Have I set some parameter in Premiere Pro that has removed my audio on some videos?

I recently installed Premiere Pro CC as a trial. I started learning to use the program with a particular clip with a .mpg extension. At first, sound was not an issue, but now, suddenly I have no sound with this clip, and when I play clip on this computer outside Premiere Pro, it no longer plays with sound. When I play the clip on another computer, sound is no problem. Additionally other .mpg clips no longer have sound.
I have DL'd and installed the K-lite codecs to no avail. Other sounds, mp3s, computer prompt sounds, all work no problem, but not these particular .mpg files. Any suggestions, please? Thank you.

Enclosed are the data -
I did clear Media Cache Database
I am playing the clips in the source monitor and the program monitor
Something fundamental has changed - the clip will no longer provide audio within PP, or outside when played by any media player including VLC, Irfan, and Winamp. The same clip removed to another machine plays with no problems.
I have removed K-lite and cleaned the registry
Thank you for your help.

Similar Messages

I have a 2010 vintage 13-inch MacBook Pro that has a 60 watt power adapter. I also have an older power adapter that is 65 watts. Is it okat to use the 65 watt with this MacBook Pro?

I have a 2010 vintage 13-inch MacBook Pro that has a 60 watt power adapter. I also have an older power adapter that is 65 watts. Is it okat to use the 65 watt with this MacBook Pro?

yes.
"For instance If you have a MacBook (13-inch Late 2009) that normally uses a 60W adapter, you can also use an 85W adapter with that computer. You would not use a 45W adapter with that computer; it would not provide enough power for that MacBook. Using an adapter of higher wattage than the adapter that came with the computer will not cause the computer to charge more quickly or otherwise operate any differently than using the adapter that came with the computer. "
http://support.apple.com/kb/HT2346

Hey guys i have a problem by installing Adobe Premiere Pro Cs4.

Hey guys i have a problem by installing Adobe Premiere Pro Cs4. I am german and 14 years so sorry for by bad english... I downoadet the setup, installed all the software, but when i wanted to run it the first time, adobe sayd: You have to estart your computer, if hat doesnt work ask our support...mistake (dont know what the right word for mistake code is) code is 131:4, now i hope that you can help me by installing the software in the right way!
I hope you can help me...

Na was für'n Computer? Hast du den Neustart auch wirklich gemacht? Warum CS4? Klingt einfach so, als ob du das Ganze mit unzureichenden Benutzerrechten gemacht hast und somit die Installation nie richtig fertig wird...
Mylenium

I'm have problems Importing with the Adobe Premiere Pro (original version upgrade

Hi all. I’m having a similar problem that I've seen posted on here but I have Adobe Premiere Pro (the first version upgrade.) I upgraded it from Premiere 5.0. Every time I try to import some Mpeg files to edit, it freezes up and crashes. I’m wondering if someone could help me. My computer specs are below:
(1) Mini-Tower mATX Chassis w/300W PS 865G Motherboard
(1) Windows XP Professional Edition with Service Pack 2
(1) Intel Pentium 4 Processor 3.2 GHz 512K 800FSB w/ HT
(1) DDR333 PC2700 Non-ECC Memory sticks (512MB x 2 and two one gigs)
(1) 120GB Ultra ATA (7200rpm) Hard Drive
(1) GeForce 4 Ti4200-8x 128MB AGP Card w/ TV-Out
Thanks,
Peter
[email protected]

Thank you Eddy. I appreciate all the help and feedback I get from the website.
Also, someone suggested I convert the Mpegs to AVI files first. What do you know about AVS Video Remaker download to use to convert it???
Thanks and Regards,
Peter Adija
Office: (704) 631-5418
Cell: (704) 315-4946
Date: Mon, 8 Jun 2009 15:20:10 -0600
From: [email protected]
To: [email protected]
Subject: I'm have problems Importing with the Adobe Premiere Pro (original version upgrade
Welcome to the forums.
Thanks for providing some of your hardware details.
Please provide http://ppro.wikia.com/wiki/Troubleshooting to help us help you.
Cheers
Eddie
>

Am I able to get Adobe Encore if I have a single app subscription with Premiere Pro CC

I have a single app subscription for Premiere Pro CC 2014 and I wanted to author a Blu Ray disc. Am I able to use Adobe Encore with this subscription? It seems I keep getting this dialogue box when trying to start up Encore: Adobe Encore Cs6 cannot run in trial mode. Please relaunch the application and provide a valid serial number.

