Have I been upgraded or not?

On the weekend I received an email from BT saying I was going to be upgraded.
I assumed this meant I would be getting ADSL 2.
The so called upgrade has happened but the download sync speed is exactly the same.
Last week my sync speed was 8,128 Kbps downstream and 448 Kbps upstream.
The only thing that has changed since the so called upgrade is the upload speed.
I searched my modulation type on google and according to wikipedia I am not ADSL 2.
Anyway my line stats are now
Connection information
Line state Connected
Connection time 1 day, 2:04:58
Downstream 8,128 Kbps
Upstream 1,120 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Fast
Noise margin (Down/Up) 7.6 dB / 7.0 dB
Line attenuation (Down/Up) 33.0 dB / 15.5 dB
Output power (Down/Up) 19.8 dBm / 12.4 dBm
Am I really on ADSL 2?
Because I thought I should get at least another meg of speed
Solved!
Go to Solution.

Somethings happened.
I just had the idea of disconnecting the power to my router for 5 minutes.
Switched it back on and now my modulation type has changed to ITU-T G.992.5 and i'm now synced at 11,323Kbps downstream and 1,147Kbps upstream. although my noise margin is only 6 now so got to hope the line is stable.
Unfortunatlely though they have switched interleaving back on

Similar Messages

  • I have my aperture upgrade by not my original serial number

    I have my aperture upgrade but not my original serial number.
    any ideas?

    You need to contact Apple with a proof of purchase:
    See this document:
    Pro Application Replacement Serial Numbers:  http://support.apple.com/kb/HT1861
    -- Léonie

  • Have I been upgraded?

    Morning all,
    I received this message3 this morning following a supposed upgrade to my service yesterday:
    Hello,
    Good news. We’ve upgraded our network in your area
    Remember we let you know we were rolling out our faster broadband? We’ve now done it in your area. We always offer the fastest speed your line can take and now your broadband speed and connection should be faster and more stable than before.......
    I understand that the line needs time to stabilise so I suppose the drop in speed that I have is acceptable for the moment.  However my Homehub still says this:
    Modulation    ITU-T G.992.1
    Is this ADSL2?
    Thanks
    Mike
    Solved!
    Go to Solution.

    imjolly wrote:
    you are on adslmax 992.1
    upgraded will be
    992.3  adsl2
    992.5  adsl2+
    Apologies for to the OP for stepping in here but a quick Q for IMJOLLY, my exchange is due a WBC upgrade this July, however the BT line tester estimates only 11Mb/s after the change. To me this indicates 992.3 rather than 992.5, is 992.3 a stepping stone to 992.5 or just something thats provided instead of 992.5. I was hoping for 992.5 this year
    Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

  • Numbers on my iOS devices have recently been updated but not on my iMac is this correct ?

    Numbers on both our iPads and our iPhone were recently updated but there has been no update for our iMac is this correct ?

    Yes, Apple updated the iWork Apps for iOS twice this month. The first Update added features just like the Mac Counterparts but the second Updatehas bugfixes and fixed perfomance issues.
    Since the last Updates iWork finally runs fine on my iPad 3 :-)

  • The last few days Firefox, Safari and Chrome have all been going to "not responding" as soon as I open them. Has anyone else been having such a problem??

    IE8 is the only browser that seems to be working. Does anyone know what is going on??

    I understand that after using Firefox for a while there are some issues with speed. [[Firefox is slow - How to make it faster]]

  • HT4914 If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

    If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

    Dottie,
    If you want to upgrade the quality of a song in your library, you have to delete the library copy and download the matched copy.
    Once it is downloaded, it will stay in your library even you don't renew Match.

  • My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

    My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

    I think iCloud isn't coming until this fall and not until iOS 5 is publicly available. Right now there is confusion because all this stuff is still in beta and things are under NDA and may still change.
    I'd just set the 3GS up the same as currently. When iOS 5 is available in the fall (and I don't think Apple has specified beyond "fall"), before you update, there should be any number of guides to setting things up and how it will all work. http://macworld.com is a good place to look for such information.

  • Hello, my name is Karan Taneja and i have been a loyal Apple customer. I have been using Apple since it introduced iphone 4 and have been upgrading/buying every new phone Apple introduces after that. I was always happy and surprized to see Apple doing so

