Have installed OSX Mavericks and Vodafone Mobile Broadband Modem no longer connects despite reloading its software. Now cannot reinstall OSX Mountain Lion

Upgraded to OSX Mavericks. Vodafone Mobile Broadband Modem no longer connects. Tried again after reinstalling latest Vodafone Modem software update for Mac OSX, but no use.

Could somebody give a feedback about the solution proposed by Bokir?
I am experiencing exactly the same problem after upgrading to Mavericks with the Huawei E220 modem.
The connection is established for a few seconds, but no data is transfered, and the connection is then closing automatically.
I left the modem plugged in and the Vodafone software set to Automatic, and after numerous attempts and 10 to 15 minutes, it appeared that the connection was finally established.
That is of course no way to work.
After running the VMB uninstaller, there are still a lot of stuff in library cache & preference folder that are pertaining to VMB and not removed.
It is also strange that after uninstalling and reinstalling the VMB software, I am not requested to enter my pin code to establish a connection.
It is obvious that there must be some other VMB files (probably corrupted) somewhere in the system that are not removed by the uninstaller.
I have another macbook pro running VMB without problem and I am really afraid to install Mavericks on this laptop because of this issue.
Thanks again for any feedback.
Jean-Philippe

Similar Messages

  • My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • TS2504 I have installed Logi Pro and it has written over my garageband features (as above). Ive tried to reinstall Garageband as described above with the Installation DVD. But when i get to step 4 it wont let me check or uncheck the box for Garageband, it

             I have installed Logic Pro and t seems to have wreitten over my GArageband 09 functions. when i try to reinstall Garageband alone from the bundle on teh installation DVD it wont let me check OR uncheck the Garageband box (stage 4 in Apple's isntructions above) . It does let me check teh other boxes for iPhoto etc.
    Do i need to reinstall teh complete bundle for iLIfe 09? Will this mean I lose any of my material? eg photos in iphoto or clips in imovie?
    scarey stuff!
    please advise
    sarah

    drumkit2 wrote:
    when i try to reinstall Garageband alone from the bundle on teh installation DVD it wont let me check OR uncheck the Garageband box
    http://www.bulletsandbones.com/GB/GBFAQ.html#installerdisabled
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I upgraded from snow leopard to OSX mavericks and I can't enable airplay...what do I do now?

    I would really like to use my Airplay and multi display option at home. I have jumped from OsX Snow Leopard to Mavericks and now I cant take the small step to mountain lion to get airplay...what now?

    To use AirPlay, you will need the following:
              ▪          iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
              ▪          Apple TV (2nd or 3rd generation)
              ▪          AirPort Express
              ▪          Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/HT4437

  • Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

    Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games. 

    Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.   

  • I just downloaded OSX Mavericks and all my photos have disappeared; it's telling me that iPhoto is no longer supported on my Mac. How do I get all my photos back?

    I just downloaded OSX Mavericks and it tells me iPhoto is not supported. I have lost access to all my photographs. Can anyone tell me how to recover them?
    Thanks!

    Here's the current version of iPhoto.  Try installing that, and see if things work better.

  • I have installed OS Maverick 10.9 and now find titles are included for mac mail addressees. That is, I get Dr John Brown instead of John Brown. That did not happen before. How do I suppress the title?

    I have installed OS Mavericks 10.9 and now find that Mac Mail includes titles for addressees. Thus, it shows 'Dr John Brown' instead of 'John Brown'. I have had the same problem with suffixes with earlier versions and solved that by deleting all suffixes from my address book. I don't want to have to do that for titles. How can I keep the titles in my address book but have them not show for Mac Mail addressess?

    I have the opposite problem, Barry ... now only the eMail address shows ... no name at all, even though I type it in!

  • Imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer's video card does not meet the minimum system requirements.

    imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer’s video card does not meet the minimum system requirements. What to do? Thanks for any help in advance.

    I am not 100% sure this is the issue, but I saw a different thread about the ATI Radeon HD 2600 not being OpenCL compatible for another program and that a newer compatible graphics card would be required to solve the problem.  I am getting the same message with my 2007 iMac 24".

