Have just upgraded Itunes to new version, and Iphoto to new version. All went well. but this morning unable to open either of them. keep getting " Itunes quit unexpectedly, reopen" I keep on reopen, but to no avail. Any idea how to make it work?
After upgrading to IOS5, and new version of Itunes and new version of Iphoto11, I now have a problem opening itunes and iphoto11.
I get" Itunes quit unexpectedly, reopen" same message for Iphoto. Tried and tried and tried to reopen, but keep getting the same message over again.
Any idea how to fix it?
Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
Similar Messages
-
My iPhone only works on iOS 3.1.3. Any ideas how to make it work on iOS 4.2.1?
Hi guys
I just bought an iPhone 3G very cheap, for 20$. Its battery puffed up and pushed up the screen a little bit, and also it broke about 3 screws on the right side, so the vibrator is not working in it. By the way, i bought a new battery, and everything was fine.( The screen has no errors, the phone functionality is 100%, the buttons are fine.) i noticed, that the phone restarts, or just switches off in 5 minutes. I restored it, (iOS4.2.1) setting as new iPhone and it continued to restart. So I tried install an iOS 3.1.3 on it, and now it's working, but I'm wondering why is this happening, and how can I install iOS 4.2.1 on it without these restarts.
Thanks for helpYour phone is unsupportable. If it weren't for the physical damage and the fact that you opened it up and attempted repair yourself, you also downgraded iOS, meaning no one here or at Apple can help you at all.
At least you're only out $20, plus the cost of the battery you bought. -
MP4 Video playback problem - any idea how to make it work?
Mp4 video files are working when opened from local filesystem but now working when opened from the web
Here is example:
var video:Video = new Video();
addChild(video);
var nc:NetConnection = new NetConnection();
nc.connect(null);
var customClient:Object = new Object();
customClient.onMetaData = ns_onMetaData;
var ns:NetStream = new NetStream(nc);
ns.client = customClient;
ns.play("http://www.voyda.eu/projects/not_working2.mp4"); // here is actual a file so you can test it
ns.play(url);
video.attachNetStream(ns);
Using above code will result in not playing the video file. Interesting think is that the same video file is played well when opening from local filesystem. Just download the file, change ns.play param to "not_working2.mp4"
ns.play("not_working2.mp4");
and see if it's working.My first guess would be that you're running into a security/sandboxing issue. Can you send me your Flash Builder project file?
Thanks,
Chris ([email protected]) -
IHeaderHelperBean isn't working - any ideas how to make it work?
Hi,
IHeaderHelperBean is one of the 3 or 4 predefined Spring Beans for Composites in SOA Suite. However, it isn't working for me as expected. I'm following the Oracle Tutorial by Ramkumar Menon "Predefined Spring Beans" available here: https://blogs.oracle.com/rammenon/entry/spring_framework_samples
My code looks like this:
@Autowired
private IInstanceHelperBean instanceHelper;
String fileName = instanceHelper.getComponentName() + "_" + instanceHelper.getComponentInstanceId() + ".txt";
headerHelper.setHeaderProperty("jca.file.FileName", fileName);
fileAdapter.write(message.getBytes());
returnMsg = "Successfully wrote " + headerHelper.getHeaderProperty("jca.file.FileName");
What I'm expecting is:
- The filename of the generated file should be "SpringHeaderAccess_spring.txt"
- The file should contain the message.getBytes() content
- The return message should be "Successfully wrote SpringHeaderAccess_spring.txt"
Instead I get:
- The filename is SpringHeaderAccess_spring (".txt" missing)
- The file is empty
- The return message is "Successfully wrote null"
If I comment out the following line:
// headerHelper.setHeaderProperty("jca.file.FileName", fileName);Then I get:
- The filename is "ToBeOverridenInTheComposite.txt" (this is what I had defined in my FileWriterService_file.jca xml file) - OK
- The file is not empty, it contains the text I sent via WS in my EM Test - OK
- The return message is "Successfully wrote (null)" - not OK.
Does anyone know why I am not getting the expected behavior, or where to get help for this?Your phone is unsupportable. If it weren't for the physical damage and the fact that you opened it up and attempted repair yourself, you also downgraded iOS, meaning no one here or at Apple can help you at all.
