Have I blown My M/B and CPU

Hi There,
    Ive got the K7N2 Delta-ILSR Motherboard with a 3200 xp 400 fsb and it looks to me like I've blown them both.
    I was installing the Thermaltake Aquarius 3 Water cooling system, I took the fan off and put the water block on the CPU but when I powered up the system the cooloing unit didn't work and my pc booted for about 2 seconds then shut itself down. Is this long enough to bugger both the board and CPU?
    The board diagnostics Lights say the CPU is damaged but when I try an old 3000xp, which I know works, in the board that doesn't work either. The system now powers up but the monitor doesn't fire up, I've tried resetting the Cmos and the Jumper to safe mode, but nothing. Any Ideas ?
Thanks,
Paul.

check all cables.
try another gfx card.
try with only 1 stick memory
set jumper j10 and j11 to safe mode and then clear cmos.
remove battery for atleast 10 mins while doing that to do a dep clear.

Similar Messages

  • Shutting down NB and CPU fans altogether with speedfan for p2p download overnight

    Hi,
    Lately I started to keep my computer on overnight for p2p downloads. Problem is, my setup is too loud, thanks to the NB fan esp. I have my computer in the same room as my bed so the smallest DB difference makes an impact on my overall sleep quality
    P2P is not a cpu challenge, so right now I am trying this:
    Have speedfan turn off both NB and CPU fan when CPU is below 45C.
    CPU temp controls both NB and CPU fan as NB readings come from a Hawai beach.
    My room is really hot, my system temp is around 40C.
    It is also possible to underclock my p4 2.4 down to 1.6ghz with Clockgen.
    When Speedfan turns off NBfan, the lights go off to so I am not disturbed in my sleep by the lights
    Now:
    Is speedfan's cpu readings dependable?? (It certainly reads different than CoreCenter)
    Is stopping the NB fan bad?? Many people even remove it, but stopping it maybe worse than throwing it away in terms of airflow?
    Anyhow would my NB warmup at all if you think it handles 200mhz fsb and my FSB will be only 133, so isn't my NB underclocked already, so it wouldn't warm up as much?
    Should I underclock my P4 to 1.6ghz so it would keep it and the NB cool even more?
    Is this a really bad idea?

    Quote
    Originally posted by hesido
    Hi,
    Lately I started to keep my computer on overnight for p2p downloads. Problem is, my setup is too loud, thanks to the NB fan esp. I have my computer in the same room as my bed so the smallest DB difference makes an impact on my overall sleep quality
    P2P is not a cpu challenge, so right now I am trying this:
    Have speedfan turn off both NB and CPU fan when CPU is below 45C.
    CPU temp controls both NB and CPU fan as NB readings come from a Hawai beach.
    My room is really hot, my system temp is around 40C.
    It is also possible to underclock my p4 2.4 down to 1.6ghz with Clockgen.
    When Speedfan turns off NBfan, the lights go off to so I am not disturbed in my sleep by the lights
    Now:
    Is speedfan's cpu readings dependable?? (It certainly reads different than CoreCenter)
    Is stopping the NB fan bad?? Many people even remove it, but stopping it maybe worse than throwing it away in terms of airflow?
    Anyhow would my NB warmup at all if you think it handles 200mhz fsb and my FSB will be only 133, so isn't my NB underclocked already, so it wouldn't warm up as much?
    Should I underclock my P4 to 1.6ghz so it would keep it and the NB cool even more?
    Is this a really bad idea?
    You may see This  
    Remember, it is even without heat sink..

  • Vcore and cpu ratio

    Hey, i have the K7N2G and i have some problems changing the vcore and cpu ratio in bios...
    my cpu is a XP 2100+, it only boots with default vcore and 1.625, and default cpu ratio... if i change the cpu ratio it doesn't boot... what's wrong? what can i do to change de vcore and cpu ratio without crashing? the max fsb that i can use is 157 (~=2050Mhz -> 157*13).
    I have OCZ-EL 256Mb

    Wonkanoby....I think you are incorrect (but not 100% sure). I have a 2100 Tbred B and I don't have to use the wire trick if I put it in the EPOX...ASUS..... The nforce2 should unlock the Tbred B core, am I mistaken here?  I also had the same problem as the above user, but I CAN get the msi to unlock it at some lower multipliers. I'm a little confused why the asus and epox nforce2 boards unlocked my chip, but the msi will not. Any ideas?