  • I downloaded OsX mavericks and it doesn't want to instal.

    i downloaded OsX mavericks and when i came to instal it a message appeared 'close all applications to instal'. i clicked on it several times, waited, and nothing happened. Then i clicked 'quit instal', the downloaded Os X mavericks disappeared and i'm downloading again. Did anyone face the same problem? Any idea what to do if it doesn't instal again?

    Hi daddyh,
    Welcome to the Support Communities!
    The "Install OS X Mavericks" application will appear in your Applications folder once it is downloaded.
    Check the Applications folder to see if it is there, or do a Spotlight search for this file.
    Double click on the Installer file to begin the installation.
    The file will be removed once Mavericks has been installed.
    Apple - Upgrade your Mac to OS X Mavericks.
    http://www.apple.com/osx/how-to-upgrade/
    Apple - OS X Mavericks - See everything the new OS X can do.
    http://www.apple.com/osx/whats-new/features.html
    Cheers,
    - Judy

  • Question:  installing osx maverick and it has stalled midway.  How do i get it to continue installation?

    Question:  Am installing OSX Maverick, and installation has stalled midway through.  How do I get it to complete the installation ? Tks.

    http://www.apple.com/support/mac/app-store/contact/

  • Was installing osx mavericks and now the iMac is restarting itself over and over

    Was installing osx mavericks and now the iMac is restarting itself over and over

    Shut the power clear off, wait a minute or 2 and restart and see if that clears the problem.
    Don

  • ASA 5505 VPN and Sprint Mobile Broadband clients.

    I have a strange problem, it's something that just started recently when we had a user try to gain access with a Sprint Mobile Broadband card. We have quite a few remote users, probably not more than 6 ever connected to the VPN at once, and I have not heard of any issues until recently. We are starting to require more travel to remote locations, so the use of the hotel internet, as well as Sprint mobile broadband is becoming more important.
    There are a few issues here. Everything is IPsec.
    Mac OSX with VPN client version 4.9.01 will connect to the VPN when connected to a normal internet connection, but as soon as it gets on the Sprint Mobile Broadband device, it connects for exactly 5 seconds and disconnects.
    Windows XP Pro, has no problems with normal internet, on the wireless broadband modem, it will connect to the VPN, but have no access to internal resources or access to the internet.
    Windows Vista, has issues all the way around, but mainly when connected to the wireless it has the same issues as XP minus the internet browsing.
    Strange thing is, all these problems seem to been different, but they all started around the same time. I have been testing everything I can think of. Talked to Sprint, which the lady there was actually very helpful...just have to get to the right person. But nothing we tried did any good.
    Does anyone know of any settings on my ASA that I need to change in order to get these types of connections to work?
    The best part of all this is that my Linux machine can connect/surf/and browse the internal network through the VPN just like it normally would work.
    Something has to be wrong with my client config settings that is causing this to happen.

    Have you enabled NAT Traversal? (Both on the Client and ASA)
    That would be the first thing to check.
    http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
    Regards
    Farrukh

