Have LG Extravert with Backup Assistant but can't access BA online to manage contacts
I have backed up my contacts on the ol' phone, hoping to print them and/or import into my contacts on the Mac (and ultimately sinc the new iPhone to the Mac). Can not for the life of me find the Manage Contacts online from which to print/import. Keep getting into a cyclical loop opening new windows and trying to get me to sign up for Verizon Cloud, something I don't need and certainly not something that is getting me to the contacts I need to see. Trying to call in for help and after long waits on hold, getting dropped, and getting texts that ask me to call a number....and that number wants to sell me Verizon equipment. Sooo irritating! Where is the Backup Assistant list of contacts -- that's all I need and it seems to be allusive for me and others looking for the same thing.
BackupAssistant is here: My Verizon Online Sign In - Verizon Wireless
Similar Messages
-
HT4436 Why can't I sign up for iCloud on my PC, i have my itunes music on it but can't access it?
This is so confusing... I'm not sure how this works... I just saved my music to the cloud and paid for itunes match but I don't understand how it can work if I can't access it or sign into it with out owning a mac/apple product. Please help.
You need an account to use iCloud or how would it know what data is yours? or who you are.
iCloud Setup for PC -
Windows 7 Won't work with GT704WGB - Connects, but can't access internet or ping router
Upgraded my Verizon DSL.
I replaced an old WireStream DLS router and NetGear wireless access/router with Verizon's GT704WGB.
After I replaced it, Wireless connections from Windows 7 no longer work.
Help. Any ideas?
1. The GT704WGB installation seemed to be easy and successful.
2. I have 3 devices and 4 operating systems
a. An iPhone - It connects to my wireless network and works fine.
b. An Acer lap-top running Windows XP service pack 2 - It connects to my wireless network and works find.
c. An Hp Pavilion lap-top running Ubuntu Linux
i. It connects to router via cable and works fine.
ii. It connects to router wirelessly and works fin.
d. The same Hp Pavilion when booted to Windows 7 doesn't work wirelessly. :-(
i. It connects via cable to router and works fine
ii. When I disconnect cable and connect wirelessly IT DOESN'T WORK. :-(
What happens is Windows reports the the wireless adapter has connected to the network, but says it is NOT CONNECTED TO INTERNET. Further I can't ping the router, 192.168.1.1. I have checked the IP4 properties and settings for the adapter. They seem
fine.
1. Adapter has an address on the network.
2. DHCP is enabled.
3. Gateway is provided automatically by DHCP
4. DNS is provided automatically by DHCP.
Pinging router gets no response. Attempting to resolve a name, www.google.com reports unable to resolve name.
All of this works perfectly when directly cabled to router.
Any help with how to troubleshoot this would be appreciated.
Solved!
Go to Solution.Solved my own problem. Sorry for the spam. :-)
Windows does not support multiple gateways. I had foregotten I had a 2nd wireless access point/router plugged into the network (Cisco/Linksys E1000). That router had been working fine in combination with old SpeedStream DSL router from Verizon, but apparently it introduced a second gateway address which was in conflict with GT704WGB.
Solution:
1. Unplug Cisco E1000. Reset it to factory settings by pushing red button.
2. Plug Cisco E1000 back into network.
3. Use Cisco CD and setup.exe to "install" E1000.
4. Use Cisco CD and Cisco Connect to reconfigure E1000.
5. Done.
All devices working with all OS's including Windows 7. -
Ipod touch shows connection with home computer but can't access internet
Just got ipod touch...and can't connect to internet on home computer. Wifi is on and it shows connection to my home computer but I can access the internet.
What iP address is shown on the iPod for network connection? If it starts with 169 you are not connected to the network, the 169 IP is assigned by the iPod and not obtained form the router.
I would try:
- powering off and then back on yur router.
- Reseting network settings on the iPod: Settings>General>Reset>Reset Network Settings.
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
Have WIFI connection but can't access Safari or App store, nothing. Can anyone help??
I have just bought a iPad 2 WI-FI 16G today. I have a full WI-FI connection but can't access the App store or Safari for any webpages, can anyone help?