  • Need expert advice on Ram and CPU Speed

    I have read places that your Ram and CPU FSB speed should be the same to increase performance. However, I can no longer find them anymore.  Now, I just want to make sure.
    I currently have PC2700 (333Mhz) ram, but my processor is a AMD 2000+XP at 266 FSB.  Should I run my ram at 266 Mhz instead of 333 for a 1:1 ratio?  
    What do the experts think?
    Thanks everyone!

    http://qube.kylning.net/forum/attachment.php?s=&postid=23897
    If there is no picture cut and paste this into your browser
    Thats my rig water cooled thats the best for OCing (overclocking)
    But if you don't have the cash there are some good air cooled alternitaves.
     I bought a Jet 7 blower made by coolmaster
    http://www.coolermaster.com/index.php?
    LT=english&Language_s=2&url_place=product&p_serial=ACB-V83&other_title=ACB-V83JET%20[/URL]
     Then I bought a SLK-800 heatsink http://www.thermalright.com/ and pulled the Jet 7 apart and then mounted the blower on to the heatsink quite easy only 4 screws to take out and put in.
    That was quite good you could try
     http://www.thermaltake.com Tt SILENT BOOST 21dB Cheep for cooling (3400+ Although I have never seen or heard of a 3400+)
    Check out this website they have loads of good quality gear for not a bad price The only problem is it's in Swden but I think he ships over seas his site is in english and swedish I buy all my stuff there
    http://kylning.com/index.php?cPath=82_87
    http://www.kyling.com click on the english flag to get the menus in english
    let me know how it's going

  • After closing Firefox to use IE8 or any other program, everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU). Then, and only then, does everything behave normally. W

    After closing Firefox to use IE8 or any other program (like InterVideo to watch a DVD), everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU and should have closed before). Then, and only then, does everything behave normally. What is going on and what am I doing wrong or missing??
    == This happened ==
    Every time Firefox opened
    == about a couple months ago and happens every time I close Firefox.

    <u>'''Kill Application'''</u>
    In Task Manager, does firefox.exe show in the <u>'''Processes'''</u> tab?
    See: '''[http://kb.mozillazine.org/Kill_application Kill Application]'''
    '''<u>Causes and solutions for Firefox hanging at exit:</u>'''
    '''[[Firefox hangs]]'''
    '''[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit (Mozillazine article)]'''
    '''[[Firefox is already running but is not responding]]'''
    <u>'''Safe Mode'''</u>
    You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox SafeMode is a diagnostic mode that disables extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes before starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    See:
    '''[[Troubleshooting extensions and themes]]'''
    '''[[Troubleshooting plugins]]'''
    '''[[Basic Troubleshooting]]'''
    If the problem does not occur in Safe-mode then disable all of your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. You have to close and restart Firefox after each change via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
    <u>'''''Other Issues''''': to correct security/stability issues</u>
    <u>'''Update Java'''</u>: your ver. 1.6.0.19; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    ''(Windows users: Do the manual update; very easy.)''
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.

  • Memory and CPU issue

    Hi experts,
    My Oracle version is:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE 10.2.0.4.0 Production
    TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
    NLSRTL Version 10.2.0.4.0 - Production
    we have 2 node RAC. my client (WAS) connects to the DB using JDBC and establishes connection with the DB.
    Now problems is coming that my RAC memory on both the nodes gets fully consumed and CPU utilisation is also very high.
    We are using proxy login in our application connection. which means that connection to the DB will be created with a schema(User) and after that Proxy session will be established for a particular user. So for a request we have two session. The main session which we had will schema user becomes inactive and proxy session becomes active.
    So this way we have 2 sessions for a request which is not wrong but memory and CPU utilisation are bottlenecked.
    Can anyone tell what is the minimum memery that a connection takes even if its idle or inactive.
    Regards,
    Vikas

    JDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
    This means the session will continue to exist.
    It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
    'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
    by throwing memory and cpu at the problem.
    When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
    Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
    Paraphrasing William Jefferson Clinton: It's the application, stupid!
    Sybrand Bakker
    Senior Oracle DBA

  • Problem with memory usage and CPU usage

    Hello,
    i have a problem with the memory usage and cpu usage in my project!
    My application must run for more than 24 hrs. The problem is that the longer it runs the bigger is the memory and cpu usage!
    It starts with ~15% CPU usage and ~70 MBytes memory usage. After ~ 24hrs the CPU usage is ~60% and the memory usage is ~170 MBytes!
    After  3 days the CPU usage is almost about 70% and the memory usage is about 360 MBytes!
    What can I do to reduce this huge recource usage?
    Thank you!