    Hello, my name is Karan Taneja and i have been a loyal Apple customer.
    I have been using Apple since it introduced iphone 4 and have been upgrading/buying every new phone Apple introduces after that.
    I was always happy and surprized to see Apple doing so good to its customers.
    Unfortunately, i experienced some thing really unprofessional and different this time.
    It begun suddenly one day when i tried to charge my phone, the phone was on silent mode and as usual the phone vibrated when i kept it for charge.
    After a few seconds the phone vibrated twice or thrice again when i re-inserted the cable thinking it might be loose.
    It continued to charge well when i left the room for 2 hours and finally when i returned i could see a damaged i phone 5
    lying on the floor and the phone vibrating continuously and i figured out there was a fault with the cable and the
    current wasnt flowing continuously due to which the phone continued to vibrate and fell off the shelf.
    Next day i took the iphone to Apple service centre at Saket which was closed.
    Thinking its August 15 and so the store might be closed i went back to home and waited for the next day but unfortunately could not turn up since
    i had to go to work on odd timings.
    I again went to the same service centre on 17th August 2013 and saw the service centre closed again when i tried to contact
    the other service centre and was informed about Saket's service centre already been shut down.
    There was no hoarding/ banner any kind of intimation for the customers.
    Since 18th August was Sunday and i was occupied on 19th August i went to service centre at Ansal Plaza Khel Gaon Marg on
    20th August 2013 to complaint about the Faulty Cable and the damaged caused to my iphone 5 due to the same.
    I very well explained the same to one of the person at the receiving desk at the service centre who accepted the cable
    but explained me that he doesnt have the authority to accept my iphone without permission from the technical support people
    who will be able to help me in that case and gave me the toll free number.
    i Tried to reach the toll free number and finally managed to get online with a technical support executives who too all my details and
    summary of the problem i experienced and finally kept me on hold for almost 10 minutes ormore after which he said he said that my
    case cannot be considered and while the discussion was on, the call was disconnected and i was left frustrated as i still was at the service centre
    but finally i left with no hope from Apple .
    I tried to reach again at the toll free number, and finally managed to talk to a well behaved person who assured me of considering my case and suggested
    me to go back to the service centre and advice the the person at the recieving end there to get me connected to the technical support team when i reach so that i could
    submit my phone but, since, it was already around 4:30 and the service centre was about to shut and due to traffic
    conditions all around i thought of visiting the service centre next day.
    On 21st August 2013, i went back to the service centre and spoke to the one of the store person who adviced the case to the manager Mr. Alok ( as i remember )
    who was really rude to tell me that i will have to call the technical support team on my own and then he will connect and that its not his work and all that .
    I finally connected to one of the senior technical support executives Mr.Mohamed Azharuddin K who understood my concern and spoke to the manager of the store to accept
    my iphone.
    My iphone was finally collected and i was assured i would get a call back next day from the service centre about the update.
    It was now 22nd August 2013, no update was given,no call was received, i tried to call the service centre at 12:30, they were unaware about my case and knew only about the cable and said will call me
    back very shortly.
    I called back at 2:30, still no update, at 4:30 i called back again when i was told that my case cannot be considered and i can collect my phone.
    Similar discussion was held with Mr.Mohamed Azharuddin K.
    I knew by the time i will reach the service centre would again close.
    He told me that my case cannot be considered since the cable was recieved in the dead condition and wasnt working at all unlike what i told him about the cable.
    On 23th August 2013, i went back to the service centre and collected my phone. When i asked about my old cable and told them that it was working and i wanted the technician
    to check it properly when i handed it over, they had no answer but to say its already shipped. I spoke to the manager who said that he never told any body that the cable
    was received in dead condition and he only conveyed to other authorities that the cable had fault .
    I finally dont know what to do and came back with the new cable.
    I just visited my time, petrol and parking charges in getting the cable replaced.
    If i calculated i have spent around 16 hours and 2000 worth of money in just getting the cable replaced and have a broken phone in hand.
    More than a weeks torture.
    Is that the way apple compensates for its fault ????????????????
    I will make sure that i never buy any thing from Apple and advice all the people i know to not trust Apple blindly.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • We have 2 iphone 4. Not upgraded to OSI5. We share the same Apple id to buy, etc. How can we set up the same Apple id but a diiferent icloud id and still see both iphones on find my iphone?

    My wife and I both have iPhone 4 phones. Neither of them have been upgraded to OSI 5. We share the same Apple ID to buy things, etc. We are planning to buy an iphone 4s for our daughter next month. We would all like to share the same Apple id so that we can make purchases from the same account ... that way we only fund one account. We would like to upgrade to OSI 5 and keep/share the same Apple id but be able to set up different iCloud accounts for when we sync our phones. How can we do that? One other thing, we like being able to fine our locations on the same screen (and would add our daughter) using Find My Phone. Can we still do that? Thanks in advance for your help.

    You could and should set up different iCloud accounts in "Settings > iCloud", so that every user has its own email account, calendars, reminders, notes, storage for backups and app data (files etc.), by the way everyone could also use his own account for iMessage (Settings > Messages > Send & Receive) and FaceTime (Settings > FaceTime) so that you all could write and call each other.
    Next the Apple ID for music, apps and other media: You all could just set up the ssame Apple ID in "Settings > iTunes & App Stores" for all your media purchases like songs, movies, apps etc.

