Have Home folders Eric and Eric 1 due to problems with Migration Assistant

I have duplicate Home folders for my user accounts after trying several times to copy user data from my old MacBook to my new MacBook Pro. I have deleted the folders labeled "from old Mac" and the non-active Eric folder that were the duplicates from failed migrations. Essentially, I have the short name user Eric but Home folder named Eric 1. The short name is, of course correct, but Mac OS always appends numbers to duplicate folders when creating them and in this case you can't change the folder name to reflect the user name.
There are a number of KB articles detailing how to rename or add new User accounts, but I don't need to do that; I just want my Home folders to not have the appended 1s in their names. Is this fixable without erasing the drive and reinstalling / migrating all over again?
Thanks!

Hi,
Assuming you have everything backed up, I think you could try the following steps to change your home folder name from *Eric 1* to Eric:
Proceed with the first three steps advised by the [KB article|http://support.apple.com/kb/ht1428] mentioned earlier:
For Mac OS X 10.5 or later
1. [Enable the root user|http://support.apple.com/kb/HT1528].
2. Log in as root.
3. Navigate to the /Users folder.
If the inactive Eric folder has not yet been deleted, either delete it now, or rename it to something like Eric.old.
Rename the *Eric 1* folder to Eric.
Still logged in as root, go to System Preferences>Accounts, control-click on the Eric account, and click Advanced Options. On the next screen, change the Home Directory field from */Users/Eric 1* to /Users/Eric, and then click OK.
Then restart, and try to log in normally as Eric. If all goes well, disable the root account.

Similar Messages

  • I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    fighter19lisa wrote:
    that only makes it say its synced, when its not.
    No, it does not.  It transfers purchases from the iDevice to the computer.  The computer must be authorized for the Apple ID that the content was acquired with.
    fighter19lisa wrote:
    my playlists wont show up on the phone.
    Are they selected to sync?  Is Manually Manage content on the device selected?
    fighter19lisa wrote:
    i had to change my password for my aol account again and i still cannot get my email on my phone to even work
    What does that have to do with syncing content to the device?  FYI, nothing.

  • I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

    I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

    Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

  • Problems with migration assistant between macbook running leopard and macbook pro on lion

    Hi,
    I've just got a macbook pro running lion and am having difficulties transferring through a network from a macbook (running latest version of leopard) onto it.
    It just keeps telling me to update migration assistant on my macbook, which I've tried doing but it already says it's completely up to date.
    I've tried checking that filesharing/firewall etc. is enabled on both.
    Does this mean I have to get a firewire cable? What do I need to do?
    Thank you for any suggestions.

    Turn off your Leopard machine, leave your Lion machine on. Connect your firewire cable between both computers. Start up the Leopard computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the Leopard computer should become available to the Lion computer and will likely appear on desktop.

  • Problem with Migration assistant permissions on User Home

    I bought a shiny new mac air, and wanted to transfer my user account "bruce" from the old computer to the new one.  I created an account "rachel" on the new computer, plugged both computers into hub and ran migration assistant.  When I attempted to log on to "bruce" on the new computer, everything was wacky.  I discovered that the program did not set the correct owner.  /user/bruce was owned by Rachel.  After I changed the owner (sudo chown bruce bruce) life was good.  Hope apple can fix this so others dont waste as much time as I did trying to debug this.
    Bruce

    Oh, sorry, I wasn't clear.  It's all there (mostly painlessly, which makes me nervous )
    Both sites are currently up and running -- I haven't started putting "this page has moved" on the MobileMe pages yet.  
    I think I should wait for a few days, so folks following recent links won't see that.
    Once I do, I'll leave it up that way until Apple pulls the plug.

  • I have two Apple IDs, and this is causing problems with syncing via iCloud. How do I move everything to one ID? All advice is for setting up, not for after it's already set up.