    Hi Pahe,
       I think the issue is memory usage, since CPU usage can increase due to greater memory requirements.
       Anyway, it's difficult to debug without seeing your code, can you post it (possibly for LV 7.1 compatibility)?  Or just post a JPEG of the piece of code that can give problems...
       I guess you're appending data to an array instead of replace data elements, but I can't be sure...
       Have a nice day!
    graziano

  • Can we control user request w.r.t Memory and CPU utilization in Oracle 10g

    Dear All,
    We are having Production with Oracle 10.2.0.4 (5 Node RAC, 32Gb RAM each) running on RHEL5.2 with 12000 Users. We have some schema say FIN, HRMS, SALES, REPORT and many dedicated users for those schemas. We need to control the user request against these schema with respect to Memory (or CPU utilization)
    Suppose users using FIN schema can use Maximum 40 % of Total Memory, HRMS schema can use Max 20%, SALES can use Max 20% and REPORT can use Max 20%.
    Is it possible to create any Service in Server side to handle this type of scenareo or any existing service which can be customised to fullfil this?
    Please suggest me.......
    Thanks,
    Tusar
    Edited by: gohappy on Jan 27, 2011 5:59 AM
    Edited by: gohappy on Jan 27, 2011 6:00 AM

    JDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
    This means the session will continue to exist.
    It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
    'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
    by throwing memory and cpu at the problem.
    When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
    Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
    Paraphrasing William Jefferson Clinton: It's the application, stupid!
    Sybrand Bakker
    Senior Oracle DBA

  • Macbook Pro fan running constantly and CPU running slow

    So, I have a Macbook Pro 2010 2.3 i7 that has started running really slow and the fan is running constantly.
    In activity monitor it shows a kernel_task running constantly at around or above 200%.
    I have tried all the regular tasks.  PRam reset, SMC reset and nothing seems to fix it.
    I have also tried a system reinstall to no avail.
    Maybe I'm on the wrong track, but from what I have read, the kernel_task might be trying to slow my CPU down because it thinks it is being overworked?
    Maybe the fans are also being activated because it thinks the computer is too hot?
    Anyway, if anyone has any idea as to what I can do to figure out what is going on, let me know.  Thanks