If you installed Encore from the Premiere Pro previous version options, then see this:
If Encore CS6 in cloud install asks for serial number:
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

How do I set poster frame in Premiere Pro?

Does anyone know how to set poster frame in Premiere Pro? Wasted hours trying to figure this out and reading all forum threads and sadly still to no avail. Any help much appreciated.

thanks at JSS1138 for this and that appears to enable me to select 'set poster frame' (albeit it not on static images). However, when I export the video the (supposedly now) set poster frame still does not appear as the preview image. Any ideas on this?

Good morning I have problems to activate my adobe premiere pro

good morning I have problems to activate my adobe premiere pro is very urgent help me
how long is the wait ... I have to do an edition for within two days ... I'm in trouble ...

Hi juanpablo,
Try this:
Premiere Pro CC: Help > Sign In
Premiere Pro CS6: Help > Activate
If that is not working for you, let us know any error messages or more info that can help us understand your problem better.
Thanks,
Kevin

Odd ProRes sequence set-up behavior in Premiere Pro CC

When I create a new sequence by dragging a ProRes HQ file onto New Item icon, it creates a DNxHD sequence. My ProRes HQ footage is captured by the Blackmagic Shuttle2 recorder, and MediaInfo verifies it is ProRes. Yet the sequence settings in Premiere Pro CC show:
Editing Mode: DNX 145 1080i
Video Previews box:
Preview File Format: DNX 145 1080i 59.94
Codec: DNxHD
I am on a Mac with Quicktime 7 installed. There is no problem ingesting and importing the ProRes HQ camera video files into Premiere Pro. I am just not seeing a ProRes sequence being created. Is there something else I should test for?
Thanks.

No, sadly.
I went into great deal about it here: http://forums.adobe.com/message/5457995#5457995 , and here :http://forums.creativecow.net/readpost/3/942978 ; it seems to be a 'well known' bug?
I can work around the sequence not matching the clip properties, but I want the export settings to match the clip properties (which is why I wanted the sequence settings to match the clip properties; because then I can do an export using sequence settings). I can't do that now unless I do it manually....anyway, see my first link above for the details.
Thanks!
~Michael

Does adobe Premiere Pro CC edit and export 4k and higher video resolutions?

Hey Guys I am new the forum but have been using adobe products for years. I am having some problems finding if Adobe Premiere Pro CC effectively lets you edit and export video at 4k and higher. I am having a custom built computer to specifically handle high resolution output and video editing. I have a 5k monitor to go with it as we;;. Long story short is I need to make sure I can edit and export at full resolution. I am not interested in compressing the video output to 1080P from a 4k video input source. It would be a shame if I have to learn a completely new software program for my business because I have loved previous versions of the adobe premiere pro. any help with this would be greatly appreciated. I am expected to get my custom build back this afternoon. Thanks in advance for any help provided!

