Have iLife disc, but after upgrading to Mavericks disc won't read

Hi
I am trying to re-install my iLife '11 programs on my IMac after I did a full wipe and reinstall to upgrade to Mavericks (OS X 10.9.5 (13F34)). Can anyone help me with how I can re-install the iLife '11 programs? I have tried inserting my install DVD (iLife '11 Retail v11.1) but for some reason it is not reading the disc.
Any help would be greatly appreciated as I am lost without my programs.
Thanks,
Hayley

Hi, not sure if this applies to iLife '11 & 10.9.x, but several people have had trouble re-installing iLife if the Date set is greater than 2010, try turning off Automatic Time update & setting it back.
Does it show up in Disk Utility at all? Do other CDs/DVDs show up fine?
If you haven't yet...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)

Similar Messages

Does anyone have any positive feedback after upgrading to Mavericks?

I have a couple of computers that I bought in February 2012 (iMac, MacBook Pro) running OS 10.7.5, and I'd like to upgrade to Mavericks, but the forum shows all negative experiences with the upgrade, so I'm wondering whether I should wait to install. Thanks all.
Take care,
Brian

Thank you Michel, John, & rgilbert,
I'm neither a technophobe nor technophile--I fall somewhere in between, so I usually wait to upgrade any software until it's been out for a bit, same goes with purchasing hardware.
I work as a photographer, so I have to be able to get around a computer somewhat, and I've never had anything but Macs, which has been since 1992..
Michel, I had 16GB of RAM installed in both my iMac & MB Pro when I bought them, so I'm sitting pretty good for RAM, and I do most of my hardware business with an Apple specialist here in Madison or OWC.
And John, I automatically backup before any major installation, so no worries there.
I have no "crapware," no anti-virus--the only software that would maybe fall under this heading would be TechToolPro, and I don't think that counts.
And of course I know that in most cases folks don't say anything unless they're having a problem, but I always try to say something positive if I can with subjects like this.
I've never had an issue with any upgrades, with the exception of the iOS 7 for iPhone, and 7.0.3 pretty much cleared most of that up.
Two reasons I'm looking at doing it sooner than later: I read an article by another shooter that talked about the improvements in Mavericks for photographers, and I'd like to get familiar with it before I hit the road for a major job in two weeks.
Again, I want to thank you all for your help & time--I really appreciate it.
Take care,
Brian

After upgrade to 10.4 won't read CD-ROM's

I just installed 10.4 from DVD onto my Blue&white G3. Prior to that I installed a Lite-On SOHW-1693S06C combo drive. The Lite-On drive worked fairly well in 10.2 even though it is not technically supported. Now, strangely, it will read DVD's just fine, but will not read a single CD-ROM that I put into it (and I've tried just about every type of CD I can find). When I put in the CD the drive light goes on for a while and then goes off again and nothing - no icon on the screen, no error messages. I found a few posts from a year ago or so that seem to be identifying the same problem. The only solution put forward was to boot from the install DVD and repair permissions. I did that and it didn't solve the problem. Any ideas? (Sorry in advance if this topic has already been covered and solved.)

Do you have any CDs you can try booting from - Diskwarrior, old OS X or OS 9 installation CDs, etc? If none of those will boot I suspect a hardware problem with the drive. Have you tried cleaning the lens?