    Here is the EtreCheck results:
    Problem description:
    fans running constantly and CPU slowing down
    EtreCheck version: 2.2 (132)
    Report generated 4/28/15 7:42 AM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    The following internal tasks failed to complete:
    /usr/sbin/system_profiler -xml SPFontsDataType
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.66 GHz Intel Core i7 CPU: 2-core
        8 GB RAM
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 141 - SN = W0020PTD7BWZA
    Video Information: ℹ️
        Intel HD Graphics - VRAM: 288 MB
        NVIDIA GeForce GT 330M - VRAM: 512 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.8.5 (12F45) - Time since boot: 0:39:23
    Disk Information: ℹ️
        TOSHIBA MK5065GSXF disk0 : (500.11 GB)
            disk0s1 (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (73.74 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/KeyRemap4MacBook.app
        [loaded]    org.pqrs.driver.KeyRemap4MacBook (8.4.0 - SDK 10.8) [Click for support]
            /Applications/Roxio Toast 6 Titanium/Toast 6 Titanium.app
        [not loaded]    com.roxio.TDIXController (1.3) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.IKMultimedia.driver.StompIO1 (1.0.0) [Click for support]
        [not loaded]    com.avid.usb.mbox.driver (1.0.18) [Click for support]
        [not loaded]    com.digidesign.fwfamily.driver (9.0f4) [Click for support]
        [loaded]    com.digidesign.iokit.DigiDal (10.3.4f181 - SDK 10.6) [Click for support]
        [not loaded]    com.digidesign.usb.elevenrack.driver (1.0.1) [Click for support]
        [not loaded]    com.ikmultimedia.driver.StealthPedal (1.0.0) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Click for support]
        [not loaded]    jp.co.roland.RDUSB0138Dev (1.0.0 - SDK 10.6) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Click for support]
    Startup Items: ℹ️
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        RDUSB0138Startup: Path: /Library/StartupItems/RDUSB0138Startup
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.avid.mbox.helper.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [unknown]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    org.pqrs.KeyRemap4MacBook.server.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [running]    com.digidesign.elevenrack.helper.plist [Click for support]
        [running]    com.digidesign.fwfamily.heler.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [unknown]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.paceap.eden.licensed.plist [Click for support]
        [loaded]    org.pqrs.KeyRemap4MacBook.load.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Login Items: ℹ️
        Dropbox    Application  (/Applications/Dropbox.app)
        apple-scc-20150427-140055    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        iLokClientHelper: Version: 3.5 - SDK 10.5 [Click for support]
        Silverlight: Version: 4.0.60831.0 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.1
        googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        AdobePDFViewer: Version: 10.1.1 [Click for support]
        JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
    Audio Plug-ins: ℹ️
        Avid CoreAudio: Version: 10.3.4.181 - SDK 10.6 [Click for support]
    3rd Party Preference Panes: ℹ️
        Digidesign Eleven Rack  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Mbox  [Click for support]
        RC-300  [Click for support]
    Time Machine: ℹ️
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 499.25 GB Disk used: 425.51 GB
        Destinations:
            Shupester [Network]
            Total size: 3.00 TB
            Total number of backups: 66
            Oldest backup: 2013-06-17 21:18:22 +0000
            Last backup: 2015-03-19 06:26:07 +0000
            Size of backup disk: Excellent
                Backup size 3.00 TB > (Disk size 499.25 GB X 3)
        /sbin excluded from backup!
        /usr excluded from backup!
        /System excluded from backup!
        /bin excluded from backup!
        /private excluded from backup!
        /Library excluded from backup!
        /Applications excluded from backup!
    Top Processes by CPU: ℹ️
            31%    mtmd
            19%    Safari
             8%    Finder
             6%    mds
             4%    Dropbox
    Top Processes by Memory: ℹ️
        180 MB    Mail
        172 MB    mds
        139 MB    Safari
        131 MB    WebProcess
        106 MB    Pages
    Virtual Memory Information: ℹ️
        4.72 GB    Free RAM
        3.28 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        Apr 28, 2015, 06:53:27 AM    Self test - passed
        Apr 27, 2015, 11:34:56 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pro Tools_2015-04-27-113456_[redacted].crash
        Apr 27, 2015, 11:34:23 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pro Tools_2015-04-27-113423_[redacted].crash

  • A process named "update.exe *32" and description is "Firefox" keeps using a lot of memory and cpu; the longer forefox is on, the worse it gets. How to prevent?

    using Windows 7, firefox 15.0.1
    This process uses more and more memory and CPU, sometimes there are several of these processes running. If I kill these processes, it doesn't seem to affect the utilization of Firefox. Then the process slowly starts to use more and more memory and CPU all over again.
    This happens all the time, every time I use Firefox.

    I do not have a ComObjects folder under C:\Program Files (x86)\Common Files. That is not part of Firefox.
    wscript.exe is a utility included with Windows to run scripts at the system level. It generally is not used by major programs. If update.exe is starting up with Windows, you may be able to find the script that wscript.exe is running using [http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx Autoruns].
    It definitely sounds viral. I suggest deleting the update.exe file, although Windows might prevent you from doing that until you kill all related processes. And if you have a persistent infection, the file may be restored or re-downloaded.
    It might be easiest to seek assistance from a forum more dedicated to malware cleanups such as the following:
    * [http://www.bleepingcomputer.com/forums/forum22.html Virus, Trojan, Spyware, and Malware Removal Logs - BleepingComputer.com]
    * [http://forums.majorgeeks.com/forumdisplay.php?f=35 Malware Removal - MajorGeeks Support Forums]
    Hope you get it removed.

