the admin dashboard.
Anybody who has run into this and has advice for me?
I have gone through the Tivo settings and Aria set-up, but both produce errors. For Tivo, it can't find the DHCP server. Aria just gives me a Wifi error message.
HELP!

Similar Messages

I have purchased an audiobook on my iPad but now can't play any of my audiobooks and can't transfer to my computer

I have purchased an audiobook on my iPad but now can't play any of my audiobooks and can't transfer to my computer

does it play on your computer?
If not you cannot redownload audiobooks from the itunes store. So report it as a corrupted file to itunes store support
http://www.apple.com/emea/support/itunes/contact.html

HT1933 I have tried everything including reseting my iPhone but still can't connect to App Store, and it's been over a week now! Totally annoyed now!!

I have tried everything including reseting my iPhone5c but still can't connect to App Store, and it's been over a week now! Totally annoyed now!! I'm not sure if it started after I updated my iOS cos I was able to update a few other apps. I just can't connect to neither apps store nor iTunes! I need help else I'd boil this phone alive!

Hello IamJudekow,
Thank you for the details of the issue you are experiencing with connecting to the App Store on your iPhone 5c. I found a couple of articles I recommend for this issue.
First, I recommend using the steps in the section titled “Troubleshoot issues on an iPhone, iPad, or iPod touch” in the following article (the article title refers to the iTunes Store, but the steps are relevant for the App Store as well):
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If the issue persists after following the steps in that section, I recommend continuing with the steps in the section titled “Isolate the issue: (Mac OS X, Windows, iOS)” in the article below:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M.

TS1372 I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives. If that info is true, the question is, do you have a compatible combination of logic board and hard drive?

Ios upate 7.1.2 done but now can't connect to itunes

I did the IOS 7.1.2 software update for my ipad2 and now I am unable to connect to iTunes or the app store at all.
Under my settings for iTunes it has the correct applied and info. But when I check the settings for icloud it says "Verification Failed: The certificate for this server is invalid. You might be connecting to a server that is pretending to be "Setup.icloud.com" which could put your confidential information at risk."
My on option is to press OK...
I've tried restarting the IPAD, reconnecting to my pc to update and resync, but no joy.
Any ideas

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
 Cheers, Tom

I have saved documents with oages and numbers but now I can't open them they show as several files in preview mode why?

Why are my saved documents comkmg up in preview mode and I can't access them?

Hi Gail,
A Numbers document is actually a bunch of files that (usually) appear to be a single file.
What version of OS X are you using on your MacBook?
What version of Numbers? Numbers 2 (Numbers '09) or Numbers 3? The latest version of Numbers is 3.5 on OS X Yosemite.
More information will lead to a solution .
Keep posting.
Regards,
Ian.

I can receive email but now can't send or reply-rebuild Macmail? Need help

I receive email ok but all of a sudden I cannot send email or reply to email using Mac Mail. The error message says----
Message could not be delivered and will remain in outbox,
The sender address xxx@xxx was rejected by the server.
Someone said to delete macmail program and then rebuild it.
How do I save my mail in my mailboxes and special folders and address book before deleting current macmail program?
Any help appreciated.
Thank you
Chas

Which email client is this?
In Safari / Preferences - Security. Make sure Java is enabled.

HT204053 i have put in my apple id and password but still can not get imessage and facetime to work

I have put in my apple id and password but still can not get imessage or facetime to work please help...thanks

Please try to sign in at https://appleid.apple.com
Check if your new username/email address is verfied
If this works, delete your account on your iPhone (Settings > iCloud)
Sign back in

I can connect to a network but I can't connect to internet...

Hi! I have a rarely problem:
When I try to connect to a wireless network I can and it shows that I have a high signal on the menu But I can't connect to the internet or it runs very slow... The macbook says that I'm connectet to the internet :S. I try to connect from windows XP with bootcamp at the same network and it runs very fast... What's the problem?? Thanks!
Sergi

Yes, this is possible ... but understand that you would need two switch wireless networks between network/Internet access and for printing.
The AirPort would not get a Public IP address, but it would have a Private IP address of 10.0.1.1 ... and it would be providing wireless clients connected to it with Private IP addresses in the 10.0.1.2 - 10.0.1.200 range.
AirPort Utility > Select the AirPort > Manual Setup > AirPort > Wireless
Wireless Mode: Create a wireless network
Wireless Network Name: <enter a desired Network Name or SSID>
Radio Mode: <leave the default or select a desired radio mode>
Channel: Automatic
Wireless Security: <select the desired wireless security type>
Internet > Internet Connection
Connect Using: Ethernet
Connection Sharing: Distribute a range of IP addresses
Internet > TCP/IP
Configure IPv4: Manually
IP Address: 10.0.1.1
Subnet Mask: 255.255.255.0
Router Address: 10.0.1.1
DNS Server(s): <leave blank>
Domain Name: <leave blank>
Internet > DHCP
DHCP Beginning Address: <leave default or change to a desired starting address>
DHCP Ending Address: <leave default or change to a desired ending address>
Advanced > Logging & Statistics
Allow SNMP (unchecked)
The AirPort will still report at least three errors: 1) Configuration of WAN, 2) SNMP over WAN, and 3) Double NAT. These can all be safely ignored to stop the AirPort's status light from flashing amber in this configuration.

