Have Imac with boot camp windows 7. Sound works great in mac but no sound in windows?

I have new IMAC 24 with snow leopard os and installed windows 7 ultimate 32 with boot camp. The sound works great when in MAC but there is no sound when boot up in windows.The mixers show a sound level as music is plaing but no sound out of speakers or earphones. I read on forum that many others have had same situation with Mac Book Pros and had success by downloading new realtec audio drivers, but my system has Cirius 2406 ab9 drivers and I can't find any replacements for them. Does anyone have a fix?

Keep on trying, keep searching as there are quite a few work around's for different issues.
One way is to reinstall the Boot Camp drivers and update them again via the Apple Software Updater in Windows. You did update them the first time, right?
Or extract the sound drivers from the Boot Camp package (or the DVD if you have it) and just install those again. You should find a few how-to's in the search results.
Sorry I can't help more...

Similar Messages

  • HT3986 sound work perfectly om mac side no sound on windows 7 side

    Hi, Sound work perfectly on mac OS, No sound on Windows 7

    Is this the software downloaded from Boot Camp in OSX?
    Sorry, I see it is, remove the driver (Windows Device Manager) and then restart Windows.

  • Share files between Mac and Windows in same iMac with boot camp

    Hello,
    I am new in using Mac and recently I buy a IMac 24" model.
    I used to use PC a long time with a lot of old document.
    I want to install Windows XP with boot camp.
    But I also want to share my documents, music, video files between Mac and Windows in same iMac.
    How can I do this?
    Thanks in advance,
    Eric

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

  • Problems installing Windows 7 with boot camp, cant find the cd/dvd driver...

    I´m having some problems installing Windows 7 on my new 12,1 (21,5) iMac with boot camp. When the computer restarts and the Windows 7 setup begins, i get the message that the cd/dvd driver cant be found, so i can't continue the installation. I've tried searching online for the driver, but can't find it. The cd/dvd seems to be a OPTIARC cd/dvd ad-5690h, which seems to be produced by Sony. I have a authentic windows 7. I even tried loading everything ver to a usb-drive, but then it wont boot.

    After reading around on this, and other forums I tried to burn a new dvd at reduced speed(2x), but that did'nt work either... I have an authentic windows 7 iso, downloaded with serial, is there any way to boot this from a jump drive or external hdd?

  • I have a problem with boot camp and maybe macbook pro?

    I am having issues with boot camp here is what I did.
    I attempted to partition for windows then this message popped up after 2 minutes:
    Verification failed. this disk could not be partitioned.
    Use Disk Utility to repair this disk.
    so I used the disk utility to repair the problem then this message came:
    First Aid failed
    Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
    The underlying task reported failure on exit
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Incorrect block count for file Temp File
    (It should be 13 instead of 0)
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume bitmap.
    pair",0)
    Checking volume information.
    Invalid volume free block count
    (It should be 23087569 instead of 23087570)
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
    Basic Backup
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

  • Right clicking in Windows XP with Boot Camp Not Working

    When I right click with two fingers in Win XP with Boot Camp it doesn't work. I have to plug in a mouse which gets annoying. Any ideas? I'm running Boot camp 2.1 with XP SP3. I have a new Aluminum MacBook 2.4 GHz with 4GB RAM.

    For ppl like me who can't get any combo of fingers to work on XP for the right click / context menu, here's the solution - click on whatever you want to right click on then hit Shift-F10. Voila.
    Problem solved!

  • No success with Boot Camp

    I have been using VirtualBox with the original release of Windows 7. I thought that I would try out the Release candidate and install it with Boot Camp. I have an internal drive to dedicate to this. So here's what happens.
    I have downloaded the Windows os file and burnt it to a DVD using Drive Utility at its lowest burn speed. I am pretty sure that this disk is ok as the windows installer starts up fine.
    I created a windows partition on an empty internal drive which shows up on Drive Utility as an NTFS drive. I fire up the Boot Camp app and it asks me to insert the install disk for Windows. The installer starts up and I select the disk, making sure to select the correct one, then select the option to format it. The blue donut whirls around for a few seconds and then I get the following dialogue: "Windows cannot be installed on this drive because of error 0x80300024." I may not have the wording correct but the error code is right.
    What does it mean? Can anyone give me a clue where to go from here. Thanks in anticipation.