    My problem is that I have been a Mobile Me user for the past couple of years, and because of that a second Apple ID was generated in addition to the one I've been using for years. When iCloud was introduced last fall I did everything I was supposed to in setting it up, but it is evident that the syncing is not working as it should. In checking, I am certain this is because I now have two active Apple IDs. I would assume this is a common issue with all who were/are Mobile Me users.
    The online help says you can't merge two IDs. Okay. What I want to do is to get rid of the Moble Me ID and only use my regular Apple ID. But the help on that issue seems to only give instructions for setting up the iCloud account. It seems that when I go into my iCloud accounts, both on my iPhone and my Mac, I can view the ID but there is no way to change them to another ID or to eliminate the account.
    Please help. I am a long-time Apple user and this really should be a fairly simple matter to take care of, but this is one issue where the normally user-friendly Apple way of life is giving me fits. Thanks.

    I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

  • Phone heats up, hangs and restarts due to problems with the media index.

    A few times a week my phone heats up, hangs, and goes into a restart loop every few minutes, which drains the battery quickly. After some research in the diagnostics app I have come to the conclusion that it is the Media Storage app that hangs. I see spontaneous restarts in the android.process.media process every few seconds. A work-around is to go into settings, apps, all apps, media storage (Lagring av Media, in swedish, or android.process.media in android) and clear data. This immediately stops the problem, but then I usually need to reboot the phone manually once to get it to rescan all media again, since all that indexed data was lost.
    I suspect that my sd card (SanDisk microSDXC Mobile Ultra 128GB (Class 10)), with 90GB of MP3 files has somehow related to do, or at least makes matters worse, although I haven't tried to go for a week without it. The media data is usually around 50MB, when I clear it, this quickly rebuilds, until next time...
    The media storage index seems to be prone to corruption, and/or one or more processes reading or writing is corrupt.
    This is a nuisance since if I don't catch it rebooting right away I can be without battery quickly.
    So, even though the fix is easy now that I've found it, I would rather not have the problem at all. Worst of all, is when this happens when I'm in a call, or when someone tries to call or text me, but I don't notice, since the phone is hung. Also there is nothing wrong with the phone, this must be a software issue, where an error isn't handled correctly.
    In the early days of researching this problem, I did a factory reset, which actually cleared up some other issues I'd had with bluetooth connection in the factory installed software (even though it was of the same version). After this I waited to install any apps, and just went with standard vanilla android and sony apps. Still the same problem occurred after a couple of days. So it isn't related to third party software either. I see lots of posts online which detail this workaround, some as old as a few years old, but none with a real solution.
    Help please?

    I recieved a reply from Sony Xperia Care support. They suggested removing the SD-card to see if that helped. Fingers crossed I have now gone three days without acting up. The next time it does I'll try removing the sd card and see if I can break the record of seven days without a problem.
    They claim that it can be a hardware fault with the SD-card (highly unlikely in my opinion). Or a corrupt file on the card. I have only used the phone operating system and the Sony PC Companion application to transfer files. None of them have warned me about corrupt files. Also, if I can go seven days without a problem, why not eight? It's not like it acts up every time I access a particular file. It's just random, and rarely when I'm doing anything that access files on the sd-card.
    My guess is still that the media storage indexing is buggy. It's much more likely that the storage index is corrupt, than a file, for this behaviour to occur. Note that I work as a software test officer, with 25 years of IT experience, so I have a vague idea what I'm talking about.

  • I have a MacBook Pro and I'm having problems with it overheating, is there anything I can do to keep it cooled down?

    I am a new Mac owner, and I'm currently stationed in Kuwait.  My MacBook gets super hot on the bottom and it's performance starts to degrade.  The weather here is in the mid 80's now, I can only imagine this problem will get much worse once the temps go above 100 in the near future.

    1. Try the suggestions in this article
        http://support.apple.com/kb/TS1473
    2. Reset SMC.    
        http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • I have the iphone 4s and i am having problems with my applications. they won't open. what do i do??

    My applications will not work. I tried syncing it, restarting it and nothing worked! What do i do??

    Try downloading any free app to resync your iTunes account.