Thanks!!!!Despite what you call, "a full WiFi connection", you may not really be connected to your WiFi network.
Your router may not have given your iPad a valid local network IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power to the router for 30 seconds and then restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
Or is the version of iTunes (within recent updates) not an issue when restoring a library?
Using Windows 7.
Any help please?From the top of the page where the scripts live...
The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
tt2 -
Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.
Use migration assistant to move your files. http://support.apple.com/kb/HT4889
-
Dear Staff
I have a consultation with you. Because my sister is updating the IOS8 I phone 4S. Then was not able to use it. Random screen freezes apple. So bring your instruments to Restore Center. Machine can use it. But can not access the page that actually works. Because of the problems with ID of icloud.
She forgot the ID of the user and that of the other. I caught only a password is *******. I would like to ask for technical assistance. What should I do to get back to work normally. Or you can reset the ID and password or not., And set to work. If you do not have an iPhone, this airplane. It becomes a good paperweight itself.Hope you will understand. Buying splash, it is not easy because it's expensive.Learn to understand and to help.
Highly respected
Sarawut
My email: ********
<Personal Information Edited By Host>It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service. -
On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..
Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it. -
Apple tv is giving me a meesage that says... There is a billing problem with a previous purchase. Go to the iTunes Store on your computer and click Purchase History to resolve problem. I have gone to my purchase history but can't seem to fix this issue.
You can contact the iTunes Store Customer Service department at no charge using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find an "Email Us" button) and explain your problem to them.
Copied from Varjak Paw in :https://discussions.apple.com/thread/2598671 -
I have just bought a new pc with windows 7 my old computer cannot be started so I cannot deauthorise it etc, how do I now put my iphone 4 on my new computer, I don't care about the songs I have those on external hard drive, but I don't want to loose my contacts, calenders etc
Terry,
Plug your iPhone 5 into your Leopard Machine.
Fire up iPhoto.
The phone should become available in iPhoto, and then you can import the camera roll.
-Alan. -
I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve thisHi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How can I use pdf pack to convert cubase documents (music scores) into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?
Hi mariab,
What format are those music scores (I'm not familiar with cubase documents). But, it may be that Adobe PDF Pack doesn't support that format. In that case, Acrobat is the way to go. You can then print your files to PDF as you'd like. You're welcome to try Acrobat for free for 30 days to see whether it's going to work for you. If you decide it is, and you'd like to use it going forward, you could convert your PDF Pack subscription into an Acrobat subscription.
Best,
Sara -
I have Macbook Air with Yosemite os but i can't transfer my file on ftp server
i have Macbook Air with Yosemite os but i can't transfer my file on ftp server
i need helpI'm confused how you think someone on Apple's discussion board can help you with what's clearly a Windows Server problem.
Surely this would be something better asked in a Microsoft support forum?
Maybe you are looking for
-
How do i remove a device from my apple id on find my phone app with out erasing the device.
How do I remove a device from my apple id on the find my phone app with out erasing it becase it still belongs to my child? I need to remove a iPad mini and a iPod 4th gen. Thanks
-
Cannot deactivate Captivate License offline
We have a volumen license for Captivate 6 in our company. Due to the security settings in our laptops Captivate cannot connect to the internet so we used the off-line process to activate the license in one of our laptops. Now we want to release it an
-
Strokes from PSD not showing in After Effects CC 2014
Hi, I made a PSD of a bumble bee. On the oval shape for the body I used the stroke setting as black and the fill as a shade of yellow. However, when I import the PSD into after effects (to animate) the stroke is missing and it makes the bee look horr
-
Hello, say I make a change to the config of a router or switch, such as the addition of new lines. If I then decide I want to revert to the original config, I understand that I can just paste the original config back in via the terminal. However doin
-
Enduser doc and training material
Hi Gurus, i m working on BI-CRM project and my role is to prepare enduser doc and training material for BI reports .project in now in realization stage.Can any one advise me how to prepare the these documents? points will be rewarded. thanks kranthi