  • CreateRow increases memory and cpu. Tomcat+ADF Faces+BC4J in JDev 10.1.3.0

    CreateRow increases memory and cpu. Tomcat+ADF Faces+BC4J in JDev 10.1.3.0.4
    My old problem is this Ineffectiveness/Inconsistency BC4J createrow in tomcat, CPU = 100%,Mem=2.2G
    I have tested my Adf Faces application with jmx in server and, in my machine, jconsole and mc4j.
    When cpu=100% and memory increases, jconsole constantly returned similar trace:
    In all trace, I see that common is:
    oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2203)
    oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
    Therefore, I believe that function populateRow make infinity loop (or fuction fech make infinity loop, called populateRow), but I don’t know populteRow or fetch code.
    tomcat Version: 5.5.16
    Jdeveloper Version: 10.1.3.0.4
    Adf Business component Version: 10.1.3.36.73
    Java version: 1.5.0_05
    Please, any oracle ACE could help me?
    When cpu=100% and memory increases, jconsole constantly returned any of these trace:
    First trace
    java.net.SocketOutputStream.socketWrite0(Native Method)
    java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
    java.net.SocketOutputStream.write(SocketOutputStream.java:136)
    oracle.net.ns.DataPacket.send(Unknown Source)
    oracle.net.ns.NetOutputStream.flush(Unknown Source)
    oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
    oracle.net.ns.NetInputStream.read(Unknown Source)
    oracle.net.ns.NetInputStream.read(Unknown Source)
    oracle.net.ns.NetInputStream.read(Unknown Source)
    oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:979)
    oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:951)
    oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:448)
    oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
    oracle.jdbc.driver.T4CPreparedStatement.fetch(T4CPreparedStatement.java:692)
    oracle.jdbc.driver.OracleResultSetImpl.close_or_fetch_from_next(OracleResultSetImpl.java:258)
    oracle.jdbc.driver.OracleResultSetImpl.next(OracleResultSetImpl.java:193)
    oracle.jbo.server.QueryCollection.hasNextInResultSet(QueryCollection.java:3014)
    oracle.jbo.server.ViewObjectImpl.hasNextForCollection(ViewObjectImpl.java:3650)
    oracle.jbo.server.QueryCollection.hasNext(QueryCollection.java:2992)
    oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2207)
    oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
    oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2612)
    oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
    oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
    oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:4960)
    oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:1901)
    oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:1891)
    oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:6555)
    com.samesi.segestion.view.backing.app.Clientes.devoluciones_action(Clientes.java:1845)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
    com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
    oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
    oracle.adf.view.faces.component.UIXCollection.broadcast(UIXCollection.java:94)
    oracle.adf.view.faces.component.UIXTable.broadcast(UIXTable.java:205)
    javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
    javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
    com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
    javax.faces.webapp.FacesServlet._service_79(FacesServlet.java:197)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
    oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
    org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
    org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
    org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
    org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
    org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
    org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
    org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
    org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
    java.lang.Thread.run(Thread.java:595)
    Second trace
    java.net.SocketInputStream.socketRead0(Native Method)
    java.net.SocketInputStream.read(SocketInputStream.java:129)
    oracle.net.ns.Packet.receive(Unknown Source)
    oracle.net.ns.DataPacket.receive(Unknown Source)
    oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
    oracle.net.ns.NetInputStream.read(Unknown Source)
    oracle.net.ns.NetInputStream.read(Unknown Source)
    oracle.net.ns.NetInputStream.read(Unknown Source)
    oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:979)
    oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:951)
    oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:448)
    oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
    oracle.jdbc.driver.T4CPreparedStatement.fetch(T4CPreparedStatement.java:692)
    oracle.jdbc.driver.OracleResultSetImpl.close_or_fetch_from_next(OracleResultSetImpl.java:258)
    oracle.jdbc.driver.OracleResultSetImpl.next(OracleResultSetImpl.java:193)
    oracle.jbo.server.QueryCollection.hasNextInResultSet(QueryCollection.java:3014)
    oracle.jbo.server.ViewObjectImpl.hasNextForCollection(ViewObjectImpl.java:3650)
    oracle.jbo.server.QueryCollection.hasNext(QueryCollection.java:2992)
    oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2207)
    oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
    oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2612)
    oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
    oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
    oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:4960)
    oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:1901)
    oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:1891)
    oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:6555)
    com.samesi.segestion.view.backing.app.Clientes.devoluciones_action(Clientes.java:1845)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
    com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
    oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