  • ORA-12952 and Oracle 10g XE problem with migration to 11g XE

    Hi, all
    My DB (Oracle 10g XE) reach storage limit. I have tried to migrate to 11g XE version but unsuccessful.
    For migration I used next manual: http://download.oracle.com/docs/cd/E17781_01/install.112/e18803/toc.htm#XEINW136
    expdp returned next error:
    Processing object type DATABASE_EXPORT/SCHEMA/CLUSTER/INDEX
    Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
    ORA-39125: Worker unexpected fatal error in KUPW$WORKER.CREATE_OBJECT_ROWS while calling FORALL [TABLE]
    ORA-12952: The request exceeds the maximum allowed database size of 4 GB
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 116
    ORA-06512: at "SYS.KUPW$WORKER", line 6248
    ----- PL/SQL Call Stack -----
    object line object
    handle number name
    2D6F0304 14916 package body SYS.KUPW$WORKER
    2D6F0304 6300 package body SYS.KUPW$WORKER
    2D6F0304 5638 package body SYS.KUPW$WORKER
    2D6F0304 2145 package body SYS.KUPW$WORKER
    2D6F0304 6861 package body SYS.KUPW$WORKER
    2D6F0304 1262 package body SYS.KUPW$WORKER
    285BD50C 2 anonymous block
    Next I have tried to garbage some information from DB but I got some as "UNDO cannot get next block" error.
    What else can I do to migrate the data from 10g with limitation problem to 11g?
    Thank You in advance.

    There is output from SQL:
    "OWNER"; "TABLESPACE_NAME"; "COUNT(*)"; "SIZE_MB"
    "A1"; "USERS"; "899"; "3995,9375"
    "SYS"; "SYSTEM"; "980"; "323,1875"
    "FLOWS_020100";"SYSAUX"; "658"; "297,625"
    "SYS"; "SYSAUX"; "626"; "151,125"
    "XDB"; "SYSAUX"; "753"; "84,5"
    "SYSTEM";"SYSTEM"; "259"; "31,75"
    "SYS"; "UNDO"; "10"; "20,25"
    "MDSYS"; "SYSTEM"; "96"; "12,25"
    "SYSTEM";"SYSAUX"; "109"; "6,8125"
    "CTXSYS";"SYSAUX"; "74"; "4,625"
    "D1"; "USERS"; "14"; "3,5625"
    "DBSNMP";"SYSAUX"; "25"; "1,5625"
    "HR"; "USERS"; "25"; "1,5625"
    "FLOWS_FILES";"SYSAUX"; "7"; ",5"
    "OUTLN"; "SYSTEM"; "8"; ",5"
    "TSMSYS";"SYSAUX"; "4"; ",25"
    1. When I tried to delete some old data from USERS dataspase by some PROCEDURE I got the next error:
    ERROR at line 1:
    ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDO'
    This problem I solved. PROCEDURE generate huge buffer for transaction. Therefore I deleted the old data by small pieces.
    After I have deleted the old data the Application start to comunicate with database without ORA-12952 error.
    2. I've reduced the size of SYSAUX (http://remidian.com/oracle/purging-sysaux-tablespace-purging-awr-reports.html) down to 94%
    3. I has SYSTEM tablespace 100% full. When I've tried to resize the SYSTEM table up I got the ORA-12952. Then I've increased the SYSTEM table size by 1M. In such way I got additional 9Mb for the SYSTEM tablespace (from 360Mb to 369Mb 98%). Is any other way to reduce of the SYSTEM tablespace filling?
    4. Next (http://wiki.oracle.com/page/Data+Pump+Export+%28expdp%29+and+Data+Pump+Import%28impdp%29)
    on the step: $ expdp system/<password> DIRECTORY=expdp_dir DUMPFILE=expfull.dmp FULL=y LOGFILE=expfull.og
    i got the error:
    Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
    ORA-39125: Worker unexpected fatal error in KUPW$WORKER.CREATE_OBJECT_ROWS while calling FORALL [TABLE]
    ORA-12952: The request exceeds the maximum allowed database size of 4 GB
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 116
    ORA-06512: at "SYS.KUPW$WORKER", line 6248
    There is my last state of the tablespace filling:
    "Tablespace"; "Size (MB)"; "Free (MB)"; "% Free"; "% Used"
    "UNDO"; "500"; "411,6875"; "82"; "18"
    "SYSAUX"; "570"; "31,5"; "6"; "94"
    "USERS"; "4180"; "178,875"; "4"; "96"
    "SYSTEM"; "369"; "1,25"; "0"; "100"
    "TEMP"; "291"; "0"; "0"; "100"