HT3819 I can use remote on my iPhone to connect with my iTunes library, but i can't connect to another computer using home sharing to access apple tv. I have used the same access ID and password that is used for the apple tv.

I can use the Remote app on my iphone to connect with my itunes library on my computer, but I can't connect to the Apple TV using home sharing with another computer in the house. I am using the same ID and password that the apple tv uses to connect with the other computer. Also how do I check what version of IOS that my iphone is using?

Version:
iOS Settings>General About (or it'll say when you hook it up to iTunes)
Are all the devices on the same physical network? I think you're saying all are set up using the same home sharing credentials.
If you've not done so restart all devices and your router.
If you can get any of the devices connected by ethernet to reduce the wifi burden that may help but to be honest I would not expect simply beoing on wifi to prevent devices/computers appearing in the list.
Does the other computer have any firewall or port blocking software running?

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

Up and running, but veeeerrry slooowwwly

I've got an Xserve I set up recently. It's an Open Directory Replica and is bound to Active Directory (DNS is also hosted by Active Directory). It's running, it responds just fine to pings, the DNS responses for the IP and hostname are coming back fine.
However, there are many things it has trouble with. For starters, if I try to connect to it with Workgroup Manager or Server Admin, it's extremely slow, even when run locally. It will also choke frequently, posting an error telling me to refresh the display.
iChat server is up and running, but any client I try to connect to it -- iChat clients on MacBooks or Spark clients on PCs -- says the host can't be found. Meanwhile, the same settings work when connecting to an Xserve in another campus which is configured the same way. I'm also trying to get iCal server up and running, but it keeps saying a virtual host can't be found, and again, near as I can tell, the required services are set up the same way on our first server, the OD Master.
I don't know if it's related, but logins for our MacBooks are also extremely slow, and we frequently get the login box shaking at us. (I've had a few teachers jump in their car and drive down the street out of network range so they can log on with their cached mobile credentials because it's faster and more reliable.) We don't seem to have the same problem at our high school campus, where the laptops are configured the same way. Clients are bound to the local Xserve and to Active Directory, and the OD server is before AD in the search order.
The only difference in setup between this one and our last is an Apple software engineer set up our first one, so I'm worried I may have missed something. There is no firewall configured, and the changeip command indicates I'm not having any host/IP conflicts. I'm kind of an Apple rookie, so I'm kind of at a loss as to what to look for next. Any help would be greatly appreciated!
Thanks,
Mike Oliveri
Tech Coordinator
Roanoke-Benson CUSD #60

I feel like I'm getting closer. First, the connector on our cable didn't fit snugly. Tug it slightly and it lost contact. I put a new cable on the server and now it seems more robust. Server Admin opened faster, anyway.
In the Console, I'm seeing some Kerberos errors:
8/31/09 10:00:17 AM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 5 seconds
8/31/09 10:00:17 AM com.apple.KerberosAutoConfig[892] Couldn't find KerberosClient config record
8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
8/31/09 10:00:43 AM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 10 seconds
8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
8/31/09 10:00:44 AM com.apple.DirectoryServices[26] [2009/08/31 10:00:44, 0, pid=902] /SourceCache/samba/samba-187.8/samba/source/libads/kerberos.c:adskinitpassword(228)
8/31/09 10:00:44 AM com.apple.DirectoryServices[26] kerberoskinitpassword [email protected] failed: Preauthentication failed
8/31/09 10:00:45 AM com.apple.DirectoryServices[26] [2009/08/31 10:00:45, 0, pid=902] /SourceCache/samba/samba-187.8/samba/source/libads/kerberos.c:adskinitpassword(228)
8/31/09 10:00:45 AM com.apple.DirectoryServices[26] kerberoskinitpassword [email protected] failed: Preauthentication failed
8/31/09 10:00:46 AM com.apple.KerberosAutoConfig[909] Kerberos configuration is up to date
This server is bound to Active Directory (using Directory Utility -- don't know if I need to do it elsewhere?) and I'm not sure what was trying to authenticate at that time.
My error messages for "server not found" have gone away for my iChat client, but now it just pops up the authentication window over and over when I try to log in. I'm wondering if there's something missing in the server binding?
Mike

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours.

Have FIOS Quantum router up and running - but now can't connect to Tivo or my Aria scale -help!

Similar Messages

Maybe you are looking for