    oracle.adf.view.faces.component.UIXCollection.broadcast(UIXCollection.java:94)
    oracle.adf.view.faces.component.UIXTable.broadcast(UIXTable.java:205)
    javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
    javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
    com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
    javax.faces.webapp.FacesServlet._service_79(FacesServlet.java:197)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
    oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
    org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
    org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
    org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
    org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
    org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
    org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
    org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
    org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
    java.lang.Thread.run(Thread.java:595)
    Third trace
    java.lang.System.arraycopy(Native Method)
    com.sun.java.util.collections.ArrayList.toArray(ArrayList.java:287)
    oracle.jbo.server.ViewDefImpl.getEntityReferences(ViewDefImpl.java:547)
    oracle.jbo.server.ViewRowStorage.entityCacheAdd(ViewRowStorage.java:1730)
    oracle.jbo.server.ViewRowImpl.entityCacheAdd(ViewRowImpl.java:2151)
    oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1070)
    oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:2943)
    oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2841)
    oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2203)
    oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
    oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2594)
    oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
    oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
    oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:4960)
    oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:1901)
    oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:1891)
    oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:6555)
    com.samesi.segestion.view.backing.app.Clientes.devoluciones_action(Clientes.java:1845)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
    com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
    oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
    oracle.adf.view.faces.component.UIXCollection.broadcast(UIXCollection.java:94)
    oracle.adf.view.faces.component.UIXTable.broadcast(UIXTable.java:205)
    javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
    javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
    com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
    javax.faces.webapp.FacesServlet._service_79(FacesServlet.java:197)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
    oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
    org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
    org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
    org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
    org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
    org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
    org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
    org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
    org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
    java.lang.Thread.run(Thread.java:595)
    Fourth (and end) trace
    oracle.sql.NUMBER.toBigDecimal(NUMBER.java:715)
    oracle.sql.NUMBER.bigDecimalValue(NUMBER.java:2080)
    oracle.jbo.domain.Number.bigDecimalValue(Number.java:551)
    oracle.jbo.domain.Number.hashCode(Number.java:431)
    oracle.jbo.Key.hashCode(Key.java:384)
    oracle.jbo.common.WeakHashtableImpl.get(WeakHashtableImpl.java:195)
    oracle.jbo.common.WeakHashtable.get(WeakHashtable.java:98)
    oracle.jbo.server.EntityCache.add(EntityCache.java:327)
    oracle.jbo.server.ViewRowStorage.entityCacheAdd(ViewRowStorage.java:1762)
    oracle.jbo.server.ViewRowImpl.entityCacheAdd(ViewRowImpl.java:2151)
    oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1070)
    oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:2943)
    oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2841)
    oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2203)
    oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
    oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2594)
    oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
    oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
    oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:4960)
    oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:1901)
    oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:1891)
    oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:6555)
    com.samesi.segestion.view.backing.app.Clientes.devoluciones_action(Clientes.java:1845)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
    com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
    oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
    oracle.adf.view.faces.component.UIXCollection.broadcast(UIXCollection.java:94)
    oracle.adf.view.faces.component.UIXTable.broadcast(UIXTable.java:205)
    javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
    javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
    com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
    javax.faces.webapp.FacesServlet._service_79(FacesServlet.java:197)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
    oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
    org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
    org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
    org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
    org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
    org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
    org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
    org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
    org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
    java.lang.Thread.run(Thread.java:595)Tranks,