  • I have a iPhone 4S 16 gb and I am having problem with sim activation please tell me what to do

    I have a iPhone 4S and I am having problem with its.activation plz tell me. The solution of this problem?

    Did you already try these steps?
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
    copied from iOS: Troubleshooting activation issues

  • HT5622 Due to problems with my original email I changed my apple id email and password months ago.  Suddenly it is reverting to my old email.  How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

    Due to problems with my original email I changed my apple id email and password months ago.  Suddenly it is reverting to my old email.  How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

    Hey 1Jerry,
    Thanks for the question. You'll want to delete and re-add your iCloud account (utilizing the new Apple ID address). When prompted, opt to keep as much information on your device as possible. The following article provides information on how to do so:
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Turn off iCloud completely
    Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
    On your iOS device’s Home screen, tap Settings > iCloud, then at the bottom of the screen, tap Delete Account.
    Thanks,
    Matt M.

  • I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How?

    I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.

    Hey Frankgates!
    I have an article here that can tell you how to do this:
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

    I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.  

    Was it purchased from an official Apple Store, not a reseller?  Only Apple Stores sell official factory unlocked phones.  The others sell hacked to unlock phones, and the unlocking is unstable.
    Try these steps, as needed:
    1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
    2. Settings > General > Reset > Reset Network Settings.
    3. Replace SIM card (and reset network settings again)
    4. Restore Phone in iTunes using a backup
    5. Restore in iTunes as new, without using a backup

  • I have a ipad 2 and it does not connect with safari using 3G

    I have a ipad 2 and it does not connect with safari using 3G

    Sorry to hear you are having issues, but there are 2 ways you can print from that device.
    The first one is to simply email photos or documents to your printers email address by attaching them to a new message.
    The other option is to download the HP ePrint Home and Biz app from Google Play. The app is free and should allow you to print pictures and documents to the printer with ease. I have added a link below on how to get started with this app.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

Maybe you are looking for

  • XML Not working

    Hi, I'm trying to bring a project file from a computer with FCP 5.0 back to 4.5. The XML file is 35 MB and takes about twenty minutes to import 40% into my 4.5 system. At about 40%, I get an error message stating that errors in the XML have aborted t

  • User authentication and Searching in ADAM

    Hi, I am facing a problem in ADAM Search. I am able to authenticate with an user but failing in ADAM Search. I didnt understand what could be the problem. I am giving my code here. String adminName = "CN=kalyan,OU=ADAM users,O=Microsoft,C=US"; String

  • Show only subset of labels from a data series

    I'd like to show only a few labels from a given data series.  I saw some work-arounds posted from 2010 (e.g., add a new series with just the items to be labeled; turn off all labels on original data series).  Was wondering if it's possible to deal wi

  • [AS,CS3] Crouching tiger hidden feature (nearly)

    Learning to use InDesign at the same time as learning to script it. Never  have been much for setting next styles in paragraph styles, but was impressed on trying out the feature when a range of paragraphs are selected of holding down the control key

  • Problem in installing oracle in linux 1.6.9-5 ES

    Hi, When i try to install oracle database in linux i am getting the below error [oracle@mail oracleDisk1]$ ./runInstaller [oracle@mail oracleDisk1]$ Initializing Java Virtual Machine from /tmp/OraInstall2006-12-21_10-06-19AM/jre/bin/java. Please wait