Windows Fails to Load After Upgrade to Mavericks

Related topic:
https://discussions.apple.com/activity?streamSource=connections
I'm a little late to this party, but hoping to find some help. I can see my WindowsXP Pro partition on the desktop, but after upgrading to Mavericks it won't fully start up. I'll get the usual screens, then the XP loading screen with the blue loading animation. After about 5 passes of the blue thing, it will hesitate and flash a blue screen so fast, that it took me several attempts to snap a photo so I could read it. "Unmountable_Boot_Volume" is the error. It then says to follow these steps... but cuts off and reboots.
One thing of note is that Parallels 10 uses the same XP virtual machine and boots just fine, so I figure XP can't be all that messed up. Maybe a driver issue, not sure. Does Mavericks not support XP? I'm open to Windows 7, but I'd like to backup some stuff first if possible. Maybe I can do that through Parallels?
Below are some details about my setup:
Als-Home-Mac:~ user$ diskutil list
THIS IS AN EXTRA FAT32 DRIVE
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *82.0 GB    disk0
   1:                 DOS_FAT_32 NEWMAN                  82.0 GB    disk0s1
THIS IS THE MAVERICKS DRIVE WITH XP PRO PARTITION
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Big Al Pro              833.6 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
   4:       Microsoft Basic Data                         165.7 GB   disk1s4
Als-Home-Mac:~ user$ diskutil cs list
No CoreStorage logical volume groups found
Als-Home-Mac:~ user$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=81964302336; sectorsize=512; blocks=160086528
gpt show: /dev/disk0: MBR at sector 0
      start       size index contents
          0          1         MBR
          1         62
         63 160086465      1 MBR part 11
Als-Home-Mac:~ user$ sudo fdisk /dev/disk0
Disk: /dev/disk0    geometry: 9964/255/63 [160086528 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: 0B    0   1   1 - 1023 254 63 [        63 - 160086465] Win95 FAT-32
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

Mac Pro 3,1
Quad-Core Intel Xeon
2.8 GHz
Upgraded from 10.6.8, but I tried unsuccessfully to upgrade to Lion first. That went all screwy but was able to go all the way to Mavericks instead. Proobably where things got messed up. I don't remember exactly how I fixed it. I didn't think I could go that current with this hardware.
Als-Home-Mac:~ user$ sudo dd if=/dev/rdisk1s4 count=1 2>/dev/null | hexdump -C
Password:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS    .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 48 26 61 |........?....H&a|
00000020 00 00 00 00 80 00 80 00 ff 1f 4a 13 00 00 00 00 |..........J.....|
00000030 00 00 0c 00 00 00 00 00 ff a1 34 01 00 00 00 00 |..........4.....|
00000040 f6 00 00 00 01 00 00 00 cf 33 84 9c 53 84 9c d2 |.........3..S...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200

Macbook slower after upgrading to Mavericks

Hello, I'm owner of a Macbook Pro MD322LL/A and I haven't had any issues with Lion (the OS that came with) but after upgrading to Mavericks it changed a lot:
Lower performance.
Transitions in the launchpad are laggy (and also buggy).
Start up time increased.
Anyway, that's why I want to make a clean install of Mavericks. Because I think that all these things happens because of making an upgrade rather than a fresh install (same thing occured with my iPhone and iOS 7, but that's another story )
And my question is:
Is it risky to format the Hard Drive and install the OS again? And do I need to do some things before doing it?(in order to keep the license and else)
Assuming that I need just to format the hardrive and install the OS X, isn't it a "simple" of doing it? (like Cmd+R but making a clean install)
Thanks!

