Have HP C8180 printer. Updated Mac to OS 10.8.5. Now Mac does not recognize printer.
Have an HP C8180 printer. Upgraded OS to 10.8.5 on my Mac. Now Mac does not recognize printer.
Hi ..
Try a reset > Mac OS X: How to reset the printing system
Similar Messages
-
We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?
You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/
-
Under the direction of Apple Support, I recently erased my iMac (Intel) hard drive, reinstalled and updated software and migrated data from an external hard drive via Time Machine.
Now, after clicking on "PRINT", the print dialog box says "printing" then says "no pages found", and finally says "stopped"; and when I plug in my camera to download photos, the camera is not recognized. Both printer and camera are connected via USB.
I checked connections, verified printing and iPhoto preferences, turned printer off then on again, unplugged and replugged USB connections, and checked and followed directions in the Help menu.Thanks very much, I'd just tried rkaufmann87's suggestion and entered "This solved my question" when your suggestion popped up—you deserve a "This solved my question" too, though I saw only an option for "This helped me".
Before I got rkaufmann87's suggestion, I repaired disk permissions and that resolved the camera problem. Both of you nailed the solution.
Thanks again! -
my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom -
My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?
I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?
-
I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?
Backup first
It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
Erase before the install
Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
During the install
Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages. -
By updating to IOS 6.1 something went wrong. The rsult is that I have picture of USB cable and Itunes on my Iphone and the PC does not recognize it. What can I do ? Pøease Help. My Iphone is dead !
you may have to do this a couple of times http://support.apple.com/kb/HT1808
-
Adobe Photoshop Elements does not recognize printer..error message says you must install printer. Other software does print documents.
Try opening an image in full edit, then press crtl+p
Wait for the print dialog to open and try to select your printer by clicking the dropdown menu.
-
I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.
I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK. It keeps telling me that this router is not supported. There is no firmware to roll back to. It worked fine until a power outage. HELP!
If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router. -
So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help
Me too and I have 4 devices which are now not recognized by iTunes but were immediately before ios8 upgrade
Come on Apple get your finger out and help us here please ? -
Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate
Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings. -
I have a Macpro Book and I just downloaded new software to my ipod touch(3rd gen). Now it does not show up in itunes nor does it turn on. I believe it just downloaded the software and never updated it. What do I do?
You appear to have a second generation iPod touch, not a third, and those can't be updated past 4.2.1. Apple sold 8GB second generation models at the same time as the third generation ones.
(70782) -
I could originally sync my iPad 3 on my Mac pro via iTunes. Now the computer does not recognize the device and shows as "not charging" on the device screen. It does still charge with the cord and will sync with my Mac book. I have current iTunes software installed and running 10.6.8. Any help would be appriciated.
Nope. iPads can only be synced with one iTunes library, and all content on the iPad would be erased if you tried to sync it with a different one.
-
IPad2 does not recognize printer
MY Ipad 2 does not recognize my printer which is a hp3050 j610
Hello Horrjeh,
I did see your printer on the list of supported printers for this app. The website I was on to fnd this information is:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&cc=us&dlc=en&lc=en#N702
You may check here for your information regarding your issue. If you are unable to find the printer from this app on your iPad 2, you may need to power off the iPad 2 and then power it back to enable a new connection and check the router settings for your network to make sure there is not a setting that is blocking your devices from seeing other devices on the network as some routers have this as a feature for security purposes.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
Yesterday I decided to finally update my iphone 4S to the latest operating system 7. It asked me for a password when upgrading but now does not recognize the password and will not let me in. FRUSTRATED. What do i do????
Hi Rachel,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Judy
Maybe you are looking for
-
How do I shrink the size of a window on my desktop when online?
I have a Mac desktop. I used to be able to go to the edge of the window or bottom or corner with my cursor and get a image that I could click and hold to change the size of my open window. I have unloaded and reloaded Firefox but still can't work. Ca
-
Best strategy for importing organized images
Hello, I have recently started using Aperture in my photography workflow and I need some advice from the experts on the best strategy to import the existing .JPGs from my hard disk into my Aperture library. Prior to using Aperture, my workflow was as
-
Problem(e) mit Kurvengraphen
Hallo! Wir haben mit der grafischen Darstellung von Signalverläufen in unserer Software Probleme. Die an der X-Achse angezeigte Zeit läuft viel zu schnell ab. Daher habe ich das angefügte VI einmal zum Testen des einzelnen Graphen erstellt. Nun trete
-
When go to the next MP3 song in the player, the file name will display very quickly (< second) and then display the title statically. Is there a way to see the file name+title scrolling instead of jumping to the title only? The reason is that the fil
-
Need Help, setup OBIEE 11g user password expiration
Hi, Any one know how to setup OBIEE user password expiration? Requirement: create demo user in OBIEE and the demo user password should expired weekly. Thanks, allan