Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

Similar Messages

Windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....aaahhh

windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....as itunes does not pick up the phone I have connected anymore. My ipod synchs fine still and thats over 6 years old!

Hi rubicon7,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this information helps ....
Have a great day!
- Judy

I've iPhone 4s, and I am trying to update it to iOS 5.1 I've downloaded the software from iTunes, but when I click to install it, it says: "There was a problem downloading the software for the iPhone 'Donnbjj1's IPhone'. An unknown error occurred (1480)"

I have an Iphone 4s 32gb and i'm trying to update it to ios 5.1. i've downloaded the software from itunes but when i click on it to install it to my actual phone it says: "There was a problem downloading the software for Iphone 'Donnbjj1's Iphone' . An unknown error occurred (1480)."

iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

HT1657 I have rented a movie from Itunes, but when I try to watch it it pauses itself, then skips to the next scene...can anyone tell me why and as I have paid money for this shouldn't I at least be able to watch without any hiccups?

I have rented a movie from Itunes, but when I try to watch it it pauses itself, then skips to the next scene...can anyone tell me why and as I have paid money for this shouldn't I at least be able to watch without any hiccups?

You've tried restarting the film ? If it still skips then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, 24 to 48 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

I am trying to download from iTunes, but getting message stating insufficient local storage. In usage screen says I have 19 GB left. Don't understand why I cannot download

I am trying to download from iTunes and getting message stating insufficient local storage. In usage screen, states I have 19 GB storage space. Pls help!!!!!

Jenniferwood2829 wrote:
... so I don't understand why I still get this message when I show I have 15GB available in iCloud?
It means you do not have enough Space on your Device and need to create More Space on Your Device by Deleting some items off your device.

Can not download on the computer from itunes. keep getting a message that i don't have itunes. then icon to download itunes. ihave downloaded itunes 2 times.

i can't download itunes from my computer. i receive a message indicating that i should download the latest itunes app. i have installed the latest download at least 3 times.

What's the precise text of that message, please?

Is there a way to stream movies or mirror them from my iphone onto my ipad screen? My iPad memory is too small to download the movies from iTunes but I have them downloaded on my iphone.

My ipad is only 16gb and just about full but my iphone is 64gb and has plenty of space. I have bought movies on iTunes and have been watching them on my iphone, but this seems a bit silly as I have an ipad with a larger screen. Is there a way to mirror or stream the movies from my iphone to my ipad?

Thx - the videos are on my Ipad - that is the problem - they are taking up all the storage and there is no room for anything else. Is there any place I can store them so that I can access them from time to time, but not have they use up all the space on the IPad? Sounds like the cloud is out...

Hello! I have an HP laptop running Windows Vista and Firefox 3.6.23. I am unable to iinstall then new version 7.0.1.exe excute file for the update. Thank you, Emil Ponso

I also run Norton Internet Security, but have never had a problem updating Firefox w/ Norton running..I've tried installing the new version 7..0.1 3 times to no avail.
edit: removed phone number even though spambots may already have it.

What happens when you try and install? Any error messages? Have you tried right clicking on the installer and choosing 'Run as Administrator'?

I use Windows Vista. I cannot open icloud control panel. I get the message " the procedure entry point _objc_init_image could not be found in the dynamic link library objc.dll" Any suggestions?

error meessage "the procedure entry point _objc_init_image could not be located in the dynamic link library objc.dll" Any suggestions? so I canot open icloud control panel.

i ahve same problem

TS5376 itunes 11.1.4 for Windows Vista - I've uninstalled prior version and associated applications, but get message"cannot download" the exe file. Why?

Followed instructions to uninstall iTunes and related components and files, but still get error that the "exe" file cannot be downloaded. Any suggestions on what to do next? This all started because I wanted to sync my iphone to the computer.

I was able to successfully download iTunes after repeated attempts to remove Apple Mobile Device Support finally worked. Had to repair, re-install, then uninstall it. Found useful tips on how to do that in topic "Troubleshooting issues with iTunes for Windows Updates" by turingtest2. After that, my browsers (IE or Firefox) would only partially download the iTunes install file. So paused virus scanner and Windows Defender. and uninstalled iCloud. Eventually IE downloaded the "exe" file and I was able to run it (albeit with several false starts).
Now trying to reinstall iCloud.
thanks for your help.

I have Windows 7 Professional; Firefox stopped working; click on the icon and the circle spins; can't get into Firefox at all, even in safe mode. Please help.

Windows 7 Professional
Windows Security Essentials
I clicked on the Firefox icon. The cursor changed from an arrow to a spinning wheel. Nothing happened. It stayed that way for 20 minutes until I went into the task manager and shut the program down.
I'm forced to use Internet Explorer and it's awful. Please help me.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up
*http://kb.mozillazine.org/Error_loading_websites

HT1386 I have connected my iPad2 to my iMac with a USB cable, and synched my photos. I want to synch my music from iTunes but get this message: "Are you sure you want to sync music? All existing content on the iPad "Marion Blackmer's iPad" will be remo

Sorry, I put my question in the wrong place. I'm afraid I will lose all my photos, etc., on the iPad.

To import your photos to iPhoto, open the app on oyur computer, then connect your iPad. wait for it to show up on the left toolbar and you can select all and import them to your iPhoto library. Drag and drop it to your desktop or wheverever you want them. Is it just photos you wanted to import?

HT201263 i forgot my passcode to my ipod touch and i cant get on it i tried to recover it from itunes but it doesnt to anything when i plug it in it just says the ipod has a passcode and you have to enter it in before you can acsess itunes

i dont know what else to try plz hellp

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

TS1363 I have a new iPhone 4S, I`m using windows vista but iTunes is unable to detect it at all...

I have a new iPhone 4S, I`m using windows vista, although my computer detects an "apple iphone", iTunes is unable to detect it at all. I`m unable to sync any media..

Welcome to the Apple Community.
Once you have enabled find my phone in your iCloud settings on your phone and find my mac in iCloud settings on your Mac, you can log in at iCloud.com and see both devices on the Find my Phone feature there.

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

Similar Messages

Maybe you are looking for