    I continued researching. When my server gain cpu and memory in Catalina.out, I can to see this output:
    Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache encodeBegin
    INFO: fragment is Facturacion.jspx:_id3
    Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache getFragmentFromCache
    INFO: fragment (Facturacion.jspx:_id3) fetch: cache miss
    Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache insertFragmentInCache
    INFO: fragment (Facturacion.jspx:_id3) insert: cached for 864000 secs
    Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache encodeBegin
    INFO: fragment is Facturacion.jspx:_id4
    Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache getFragmentFromCache
    INFO: fragment (Facturacion.jspx:_id4) fetch: cache missIn this example, I belive that user is resuming the Facturacion.jspx page. In my code I have this line:
    It’s corresponding to menu.
    I have looking this documentation:
    http://download.oracle.com/docs/html/B25947_01/web_cache002.htm
    In this documentation, first access, the cache miss, but the following times the cache could hit. . When my server gain cpu and memory I look that the following times the cache always miss in all pages. Subsequently tomcat no reply and the malicious thread, execute Armageddon trace. This behavior of the cache is strange, right?
    I’m sure that I’m making anything that fetch in queryCollection make big loop.
    I have redefining getRangeSize and CurrentRow of my CustomViewObject (all viewOjects about my applications extends CustomViewObject and CustomViewObject extends viewObject) and I looked correct rangesize (not -1). I got system.out.println(getFetchedRowCount()) in createRow and obtain 13 or 15. I belive that It’s correct.
    Another example of problematic trace is (in this case is in preparemodel):
    com.sun.java.util.collections.ArrayList.indexOf(ArrayList.java:201)
    com.sun.java.util.collections.ArrayList.contains(ArrayList.java:183)
    oracle.jbo.server.ViewRowCache.addWithCheck(ViewRowCache.java:351)
    oracle.jbo.server.ViewRowCache.add(ViewRowCache.java:409)
    oracle.jbo.server.QueryCollection.addRowToColl(QueryCollection.java:2069)
    oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2111)
    oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
    oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2612)
    oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
    oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
    oracle.jbo.server.ViewRowSetIteratorImpl.getRangeSize(ViewRowSetIteratorImpl.java:627)
    oracle.jbo.server.ViewRowSetImpl.getRangeSize(ViewRowSetImpl.java:2251)
    oracle.jbo.server.ViewObjectImpl.getRangeSize(ViewObjectImpl.java:6065)
    oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1549)
    oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1420)
    oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1403)
    oracle.adf.model.binding.DCIteratorBinding.setRangeSize(DCIteratorBinding.java:2641)
    oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:2484)
    oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2257)
    oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:104)
    com.samesi.segestion.view.frameworkExt.SegestionPageLifecycle.prepareModel(SegestionPageLifecycle.java:354)
    oracle.adf.controller.v2.lifecycle.Lifecycle$8.execute(Lifecycle.java:210)
    oracle.adf.controller.v2.lifecycle.Lifecycle.executePhase(Lifecycle.java:116)
    oracle.adf.controller.faces.lifecycle.ADFPhaseListener.mav$executePhase(ADFPhaseListener.java)
    oracle.adf.controller.faces.lifecycle.ADFPhaseListener$4.after(ADFPhaseListener.java:331)
    oracle.adf.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:97)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:254)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
    oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
    oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
    org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
    org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
    org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
    org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
    org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
    org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
    org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
    org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
    java.lang.Thread.run(Thread.java:595)Thanks,