Yes

Premiere Pro CS5.0.4 -Will not play any video- reinstall didn't help

here's my system info -
Model: MacPro5,1, BootROM MP51.007F.B03, 4 processors, Quad-Core Intel Xeon, 3.2 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
   ----------------I only use one monitor, 1920x1200, 32bit color depth
   ------------------No Capture Card, No Sound Card or I/O box
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: TSSTcorp CDDVDW SH-222AL
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
---------- This 2tb Hitachi is my data drive - there are 600GB free (33%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 223.57 GB
   ---------This 250gb SSD drive is my system/application drive - 120GB free (50%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 111.79 GB
------------this 125GB SSD I use as a project-specific drive to serve up video very quickly when i'm generating Video material using the software VDMX
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd300000 / 2
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd320000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, Up to 800 Mb/sec
i've been using Premiere Pro for about a year and a half with no trouble, no crashes that i can remember.   I updated to 5.0.4 when it came out and experienced no problems.
I have not made any changes to my system (drivers, programs, etc.) since the last time i worked with Premiere Pro with no trouble. The only difference is that i generated approx. 52GB of new video files (mov. uncompressed 32bit 640x480 resolution) that i was beginning to edit in to a music video.
My current problem is:: there is absolutely no playback of video in 5.0.4.   not in the tiny project window preview, not in the source preview, and not in the timeline/canvas window.   when i push PLAY, the button turns into a square STOP button, but nothing happens.   this is independent of project or file type. The project i was working on when playback stopped is using uncompressed 640x480 32bit Quicktime files and one 44khz/16bit .AIFF file.   as a quick doublecheck, I just added a 640x480 Apple Intermediate Codec file and it also will not play back.   I opened older projects and none of them will playback.
My problem started while i was working on a project. I was working on the project for probably an hour and a half with no trouble. Then it seemed to get a bit sluggish and i could hear the HD churning a little more.   After rendering out a short section (just under 10 seconds), PPro did not play back the just rendered (now greenline) section. Immediate playback of rendered material was the default behavior, and this was the first time ever that the just rendered section did not play back.   I then discovered that no video would play back at all--in any of the windows.   I can scrub through all the video without any trouble--all the frames are there.
I shut down PPro, & restarted. No change.   I restarted my computer. No change.
Realizing that the problem was likely related to a lack of space on my data drive, i deleted approx. 500GB of files off my 2 TB drive, leaving just under a 1/3 of it free. i checked the drive for errors, and defragmented it. Premiere Pro still wouldn't play any file from any project.
The files are fine, they will playback anywhere else (several different file types involved in different projects). The files are compatible with Premiere Pro (uncompressed VGA resolution Quicktime .mov), i was editing on the timeline with them for hours before all video playback stopped.   All other Adobe programs (After Effects, Photoshop work fine).
I tried to find an answer/solution on these forums, unsuccessfully.   After uninstalling PPro and reinstall (did not help), and entire Suite uninstall, Adobe Clean, and reinstall, neither version 5.0.0 or 5.0.4 will play video --the no playback problem has persisted.
I was running out of HD space --i had less room than i thought -- down to about 7% of free space, a bone-headed move on my part. I'm not surprised that playback performance got compromised due to lack of space.   But i'm shocked that the problem is persisting.   Fortunately, i had just backed up my entire system the day before. (i've backed up many times before and this never affected PPro performance)
i tried to "CLEAN" the media cache for the sequence but it had no effect (in searching the forums, i saw somebody else have their 'crashing Premiere Pro' problem solved by hitting this button). I just took a look in the user/application support/adobe/common/5.0 to look at the "Media Cache" folder and the "Media Cache Files" folder.   Neither of them are empty, even after hitting the CLEAN cache button in the main preferences 'Media' settings window.   I don't know if this is the correct behavior or not.   (i'd expect a "clean" command to empty the folder, but i'm not the programmer)
This does not appear to be the ATI/5.0 problem that so many Mac users suffered (i was lucky to never have that problem).    Again, i've never had any problems with Premiere Pro over the last year and a half, until working on this latest project with the Hard Drive very low on space.   I'm 99.9% positive that's at the heart of the issue.
I don't understand why a clean reinstall did not help in this regard. The problem is clearly PPro specific.   I found one topic in the forum where someone else experienced this same "no video playback" problem, but there was never follow-up from the user saying whether or not his problem was solved (or what was done to correct the problem).
I'd love to get some help--- seems to be a very rare issue, but right now, i can do no video editing. btw, i started a new project as well and imported a .mov file -- same problem, no video playback.
the weird thing is that i can actually still edit video. i just rearranged my timeline assets and rendered out a minute-long quicktime (Apple Intermediate Codec) .mov and it looks and plays as it should.    This is really weird. I'm baffled -- there must be some way to fix this.   I don't want to have to go back to Final Cut, certainly not when i've already paid for Create Suite 5 Production Premium and EVERYTHING works except for video playback in PrPro.
thanks in advance for your help
Message was edited by: magneticjak
Message was edited by: magneticjak

hello.   hey, thanks very much for writing back. i got some good info with a search or two. (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs, OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
from User /Preferences/Adobe:
com.adobe.AdobePremierePro.plist
com.Adobe.Premiere Pro.5.0.plist
and from System Preferences:
the file: Adobe Premiere Pro Prefs
and..
/.../Premiere Pro/5.0/...
AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
Debug Database.txt
Placeholder Preset.epr
PostEncodeCmds.pref
PresetCache.xml
Trace Database.txt
NOTE:
of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but... it seems to have worked.
I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering, so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
happy editing,
peace

