Have macbook 13 inch, full trackpad yet gestures does not work with Lion

Installed Lion, tried to use gestures but does not work, have macbook with full trackpad without bottoms, went to System Preferences, Trackpads, checked for all features, is there anything else I need to do?

Check some features change others,and if you check someones doesn't work,check it and be sure you no asking do different things with the same gesture,happen to me too so i take the time to check uncheck what i check..

Similar Messages

  • My cannon printer worked with snow leopard but does not work with Lion

    My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. I am a novice with apple so can you tell me how to do any changes carefully.

    Have you downloaded and installed the latest Canon printer drivers?
    http://support.apple.com/kb/DL899

  • VMware Fusion 2 does not work with lion

    I need the VMware Fusion to run my dictonary on the Mac. I have up to now Fusion2 and this does not work with the lion.

    jbjoret wrote:
    VMWare and Parallels hook themselves deep with the OS and are not standard applications.
    Parallels broke in the 10.6.8 update, caused a lot of headaches around here.
    I don't think they follow Apple's rules too well.
    Fusion might be a bit less feature rich, but it seems they are more complaint. Also Apple sells Fusion and likely uses it themselves.
    Both are excellent of course.

  • External Hard Drive does not work with Lion

    Hi
    My External Hard Drive does not work with Lion this message appears:
    NTFS-3G could not mount /dev/disk1s1
    at /Volumes/My Passport because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)
    can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Cheers,

  • Why does Corel Suite 10 does not work with Lion OS?

    Why does Corel Suite 10 does not work with Lion OS?

    Either it's incompatible or it's a PPC-only application. PPC applications are no longer supported in Lion because there is no longer a Rosetta emulator. Contact Corel for support.

  • How can I go back to snow leopard my epson stylus Photo TX810FW does not work with Lion

    My Epson Stylus Photo TX810FW printer does not work with Lion how do I go back to Snow Leopard?

    Did you try removing the printer from the queue and then reinstalling it?
    I attempted to print this morning for the first time after upgrading to Lion and discovered that while everything appeared normal on my Epson printer, it would never print.
    I opened System Preference > Print & Scan and deleted the printer.
    I then added the printer back and it now working again. Worth a shoot first I should think.
    Much easier the a downgrade.
    Allan

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • HT4623 my iphone doesn't work here in Albania after i made an update,it says that u have to change ur Sim Card cuz does not work with ur Carrier...what do i do?

    Hpls help me ,my iphone does not work after i updated and restore it..it says that u have to change ur Sim Card..cuz the carrier that u use its not known
    But it has worked perfectly before the update!

    Your iPhone was almost certainly jailbroken to unlock it from the original carrier. Restoring the iPhone has now removed that jailbreak and the iPhone has relocked back to the original carrier. Only that carrier can authorize an official, permanent unlock, so you will need to contact that original carrier and ask if you would qualify for unlocking.
    Regards.

  • Acrobat 7.0 does not work with lion

    Why does my Acrobat profeesional 7.0 not work anymore. just installed Lion os.  Can this be fixed? Do I have to buy another version?

    Acrobat X Pro is the only version Adobe states works with Lion. You'll have to upgrade.

  • Keynot does not work with Lion OSX 10.7.2

    First there was the problem with the hidden Library/application Support/iWeb/domaines, which is an important problem for me as I use my web site to show people what kind of work that I do (videos with still photography); now there's the problem with Keynote, which does not even open with Lion OSX 10.7.2. Up until now, I was using Keynote to do my video projections in small town halls. I use Protools for the sound and Final Cut (that's another problem!) for the photos and then do a Quick Time session which I put in Keynote. It was working just fine - until Lion came along.
    It seems to be well known that Apple is going to discontinue iWeb (let's not talk about what they did to Final Cut) - and now it looks like they've got plans for Keynote as well. It looks like the solution is either to use PowerPoint rather than Keynote, or to downgrade back to Snow Leopard. I'm tempted to change to PowerPoint just to keep in the race, but where is Apple taking us? I'm not sure that what Apple want's us to do is really good for us! But is it realistic to hang on to Snow Leopard? Are the PCs better or are they doing the same thing? It almost seems as if there were commercial agreements between those who run everything...but that's another story - or is it?
    Théo