At least you're only out $20, plus the cost of the battery you bought. -
Hi
I have just upgraded to the new version of itunes on windows 7. I have just added 8 albums (Mp3 format) to my itunes library, synced with my Ipod classic and my wifes ipod nano, the albums have transferred to the devices but wont play when selected. Yet they will play in itunes.
When I select the album on the ipod, it opens up as normal but when you press play nothing happens other than a wining sound from the hard drive of the ipod.
My itunes library is a mix of itune purchases and mp3 purchases and this is the first time I have experienced this issue
Hopefully there is a simple explanation to thisIt is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
i completed a software update yesterday and whenever I try and launch iTunes now it crashes almost immediately. I have tried downloading an installing the latest version but to no avail - any ideas?
Have you tried temporarily turning off your firewall and antivirus software until the download has completed ?
-
I have just upgraded iTunes to version 11 and now cannot stream via my airport express to my hiFi. I get error 15000. how can this be corrected?
You've done great so far to upgrade to Leopard & install more RAM. Now install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
After you install the 10.5.8 update, click on the Apple in the menu & select Software Update. You will then be informed of some application updates. iTunes may be one of them. Then click to install the app updates.
Cheers, Tom -
I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.
I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
OSX 10.10.3
Best. -
I have just upgraded my iPad to ios6 and iTunes is now in Spanish - I am on holiday in Spain. I have also updated my iPhone but iTunes is still in English, can anybody help me get English back on my iPad
I had the exact same issue with mine. But I'm in Mexico. It was forcing me to use iTunes in Spanish even though my account is in the US. I turned my iPad off, then on again, and presto! My iTunes is back into English and my account is recognized again.
-
I have just upgraded to an Iphone 5 and cant get my contacts to sync. My 4s Contacts default account was from my Mac - but I dont seem to ahve this option on my 5? How do I sync them?
The way I do it is I hook to my windows computer, it will pop up iTunes. I click iTunes off. The phone will show as another drive on your computer. Click it open then migrate to the photos folder from the iPhone.
Then select all, cut then right click on your pictures folder on your computer or make a new folder on your desk top like I do and right click on new folder and select paste.
Photos will be gone. Just remember to turn off the iPhone sync in your photos folder on the phone or they will come back
Good Luck -
Have just upgraded - iTunes cannot run
Hi I wonder of anyone has any ideas.
I have just upgraded iTunes on my Vaio XP Pro PC and now I try to open itUnes or my iPod and get tyhe message "iTunes cannot run because it has detected a problem with your audio configuration". I have tried deleting and reinstalling, but it does not even allow that, nor to do a iTunes repair, so am stuck.
Help appreciated.
B. J.I had the same problem, you need to uninstall and re-install Quick Time only, follow these instructions
http://docs.info.apple.com/article.html?artnum=304424
Tom -
I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.
I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac
-
I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
<Email Edited By Host>You are only as young as you feel......
This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on only the albums or playlists that you want to sync.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want.
Maybe you are looking for
-
Hi all, I need to map an item node that can apper severl times (in IDOC) to one row in the target MT, every 3 items i need to map to one row in the taget - one item after the other in the tagert (concatenat 3 items) my Itam row in the target looks li
-
Pictures of me, who does not know how i look in Re...
Hello skype team, i just wanted to say that a virus is trying to send me pictures of me from freinds, who don't even know me from the Reallife. i am pretty sure that it is a virrus, because my father klicked on it on hois own PC and now he has to fig
-
Hi Experts, I have a form with lot of fields spanning across multiple pages - in order to make the form user friendly and enable the user to keep track of their form filling activity, I want to add a progress tracker which will track the percentage o
-
Problem displaying Web charts via Excel 2003
Hello, While displaying a Web template via a hyperlink in <b>Excel 2003</b> (the hyperlink contains the template's URL), all charts in the template aren't displayed. The small red x appears in the chart's area. Charts are displayed only after refresh
-
Risk level changing through entire system landscape in compliance calibrato
Hi All, Could you please provide the process of risk level chnaging(I.e high to low or low to medium) throughout the landscape in compliance calibrator? It wil be helpful.