  • Have photoshop 6 on a dead pc laptop with windows XP.  Have a pc laptop that has been upgraded from Vista 64 bit (where photshop wouldn't install) to windows 7 professional 32 bit (clean install).  Photoshop still won't install. Also having reinstallation

    I have photoshop 6 on a dead pc laptop with windows XP.  Have a pc laptop that has been upgraded from Vista 64 bit (where phootshop 6 wouldn't install) to windows 7 professional 32 bit (clean install).  Photoshop still won't install. Also having reinstallation issues with pse6 on this same pc.  Pse6 was installed and working on vista 64bit version of the OS, now won't install on rebuilt windows professional 7 32bit (keeps giving me serial number not valid errors).  I'm not trying to pirate these programs.  Just want to reinstall them.

    you need,
    Windows 98, Windows 2000, Windows NT 4.0 with Service Pack 4, 5, or 6a, or Windows Millennium
    Microsoft Windows 98/Millennium/2000/NT 4.0 (Service Pack 4, 5, or 6a required)

  • Build unsuccessfull product not found on the system or has been upgraded: daqmx 8.7

    I get the following error when doing a build:
    The build was unsuccessful.
    The following product(s) are not found on the system or have been upgraded:
    NI-DAQmx 8.7
    I just upgraded from LabView 8.6 to 8.61. 
    Any ideas?

    Hi Friend
    You haven't mentioned whether it is occurring while building exe or installer. And I hope this occurring when building a installer. You just try this
    Go to installer properties under category select "additional installers" and uncheck all items under the "national instruments installers to include" and then build. If its builds successfully there is no problem in your exe.
    You can make separate installer of corresponding Run time engine and Device Drivers from the labview DVD.
    This problem may happens when the installer failed to find the path of labview source distribution DVD where the Run time engine and device drivers are located.
    Regards
    Sam
    [email protected] 

  • Every image I have edited since upgrading to Lightroom 5 has been corrupted.

    Every image I have edited since upgrading to Lightroom 5 has been corrupted. First I was shooting in RAW and there was an issuw with my operating system. I upgraded to Maverick and it was supposedly fixed. Then there was an issue because LR didn't work with my camera (Nikon D90) and an update supposedly fixed that. So I finally started shooting JPEGs to try to avoid the RAW issue altogether... Now even the JPEGs say they are corrupted. I am at my wits end! Somebody please help me figure out why I can't seem to do ANYTHING anymore!

    >When I go to the files in finder, the corrupted NEFs are not able to be
    seen, but the corrupted JPEGs are!
    They don't open or do you get a blank screen when you try to open them or
    do the files not have icons? It's a good sign that your jpegs are visible
    though. That does make me think the preview database or catalog in
    Lightroom is screwed up.
    >When I try to plug the camera into the computer with a USB cord it doesn't
    recognize it
    What happens when you plug the camera in turn it on and select import
    photos in Lightroom? You should get to see the images on the camera. Try
    different USB cables if it doesn't work. Also try changing the USB mode on
    your camera. I think the old Nikons had a setting to change between PtP and
    Mass storage mode. Just changing it might make it work. This all does smell
    a little like the USB ports are bad on the computer something they should
    be able to diagnose at the Apple Store but you might want to ask about.
    On Mon, Jul 28, 2014 at 3:29 PM, MommaPotts <[email protected]>

  • Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded.  I just ran the update and it is still not fixed.  What can I do???

    Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded.  I just ran the update and it is still not fixed.  What can I do???  My plug are asking me to re-register them too.  This is annoying.  Please help!!!!!

    How do you try to start the repair dialogue? By starting Aperture or by opening the Library?
    If you not already have tried it with directly opening the library: 
    reveal your Aperture Library in the Finder
    Whilst holding down Command(⌘)- option (⌥) double click on the Aperture Library.
    Select "repair library" from the dialogue.
    What about Frank Caggiano's questions above?
    It would be really helpful to know, how many libraries you have, and if this problem is restricted to one of them.

  • Error after update : "Method 'Upgrade' does not have an implementation"

    Hello,
    After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
    Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
    from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
    PublicKeyToken=71e9bce111e9429c' does not have an implementation.
    And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
    and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
    Any idea ?
    Thanks in advance for your answer.
    Mike

    Hi Mike,
    If you are using SharePoint 2013 Server edition, please re-download the
    SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
    issue you can take a look.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
    http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
    http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
    Thanks
    Daniel Yang
    TechNet Community Support

  • I have finally been able to download I OS6 on my computer desktop.  I STILL cannot upgrade it to my iPhone 4.  I still have the 4 IOS.  Don't understand.  I was told to ask Apple

    I have finally been able to download IOS 6 on my desktop.  I STILL cannot upgrade it to my iPhone 4.

    You need to post in the developer forum.
    It is not appropriate to dicsuss unreleased sofware here.

Maybe you are looking for