    Yes, it should work with Lion.  It does for lots of folks.
    Are you getting an error message of some sort?  If so, see #C2 in Time Machine - Troubleshooting.
    If that doesn't help, try re-selecting it, via Time Machine preferences.
    Or try a "full reset" of Time Machine, per #A4 in the Troubleshooting article.
    Or reset the TC itself, per http://support.apple.com/kb/ht3728

  • My belkin play max router software does not work with Lion

    Does anyone know if there will be a fix with this?  My imac is only 2 months old and my router is the same age.  Since upgrading to lion I have frequent dropouts and no working self-healing program.  I have changed channels with some succes but it's much less reliable than pre
    Thanks

    Here's their  reply, so the software is not compatible with Lion and no fixes in vew:
    Dear customer,
    Thank you for contacting Belkin Technical Support.
    I understand your concern and I would certainly be happy to help you.
    I regret the Inconvenience caused,
    Based on the Information provided, I am afraid to state that the Belkin software doesn't support MAC OS X Lion 10.7. As there are no drivers for it. We are aware of this issue. Our Engineers are working on it. We do not have any update about the new release for MAC OS X Lion 10.7. However, will keep you updated if there's any.
    Should you have any further questions, please take a moment to review our Knowledge Base at http://belkin.com/support
    Please ensure that in order to reply to this email, or access any attachments, you must follow the link shown above and click 'update' at the bottom of the email to be able to respond. Do not reply to [email protected] as we will not receive your email.
    Thank you,
    Mousin M D
    Technical Support Agent
    Belkin Technical Support.

  • Time capsule now does not work with Lion just installed.

    Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?

    Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
    If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
    In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords.

  • Entourage does not work with Lion

    After installing Lion, the icon of Microsoft entourage is crossed (mail programme). After opnening the message " this program does no longer work, powerpc programs are not supported...We also work with Mail, but have lots of files in entourage that we need. Can someone help? Thanks.

    I have been running 2008 under Lion for a couple of months now. I never went to 2011 because they dropped a lot of features that I and my office used collaboratively (redirect, projects, etc.)..and a few other reasons.
    So I decided to be the guinea pig and try 2008 under Lion. It does NOT require Rosetta. It will run.
    However it's supremely buggy. Frequently crashes especially on clicking on HTML emails with heavy web-encoding within the email. Restarting will fix this but it sure is  annoying.
    Much more annoying is a definite stop and spin of the 'beachball' that happens on a regular basis. I wasn't getting this with Snow leopard so I don't believe it to be time machine interfering. I'm suspect that Versions is trying to help 2008 somehow. I've learned not to force-quit it but instead go do something else in the finder and eventually it will come back.
    Under Snow Leopard and Leopard I had a lot of issues with duplicate contacts, messed up contacts, and corrupted contacts. People in our office could never share a contact's VCF file without the email address having an extra space randomly inserted into the email. Office's website identified the problem only by showing other people's complaints. But there was never a solution.
    These annoyances plus 2011's faults will probably finally drive me to Apple Mail. It's a shame. There's a lot about 2008 Entourage we really like.

  • I have the new IPad and the sound does not work with games but works everywhere else, any clue?

    IIiiiiii

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

Maybe you are looking for

  • File sharing problems with my Media Player, an A C Ryan

    I have a media player, an A C Ryan, hooked up to my wifi at home and it normally accesses all my hard disks that is plugged and shared on my iMac. I had no problems when the iMac was on Snow Leopard. Under Network/Workgroup in the AC Ryan's menu, I c

  • Reloading footage doesn't refresh the footage's color profile

    Hello. I have a PSD with lots of layers loaded into AE. The PSD originally had Adobe RGB embedded. After doing animations I converted the PSD to sRGB and added a couple of new layers. When I load the new layers into AE they have the right profile (sR

  • Connecting to netgear WG111v2 wireless network

    My daughter has come home from college with her Macbook Pro 17/2.4CTO which she bought in September. At home we have a Windows Vista PC, running Netgear WG111v2 wireless network. The Mac can see the name of the network, but can't connect to it. We ar

  • Sql server configuration manager remote procedure call failed(0x800706be)

    Hi, My Sql Server Management Studio working well. But When I open Sql server configuration manager I Got an error "Remote procedure call failed (0x800706be)" I tried Goggling the problem and solve it but I am not getting any valuable solution. Is any

  • Why is there no plug in capability for"built in audio out"?

    This feature is long overdue and needs to be added. Most films have too much dynamic range for home viewing and A simple stereo plugin could solve this nicely. Also multi band eqs for our environments might help many of us. Please add this important