This is the report:
Hardware Information:
          MacBook Pro (15-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2.4 GHz Intel Core i7 CPU: 4 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
          AMD Radeon HD 6770M - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
          VirtualBox: Path: /Library/StartupItems/VirtualBox
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:18:12
Disk Information:
          APPLE HDD HTS547575B7E880 disk0 : (750,16 GB)
                    EFI (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) /: 749,3 GB (652,3 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS31N
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          org.virtualbox.kext.VBoxDrv          (4.2.18)
          org.virtualbox.kext.VBoxUSB          (4.2.18)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [invalid] com.bjango.istatmenusdaemon.plist
          [loaded] com.bombich.ccc.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [not loaded] com.teamviewer.teamviewer_service.plist
Launch Agents:
          [not loaded] com.bjango.istatmenusagent.plist
          [not loaded] com.teamviewer.teamviewer.plist
          [not loaded] com.teamviewer.teamviewer_desktop.plist
User Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
          [failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
          [loaded] com.valvesoftware.steamclean.plist
          [not loaded] org.virtualbox.vboxwebsrv.plist
User Login Items:
          iTunesHelper
          BetterTouchTool
          Dropbox
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins::
          SharePointBrowserPlugin: Version: 14.0.0
          FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
          Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
          Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins::
          WebEx64: Version: 1.0 - SDK 10.6
Bad Fonts:
          None
Old applications:
          Cisco WebEx Meeting Center:          Version: 1209.12.2806.0 - SDK 10.5
                    /Users/Guaranimini/Library/Application Support/WebEx Folder/1324/Meeting Center.app
          Keynote:          Version: 5.3 - SDK 10.5
                    /Applications/iWork '09/Keynote.app
          LIMBO:          Version: 1.0.0 - SDK 10.0
                    /Applications/LIMBO.app
          Numbers:          Version: 2.3 - SDK 10.5
                    /Applications/iWork '09/Numbers.app
          Pages:          Version: 4.3 - SDK 10.5
                    /Applications/iWork '09/Pages.app
          WJoy:          Version: 0.6 - SDK 10.5
                    /Users/Guaranimini/Downloads/WJoy 0.6/WJoy.app
          asannotation2:          Version: 1206.25.2804.0 - SDK 10.5
                    /Users/Guaranimini/Library/Application Support/WebEx Folder/1324/asannotation2.app
          atmsupload:          Version: 1209.12.2806.0 - SDK 10.5
                    /Users/Guaranimini/Library/Application Support/WebEx Folder/1324/atmsupload.app
          convertpdf:          Version: 1.2 - SDK 10.5
                    /Users/Guaranimini/Library/Application Support/WebEx Folder/1324/convertpdf.app
          ice:          Version: 1.0 - SDK 10.5
                    /Users/Guaranimini/Downloads/WJoy 0.6/ice.app
Time Machine:
          Mobile backups: OFF
          Auto backup: NO
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 90.34 GB
          Destinations:
                    SAMSUNG [Local] (Last used)
                    Total size: 0 B
                    Total number of backups: (null)
                    Size of backup disk: Too small
                              Backup size 0 B < (Disk used 90.34 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               3%          Safari
               2%          WindowServer
               1%          hidd
               1%          EtreCheck
               0%          BetterTouchTool
Top Processes by Memory:
          238 MB          Safari
          131 MB          com.apple.IconServicesAgent
          78 MB          com.apple.WebKit.WebContent
          70 MB          Dropbox
          66 MB          mds_stores
Virtual Memory Statistics:
          958 MB          Free RAM
          1.51 GB          Active RAM
          601 MB          Inactive RAM
          978 MB          Wired RAM
          817 MB          Page-ins
          0 B          Page-outs
As you can see, there's a couple of things that are "bad" so instead of correcting every single problem (that would take me much longer) I just want to do a clean install and thats it.
arthur wrote:
I suppose you could do that with Internet Recovery as well. You should not have an issue in terms of losing your OS license, as long as you use the same Apple ID that you have been using with your Mac.
I didn't understand the license thing, but if I erase the disk and perform a clean install from a bootable USB that license won't lost am I right?
I made a bootable USB of Mavericks just using this simple command:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/SINTITULO --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
What do I need to do now? go to disk utility select erase, and then install using the USB?
--- TO: hands4 ---
When do I need to do that? after erasing the hard drive with disk utility?
--- TO: Grant Lenahan ---
Yes, I don't really care about the things that my mac has, all the "important" things were backed up

CUDA broken after upgrade to Mavericks

MacBook Pro 7,1 (Mid 2010) 2.66GHz Core2Duo, 16GB RAM, Nvidia GeForce 320M
CUDA Driver 5.5.28
When I start After Effects, I get the following error: "Ray-tracing on the GPU requres an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray-tracing will use the CPU."
CUDA worked fine on this 'graphics card' in Mountain Lion, but after upgrading to Mavericks, it is no longer recognized. Anyone have any thoughts?

Yes - as of now nVidia is not supporting tesla based cards in Mavericks. Make sure to write them and let them know you'd like your card to work in mavericks.

I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Does Mac have any plans to create and/or update drivers for multi-media hardware that is useless to me after "upgrading" to Mavericks? This is a waste of money for free..