  • Vodafone Mobile Broadband Line Dropping

    Just bought a Vodafone mobile dongle which keeps dropping the line in about 4 minutes. Full story below + log record.
    Vodafone Spain support not helpful, any advice greatfully appreciated.
    Story:
    I have just bought a PAYG Vodafone K3772-Z mobile broadband dongle in Estepona in Spain and have had problems in getting it to work without it always dropping the connection.
    The connection drops after 4:12 and 4:26 minutes, irrespective of the data throughput, in other words is does not seem to be a data limit problem. It drops the line and reports "Searching for network…" "Not connected" and the signal bars and Connect button are greyed. It never finds a network and I have to exit and re-open the Vodafone app.
    The dongle is running Firmware BD_K3772V3.0
    My laptop is a MacBook Pro 6.2 running OS10.8.1 with Vodafone Mobile Broadband 4.09.01.00
    The network shows signal is strong with all 4 or 5 bars "full"   I also have a Vodafone Blackberry which also shows a strong signal.  I also have an O2 UK broadband dongle which works perfectly.
    I get the same results if
    I plug the dongle in to either of the two USB ports, if
    I use an short USB extender cable in either of the two USB ports, and if
    I set it to prefer 3G or GPRS
    Settings:
    Main - I see Mobile Connection = vodafone ES HSPA or vodafone ES EDGE, SIM (removed for security) 1, Signal = Excellent
    Prepago - Click on "My Account" I get redirected to "http://www.vodafone.es/particulares/mi-vodafone/home.jsp" which returns a error page…
    Connections - only enabled for "Mobile Connections"
    Devices - only the "Mobile Devices" is enabled with 3G preferred (the other options here seem to make no difference)
    Preferences:
    General - these will not affect connections
    Always Best Connected
    - VPN - Prompt before...
    - Data - Prompt before...
    - Roaming - Prompt before…
    - Delay - unchecked
    Start & Quit
    - When Mac Starts - Start app
    - When Close - Quit app
    - Auto Options - start when device…
    Account Type - Prepago
    Language - Use System..
    Pin
    - Save Pin - checked
    - Request Pin - checked
    - Change Pin & 2 - no entries
    VPN - None
    I have deleted the app and reinstalled several times...
    Log:
    01/09/2012 12:50:31.000 kernel[0]: nspace-handler-set-snapshot-time: 1346496633
    01/09/2012 12:51:03.000 kernel[0]: Ethernet [AppleUSBCDCECMData]: Link up on en6, 0-Megabit, Full-duplex, No flow-control, Port 3, Debug [0000,0000,0000,0000,0000,0000]
    01/09/2012 12:51:08.888 com.apple.InternetSharing[67]: *** no interface for service
    01/09/2012 12:51:08.909 configd[17]: network changed: v4(en6+:10.1.72.95) DNS+ Proxy+ SMB
    01/09/2012 12:51:26.611 System Preferences[1788]: Could not find image named 'InvalidDataIcon'.
    01/09/2012 12:51:26.658 System Preferences[1788]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    01/09/2012 12:51:26.658 System Preferences[1788]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    01/09/2012 12:51:27.468 Vodafone Mobile Broadband[1766]: -[__NSDictionaryI messageDict]: unrecognized selector sent to instance 0x2656e40
    01/09/2012 12:51:27.468 Vodafone Mobile Broadband[1766]: -[__NSDictionaryI messageDict]: unrecognized selector sent to instance 0x2656e40
    01/09/2012 12:51:27.470 Vodafone Mobile Broadband[1766]: (
              0   CoreFoundation                      0x907aa7ab __raiseError + 219
              1   libobjc.A.dylib                     0x96a8a602 objc_exception_throw + 230
              2   CoreFoundation                      0x907ae41d -[NSObject(NSObject) doesNotRecognizeSelector:] + 253
              3   CoreFoundation                      0x906f6ab7 ___forwarding___ + 487
              4   CoreFoundation                      0x906f6862 _CF_forwarding_prep_0 + 50
              5   NMSmsCore                           0x0022928d -[NMMessageDeleter messageForDict:] + 197
              6   NMSmsCore                           0x00228fca -[NMMessageDeleter smsKitMessageDeleted:message:] + 46
              7   NMSmsKitAsyncPCCard                 0x009cb201 -[NMSmsKitAsync removeMessagesStage2:] + 205
              8   CoreFoundation                      0x906fc3ed __invoking___ + 29
              9   CoreFoundation                      0x906fc327 -[NSInvocation invoke] + 279
              10  NMSmsKitAsyncPCCard                 0x009d1f61 -[M2NCommDevice returnResult:forNotification:] + 965
              11  NMSmsKitAsyncPCCard                 0x009d8c95 -[M2NCommDevice deleteSmsArrayStage2:] + 272
              12  NMSmsKitAsyncPCCard                 0x009d0f15 -[M2NCommDevice commandResult:] + 98
              13  Foundation                          0x9248b10f __NSFireDelayedPerform + 413
              14  CoreFoundation                      0x906c20d6 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 22
              15  CoreFoundation                      0x906c1a75 __CFRunLoopDoTimer + 709
              16  CoreFoundation                      0x906a6892 __CFRunLoopRun + 1730
              17  CoreFoundation                      0x906a5d6a CFRunLoopRunSpecific + 378
              18  CoreFoundation                      0x906a5bdb CFRunLoopRunInMode + 123
              19  HIToolbox                           0x94efe8aa RunCurrentEventLoopInMode + 242
              20  HIToolbox                           0x94efe619 ReceiveNextEventCommon + 374
              21  HIToolbox                           0x94efe494 BlockUntilNextEventMatchingListInMode + 88
              22  AppKit                              0x99be7a5a _DPSNextEvent + 724
              23  AppKit                              0x99be728c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
              24  AppKit                              0x99bdd6dc -[NSApplication run] + 855
              25  AppKit                              0x99b808e6 NSApplicationMain + 1053
              26  Vodafone Mobile Broadband           0x00003132 start + 54
              27  ???                                 0x00000002 0x0 + 2
    01/09/2012 12:55:26.000 kernel[0]: Ethernet [AppleUSBCDCECMData]: Link down on en6
    01/09/2012 12:55:27.610 com.apple.InternetSharing[67]: *** no interface for service
    01/09/2012 12:55:27.634 configd[17]: network changed: v4(en6-:10.1.72.95) DNS- Proxy- SMB
    01/09/2012 12:55:49.809 configd[17]: IPConfiguration: MANUAL Addresses missing/invalid