Premiere Pro CC has no audio on imported MPEG2

So I just recently upgraded to the Creative Cloud, running Premire Pro CC about half of my workflow consists of editing Mpeg2 transport stream files.
After pushing a few projects through using other formats, I decided to drop one of my run of the mill mpeg2 files on a timeline. however the audio tracks show a straight line - no visible waveform.
I have pushed these same type of files (as well as some of the exact same files) through premiere pro CS5.5 and Premiere Pro CS4 with no issues at all.
I have dropped multiple other file types on the same sequence to double check that my project settings are not the issue, avchd, prores, vob, mp4, mp3, all play fine.
premiere pro CC DOES, however, see audio from an Mpeg 2 file created in media encoder, ( for this test I exported from a sequence comprised of prores and avchd files)
Also, the Mpeg 2 files which do not have audio on my premiere pro CC sequence can be played back WITH audio through vlc media player.
Thank you for any help with this problem!

it happened to me with mp4 clips. if you mean like this one
it is a an Adobe problem it even happened to media encoder. the clip is playable with any player app even I've tested it with other video production app & it works fine. so if you want to fix it temporary & fast without converting, get QuickTime pro to open the wanted clip then save the clip by QuickTime (save as) in another folder (don't change settings). in premiere pro just right click on the not working clip then choose (replace footage) with one you saved by QuickTime, voila!. if it doesn't work the clip might be broken or it need to be converted.
by the way I'm a windows 8.1 user

Premiere Pro CS5 crash when adjusting audio gain

Premiere Pro CS5 crash when adjusting audio gain
The same on another workstations.
Have any idea?

Hi Dennis,
I just had a go and can reproduce the problem straight away too.
Created a new project then a new XDCAM EX 1080p25 sequence. Imported a short Sony PMW-350 clip. Dragging it straight to the timeline and then setting audio gain is OK (Source channel mapping preferences set to mono).
However, if I Modify - Audio Channels and then set track format as stereo or mono as stereo and then drag the clip to the timeline and right click - gain, Premiere crashes about 1/2 to 1 second after the audio gain dialogue box appears. Error log below if it's useful.
Asus Rampage III extreme
Intel i7 980x @ 3.33GHz
24Gb ram
Windows 7 64 bit
Using onboard sound - Realtek HD 6.0.1.6037
Incidentally, I tried with both the default Windows 7 audio drivers and then the Realtek HD drivers installed (I'd previously forgotten to install the Realtek driver when I built the PC)
Log Name:      Application
Source:        Application Error
Date:          12/08/2010 14:28:51
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
Faulting application name: Adobe Premiere Pro.exe, version: 5.0.1.0, time stamp: 0x4bf119d2
Faulting module name: MSVCR90.dll, version: 9.0.30729.4926, time stamp: 0x4a1750b0
Exception code: 0xc0000005
Fault offset: 0x000000000001dfcd
Faulting process id: 0x16ec
Faulting application start time: 0x01cb3a21ad8357e4
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe
Faulting module path: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e1a05ba 83fe554\MSVCR90.dll
Report Id: 8b5dda37-a615-11df-8de4-20cf3011131b
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-08-12T13:28:51.000000000Z" />
    <EventRecordID>2401</EventRecordID>
    <Channel>Application</Channel>
    <Computer></Computer>
    <Security />
</System>
<EventData>
    <Data>Adobe Premiere Pro.exe</Data>
    <Data>5.0.1.0</Data>
    <Data>4bf119d2</Data>
    <Data>MSVCR90.dll</Data>
    <Data>9.0.30729.4926</Data>
    <Data>4a1750b0</Data>
    <Data>c0000005</Data>
    <Data>000000000001dfcd</Data>
    <Data>16ec</Data>
    <Data>01cb3a21ad8357e4</Data>
    <Data>C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe</Data>
    <Data>C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e 1a05ba83fe554\MSVCR90.dll</Data>
    <Data>8b5dda37-a615-11df-8de4-20cf3011131b</Data>
</EventData>
</Event>