    Still no go!!!
    I thought that the DVD I burnt might be faulty, so I tried using the known good one that I used with VirtualBox.
    Same result, different error. I got as far as the same screen on the Windows installer. I clicked on the "Format" button, the little blue donut whizzed around for a few seconds again. No dialogue showed up and I thought, success. But when I clicked on the "Next" button, this text appeared with a yellow triangle to the left: "Setup was unable to create a new system partition or locate an existing system partition. See setup log for details."
    How can I see the setup log? Other than the DVD, the only other difference between the two attempts was the drive. With this second try, I chose to format the whole drive with Boot Camp, rather than split the drive between Mac & Windows.

  • No internet with Boot Camp

    Would love any help anyone can provide.
    Brand new Mac Mini - Works flawlessly.
    When booted under Mac OS X, easy access to home/office LAN via Ethernet and/or Airport to our NetGear router.
    Installed Boot Camp and Windoze XP (home) SP2 on separate partition (50% of drive space).
    When booted under WIndows XP, no network available - not direct through LAN, not via Airport... nothin'.
    No firmware updates are available for this model.
    I re-created Mac Drivers CD with Boot Camp Assistant and reinstalled, no help.
    It can't be a Windows driver issue for the wireless router, as the Mini doesn't recognize the ethernet LAN connection either.
    I've read every post I can find on this discussion site to no avail.
    Airport router is currently set to no WEP or any encryption to try to solve this. We have four local wirless LANs - none are visible to the Mini booted under Windows.
    Microsoft says they can't help - no support - it's an Apple product.
    Apple says no support - Boot Camp is beta.

    For those experiencing similar problems - Apple Boot Camp beta 1.1.2 download solved the problem. Reinstall Boot Camp Assistant in Mac OS X, burn new drivers CD, reboot in Windows and reinstall new drivers. Then have to go to Network settings in XP and delete all previous network settings and start from scratch. Mac Mini will now recognize Airport, other wireless networks and obtain an IP address from local LAN on TCP/IP.

  • I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    Kappy wrote:
    Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
    You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
    http://support.apple.com/kb/DL1638
    Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

  • Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?

    Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
    There is only 1 partition, so the Boot Camp process did fail.
    I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
    Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
    Here is some additional screen shots of the type of system I have.
    Thank you for your help with this issue!

    Which copy or version of Windows? and how where was it purchased?
    my window installed itself perfectly on another computer.
    One copy and you want to activate on two computers?
    With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s). 
    did you create 80GB or larger partition?
    also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
    OWC has up to 32GB, not cheap.
    http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
    Crucial is usally very helpful, try email cs.

  • Macbook Pro running Windows with Boot Camp, wanting to use iMac as second monitor.

    I am using a Macbook Pro that is running Windows with Boot Camp. I want to connect it to my iMac so that I can use the iMac as a second monitor. 
    If it is not possible, I also have a TV that I could use using an HDMI, however when I tried this my Macbook Pro running Windows 8.1 did not detect it in the Display Settings.
    What are my options? I just want to use my iMac or TV as a second monitor!!
    Any help is appreciated, tMachanks!

    See if your equipment qualifies:
    http://support.apple.com/kb/HT3924
    http://support.apple.com/kb/PH14264
    Ciao.

  • HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

    Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
    P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
    my bootcamp version in windows 7 is 2.1..

    Uninstall 2.x totally
    Use CCleaner Registry tool
    Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
    BC 2.2 was XP and Vista only

  • I have a mac book pro with Boot Camp that also runs windows.  I upgraded to Lion and somehow it crashes the mac side peridoically.  I am told I need to "clean" it and reinstall lion using the recovery drive.  will that delete the windows partition too??

    I have a mac book pro with Boot Camp that also runs windows.  I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto.  I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system.  My question is will this also delete the "windows" partition drive and all that data too.  If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

    There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
    You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
    If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
    Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

  • I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

    I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

    Your phrasing is not clear. How do you reboot into Mac OS? /can you describe the process step by step?
    Usually, you should do like this:
    - while in win, restart
    - immediately after chime, press option or alt key
    - wait for 2-3 seconds, you should see the boot options
    - select Mac OS partition
    If you have performed all these steps, and, after choosing Mac OS partition, you cannot boot into Mac OS, then your system is corrupt and should be reinstalled.

  • How do I install Windows XP with boot camp assistant, on my IMac?

    How do I install Windows XP with boot camp assistant, on my IMac?

    Lion cannot BootCamp XP.
    You can install XP under virtual machine software (Parallels, VM Fusion, VirtualBox).
    And Windows 7 Pro has XP mode.  XP will requires probably days of pathing after install and will be completely unsupported by MS within 1 year, but Windows 7 Pro still has great support from MS.

Maybe you are looking for