    If it doesn't work with Yosemite, contact Vodafone.

  • Updated to OSX Maverick and now I can't stream shows from DirectTV.

    I recently updated my macbook pro to OSX Maverick and now I can't stream shows from DirectTV.

    copied from DirectTV, so look like have to wait then.
    DirectTV wrote:
    Macintosh computer running Mac OS X 10.6.x (Snow Leopard), Mac OS X 10.7.x (Lion), or Mac OS X 10.8.x (Mountain Lion) with any of the web browsers below:
    Firefox 13 or above
    Safari 5 or above
    Safari 5 or above

  • ICal on OSX Mavericks and iOS 7

    I have upgraded my MacBookPro to OSX Mavericks and my iCal calendars no more syncronize between my iPhone iOS7 and the Mac.
    Where do I set up how the calendars are being syncronized, on the iPhone or on the Mac ? I'm confused...

    Sorry to tell you both that there are so far no easy answers.
    I am like you not a Mac expert and so far even the experts have not been any help.
    You could try joining the discussion at https://discussions.apple.com/thread/5460803 but be aware that there are some unhelpful people throwing insults around at each other.
    If you want to try the OS X Server option  http://www.macworld.com/article/2061183/itunes-ios-syncing-gone-solve-it-with-se rver-.html is a good explanation of how to implement this. I've not tried it because I have read that even that solution presents a few problems, such as not reproducing old calendars.
    As things stand my best advice, for what is worth is to send feedback to Apple
    http://www.apple.com/feedback/macosx.html
    http://www.apple.com/feedback/iPhone.html
    Sorry not to have been anymore help.

Maybe you are looking for

  • How do I remove an entry from the "Store Files" drop down list in the "Import Settings" section of Aperture 3.3.2

    The dropdown list "Store Files" in the "Import Settings" section of Aperture 3.3.2 displays the history of the entries previously added to the list. Some of the entries are no longer valid and I'm trying to delete them but I can't find a way to do th

  • Correlation Problem with Oracle BPM 2.1.2

    I have developed a BPEL process that invokes Axis web services and then wait an asynchronous message from the services, using pick with onMessage tag. Previously, I do my work with Oracle BPM 2.0.10 and designer 0.9.5, it works well. But now, I have

  • Access vs. SQL Server for online database

    I have a client who insisted on using Access for his online database because he wanted to be able to download it quickly and easily to be able to manipulate data on his end. However, after importing about 20 thousand records into his existing databas

  • Swing and Pdf

    Hi,all:: I would like to generate out put in pdf format from swing application or in HTML format plz help me regarding this thread. Plz suggest third party tool like "JFreeReport,RReports,.....i would like to do it with my self. Thanking you in antic

  • Set admin account to not need permission to RDP

    I work IT for a company and when I send out instructions to employees to make changes to PC settings and respond when completed, naturally not everyone completes these tasks. So I ultimately need to RDP into the leftover PC's to make the changes myse