I have found that since I "upgraded" to Mavericks, many pieces of audio hardware that was compatable with snow leopard is not compatable with mavericks. these machines are supposed to be the best for multi-media, now, without any warning, Mac has really messed this up. What are they thinking. I just converted from PC. Was it a $3000 mistake. MAC....Get BUsy, It can't be that hard to create some drivers that are compatable with common and popular pieces of hardware needed to do the projects I bought this thing for!!!!

similar problem here. running the latest 13 inch mbpr and ableton live software, mavericks obvsly.
experiencing crashes only with external soundcards attached. it happened with a usb interface (NI audio 2 dj) and with a echo audiofire 2 (firewire through thunderbold adapt.)
keyboard and trackpad got unresponsive after the crash with the usb interface as they run on the usb buss I suppose.
This is interesting: If i m running usb or firewire interfaces plugged in to my thunderbold display at home - i get 0 problems. it just works 100%
so what does this tell us? is the hardware of the macbook defective?
but why does the FW interface crash then when attached to the computer directly and not if attached to the display?
this is extremely frustrating. basically my job is using this machine on stage and i cant use it. i m back to my 2007 macbook now running 10.6, thinking about getting a USED machine which was before mavericks and haswell - think these are the issues and what i would like to know:
WILL THERE EVER BE A FIX FOR THIS ON THE LATE 2013 MBPr??

After upgrading to mavericks all my folders in Mail are gone, with important documents, does anyone have any ideas how I can retrieve them? Thanks Warren

Hi,
After upgrading to Mavericks, all my mail folders in Mail are gone. Does anyone else have this problem or know how to fix this. I only use the apple Mail, not anything else like gmail etc. Its very frustrating as I had importantant documents there.
Thanks
Warren

this might help with the gmail problem: http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/?viewall=true

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

After upgrading to Mavericks, all of my contacts disappeared. Did a "contacts archive" export and the file is 17mbs. Looks like there's data, but none of it at all displays. What gives? 20" iMac, early '09

After upgrading to Mavericks, all of my contacts disappeared. Did a "contacts archive" export and the file is 17mbs. Looks like there's data, but none of it at all displays. What gives? 20" iMac, early '09

After upgrading to Mavericks, all of my contacts disappeared. Did a "contacts archive" export and the file is 17mbs. Looks like there's data, but none of it at all displays. What gives? 20" iMac, early '09

After upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.

after upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.
all my email accounts, all my emails, all my folders & subfolders (received & sent) ... everything.
help!

Remove Adobe plug ins if any.
Macintosh HD > Library > Internet Plug-ins
AdobePDFViewNPAPI.plugin
AdobePDFView.plugin

After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help

After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help

Well where is your library located now if not in the iTunes folder? See the links below on what your iTunes folder should look like and put it back together:
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

I have an iphone 4 and i have upgraded to ios 5. but after upgrading all my apps disappeared and in the summary tab in itunes it jus shows as other data..! please help

i have an iphone 4 and i have upgraded to ios 5. but after upgrading all my apps disappeared and in the summary tab in itunes it jus shows as other data..! please help

When I went to reload my phone it gave the option of restoring with icloud or itunes so i chose itunes (assuming icloud would have many more bugs). Afterwards, I had no music and 6.6g of other.
What I did was go into itunes, clicked my iphone 4, and clicked on each of the top tabs (summery, info, apps, ringtones, music, etc.) and ensured I had them all clicked onto sync/selected playlist etc.As my phone restored, the 6.6g of other dropped to .99g of other.
Unfortunately, all my songs are gone but everything else seems to be in tact. I don't think there is any way around this issue for now with the new ios 5 update when syncing either an ipad or iphone. I have an ipad 2 but am going to hold off on updating it until apple gets the bugs sorted out because, I'm sure you will agree, getting the music back to where you want it to be is a total nightmare and takes ages to not only pick the right songs and artists to put on it, but also the ones that will fit correctly with the space, depending on the size you have.
I hope that helps.

I hav recently upgraded to ios5.1 but after upgrading my ringer volume got low plz can nyone help me

I I hav recently upgraded to ios5.1 but after upgrading my ringer volume got low plz can nyone help me

You may refer to the web below for the upgrade steps.
http://event.msi.com/2013/win8-1/Update.html
After you finished the upgrade, try to update your intel/nvidia driver.

Have iLife disc, but after upgrading to Mavericks disc won't read

Similar Messages

Maybe you are looking for