  • PS and CPU fan comes on merely by plugging in AC power

    I am repairing a friends Athlon xp machine and have tested everything with extras.
    I put a new MSI KM4M-V board in.  The pc runs xp fine, etc., etc., however, when shut down the pc, Windows shuts down, but the ps and cpu fan stays on.  Indefinitely.  I have to either flip the on/off switch on the back of the ps or pull the damn plug.
    What gives?
    When I plug the thing in cold, same thing; the fans come on and then I press the start button whenever I want and the system posts and boots normally.
    A motherboard Short?  I checked the switch and even pulled the connector; the fans still come on when I plug it in.
    Any thoughts?
    Thanks.
    J Romulus

    Yes, I've let it run for hours after Windows shuts off, it simply doesn't go off.
    Simply plugging it in or flipping ps switch, the same thing; ps and cpu fans come on automatically.
    I've read all the APIC threads; if I were strictly having problems shutting down, maybe it be that.  But it is so strange that it does it from a cold start.
    Got to be some kind of short, or else a bad board.

  • I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

    I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

    I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1.  Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
    2.  Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly.  There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
    3.  Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • What is the CPU usage of X and cpu temp on your Arch?

    I just installed the new arch 2009 02. Everything seems to be perfectly out of box, I have lxde DE.
    But I noticed that in idle X is using around 2~3% cpu compared to below 1% in the old Arch I had before. It seems there is a little lag in the desktop experience, not obvious though, but not as responsive as my old Arch. Also the cpu temperature under lm_sensors gives me 43 constantly compared to 39 in my old Arch?! This is not some random sample of temperature, I constantly monitored it to realize it indeed runs hotter.
    Also, when I open one mplayer, it uses 40% cpu + 20% for X. If I open 2 mplayer, fan will go noisy and cpu hit full and both videos become choppy! This never happened in my old Arch. I search the forum for quite a while, but have not found exactly the reason.
    Some help or information? Greatly appreciate it.:D
    My Hardware:
    Shuttle XPC sn68sg2
    Athlon x2 5200+ 2.7Ghz
    Corsior 2G Ram
    Asus Nvidia Geforce 7600GS
    WD 250G x2
    Last edited by yingwuzhao (2009-02-21 20:57:51)

    Hmm interesting.  How old was the "old arch" you are talking about?
    Because if it was quite a while ago that you ran Arch and recorded those temperature readings, I might wonder if your hardware is aging or dust is gathering inside your computer case, decreasing air flow and increasing temperature.
    My laptop also runs almost constantly around 43 degrees and about the same at X idle.  This seems normal to me though.
    Last edited by CheesyBeef (2009-02-21 21:12:13)

  • Firefox 3.6.24 is stressing memory and CPU resources to the point that Hotmail is almost unusuable and computer jams while FF goes thru its athletics; what to do?

    I have a Dell Inspiron 710m, with Windows XP, Norton 360, IE8. My computer understanding and needs are simple. Norton lets me know that Firefox is eating memory and CPU. The machine often jams while this happens, whether or not Norton has flagged an operation, and then resumes function. Hotmail is in shambles (jamming between operations, and having sign out problem). Neither Norton nor CC Cleaner (including Registry) indicate a problem. This is a nifty little machine that I use for email, mostly newspaper subscriptions, online shopping and banking, personal, and for Internet research. I have tried more advanced versions of Firefox and found them buggy. So, I went back. The upgrades are coming too fast. Not everyone is going to invest in another machine for Windows 7 or IE 9 capability right away. Meanwhile, Firefox, which worked just fine, seems to be pushing along, in what seems to be an industry in which cooperation and compatibility have ceased to be important. I don't know what to do. I can't do complex diagnostics and fixes, and am not in an area where I would take this computer anywhere.

    Thank you for taking the time out to reply. I don't know whether or not your suggestions would have worked, but I did solve my problem. I eventually figured out that the file, overlay.xul, was doing something and when I changed the filename, the bar went away.
    I was reading that the xul error usually meant something wrong with an extension, but that didn't make sense because after uninstalling/reinstalling, there were no extensions present, on an assumption, of course. I noticed a file through a search, and it was located in a folder without a mozilla/firefox name in it, looked like a randomly generated folder name. I looked in the extensions. ini and noticed it pointed to that overlay.xul file in that random named folder and thought, what the hell, and just renamed the overlay.xul file to something else and the problem went away.
    Thanks again.

Maybe you are looking for

  • Adding phone file format

    in cm6 i was able to add group of phones using the builtin excel and export to csv on bat. i noticed that the csv text file can be seen on ADD FILE FORMAT with the FORMAT FILE NAME HAVING 2 options (default and simple) i didnt do anything on this but

  • About Retail & Modules Related to Retail

    Hi Experts,   I am new to Retails, I need information regarding Modules involved in Retail  & Landscape ( Compatibility with BI Analytics )  . Thanks, Swap

  • 9th day of the line training period - Router now c...

    Hi, I'm on the 9th day of the line training period. My router is now configured to 13.5 Mb but download still very very slow. Please see the stats and if anyone can advise what should I do. Thanks. I'm unable to perform a speed test as it fails. DSL

  • ItemDetails WD Java - External Validation

    Hi, Has anyone used WD JAVA External Validation with Taxonomy table? Everything is ok with plain tables, but when I assign WdCompsUserExits to ItemDetails Component connected with taxonomy table, I have an error: "Illegal field [Parent] found in XSD

  • Cat'n install activex debug flash player

    Just now I downloaded this installer: http://download.macromedia.com/pub/flashplayer/updaters/10/flashplayer_10_ax_debug.exe Then I try to install flash player with it and get this error: The version of Adobe Flash Player ActiveX that you are trying