Premiere Pro 7.0 dropping random frames from original video

Here is one of many problems I am running into. When I import original video into Adobe Premiere Pro 7.0 it always leaves out a few frames in random spots scattered throughout a clip (I'm guessing this is what is referred to as dropped frames).
I first noticed this when I went to sync the audio mp3 files, which are imported seperatly, to the video clips and found that the audio clips are a few frames longer; and the audio/video don't match up.
I was hoping someone could shine some light onto why this is happening and what can be done to remedy it. I've fiddled around with differnt settings when loading a new project with no success.
I am importing the origina video from a folder on my desktop. It is MPEG-2 format and came from my Sony Handycam DCR SR45 camcorder. Below are the properties for the video according to a video player on my computer.
Video:
MPEG-2 Video
720x480 (16:9)
29.97fps 9100Kbps
Audio:
Dolby AC3 48000Hz stereo 256Kbps (this audio doesn't show up with imported video files which is why I import seperate mp3 audio)
P.S.
I've recently been told that MPEG-2 files are not ideal for video editing. I've also been told that Premiere Pro doesn't recognize AC3 audio, which is why I am importing the audio seperatly as mp3 files that I have created in another program. Also I've been told that the camcorder I use is not ideal for editing purposes.
So, if anyone sees any reasons to disagree or concur with these statements, please let me know. But, as for right now, I currently have existing video from this camcorder that I MUST make work in Adobe Premiere Pro, so please help me work with what I got. Thanks.

I have began uploading 2 vidoes to the DropBox.
One is the original that came from my camcorder, the other is the attempted converted DV AVI.
The footage is a clip of a turkey hunt i filmed for a friend where a turkey is shot at and missed. The video is not that great but I still need it and other similar clips.
I'm not sure if your familar with Dropbox or not. We mainly use it for PDF's from architects and Contractors, but I am trying it for video for the first time. Here is what it states for sharing files publicly:
function(){return A.apply(null,[this].concat($A(arguments)))}
The Public Folder lets you easily share single files in your Dropbox. Any file you put in this folder gets its own Internet link so that you can share it with others-- even non-Dropbox users! These links work even if your computer’s turned off.
Step 1: Drop a file into the Public folder.
Step 2: Right-click/control-click this file, then choose Dropbox > Copy Public Link. This copies the Internet link to your file so that you can paste it somewhere else.
That's it! You can now share this file with others: just paste the link into e-mails, instant message conversations, blogs, etc.!
If you'd like more help with sharing files, head here: http://www.getdropbox.com/help/16
Happy Dropboxing!
- The Dropbox Team
Note: You can only link to actual files within your Public Folder, not to folders.
I guess I will try to paste these links now even though they are still uploading. I will re-paste them later when the upload is complete.
Original Video - http://dl.dropbox.com/u/5773253/Tom%20Turkey%20-%20Original%20MPEG2.MPG
DV AVI - http://dl.dropbox.com/u/5773253/Tom%20Turkey%20-%20Converted%20DV%20AVI.avi
Anyone else who want's to play around with these videos have at it.
I'm glad I found this forum. Thanks for helpin'

My PC can't sleep after Premiere pro CS6 has been invoked, even if it has been closed

My PC can't sleep after Premiere pro CS6 has been invoked, even if it has been closed. I think this is true also for Photoshop.
It fell asleep and immediatly awakes.

You MAY have a corrupted preferences file
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
-except delete file in P6 http://forums.adobe.com/message/4644893
-and setting http://forums.adobe.com/thread/1058426?tstart=0

I have a 4yo MacBook Pro, that has a super-old version of Microsoft Word ('04?) on it. I upgraded to Mavericks. Now Word PowerPC apps are no longer supported. How do I change my default opener to Pages?

I have a 4yo MacBook Pro that has a super-old version of Microsoft Word ('04?). When I try to open a Word document, a note pops up saying that PowerPC apps are no longer supported. How do I change my default document opener to Pages?

Okbart wrote:
Can I safely send the Word Office icons and anything else related to it that shows up in spotlight to the trash?
You mean for Office apps? That, I don't know for sure as I don't use MS Office on my Mac. I would check to see if there is some sort of MS Office uninstaller that needs to be run before dragging the icons to Trash. Either from one of the Office apps Help or About or search the Internet for a solution.
EDIT: A quick Google search found this link which may help you.

Have I set some parameter in Premiere Pro that has removed my audio on some videos?

Similar Messages

Maybe you are looking for