Have my Keynote quibbles been fixed?

I'm wondering if 09 has fixed my two major issues with Keynote:
1. Can the slide be seen centered in the work area rather than stuck top-left?
2. Has the bug been fixed where exporting to Powerpoint fails when there are speaker notes?
Thanks

Regarding #1. Easiest work-round I've found to the problem of starting motion paths to the left of slide edges is:
1) set up the motion effect with the object you're animating starting at the left edge of the slide.
2) then select object and use inspector to enter a -xxx pixels position to move the start of the motion to a point 'off stage left'.
A bit clunky but reasonably quick to do. Do you know any other workround?

Similar Messages

  • Have the Controller Assignments been fixed?

    Ok, while I'm waiting for mine to arrive, if anyone out there is familiar with the (many) bugs in the handling of controller assignments, can they tell me whether these have been fixed in LP8?
    Or are the same issues still there?
    A reliable controller assignments window is the one thing I've most wanted since the dawn of LP7...
    Cheers mateys!

    Controller assignments includes quick access, control surfaces and now MIDI key commands in addition to the learn controls functionality. The whole nine yards of wax enchilada balls.
    My specific problems relate to th controller learn to plugins functionality, and basic buggy operation of the window itself (for instance, clicking on cancel in one of the reassignment warning dialogs will just delete all of your assignments.)
    Ok, here's a long post - I haven't exhaustively through this stuff with LP8 yet (too depressing) but I did verify that the core bad behaviour still exists identically to LP7.x...
    Ah slippery haddocks, I would post the feedback I sent to Apple, but I can't find a local copy - I posted it to OSXAudio so I usually retrieve it from there but the site is down at the moment - when it comes back up, I will get it and post it...
    As a quick general example, I have eight sliders I want to map to softsynth controls - let's say the GB synths, because they have limited controls. So I open the first one, and map the eight controls to my eight sliders. Cool. Works fine. I then load up the next one, and map those eight controls to my sliders.
    This is cool, because whatever GB instrument I load in the instrument slot, my controller will control the 8 parameters I want.
    I keep going. At some point (which is random), the odd learned control will just stop working - ie, after I've learned maybe 6 or 7 instruments, a random control on a previous instrument just won't respond. If you try and "fix" it by relearning the control, sometimes it works, sometimes it doesn't. Sometimes it just means other controls randomly stop working.
    Worse still, when you twiddle a control to see which parameter it's assigned to, the incorrect assignment is called up in the controller assignments window, so you just don't have a clue what's going on.
    There are plenty of others, but basically, setting up controller assignments works for a few simple things, but it corrupts and becomes a major pain very quickly.
    It's a shame, because I was developing an awesome controller config, where I had buttons on my controller that would switch modes between mixer, instrument, plugin settings and so on, and I always had the most important parameters of all my plugs under my fingertips.
    Except for Logic's randomly flaky corruption which rendered the whole thing pointless (as you never knew what was randomly going to stop working).

  • Have any heat issues been fixed in the new MBPs

    I'm interseted in buying a new MBP. Does anyone know if any of the heat issues been fixed in the latest MBPs? And are the GPU's still underclocked?

    Nicolas, I've got a week 12 MBP and have never considered it to have a heat problem.
    Just made another 15 minute run of System Load with both CPUs at 100%. The CPU temp momentarily hit 78 C, then the fans kicked in (quietly) and the temperature stabilized at 73 C.
    The current CPU temperature is 51 C, which is normal for routine writing, Web browsing and downloading to my database. When I'm doing database work that frequently but for only brief bursts pegs the CPUs, the temps run in the high 50s to low 60s C. On battery power, the temps drop several degrees C.
    The computer remains comfortable to use at all times. Note: I use it on an aluminum tilt stand, whether on my desk or in my lap.
    Haven't done the "grease fix" and don't plan to.

  • I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

    I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
    I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
    Thanks!

    Links should not create any problems in Keynote.  If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
    Try this repair for Keynote,  ensure you complete all the tasks and in the order shown:

    delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application

    empty the trash:  Finder > Empty Trash

    Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4  
    Let the Mac fully boot up, it will take longer as the OS is repairing the drive

    when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions

    when complete, restart the Mac normally, Apple menu > Restart

    install Keynote from the Mac App Store
    let us know if this helped

  • I have several keynote presentations on my computer but now am getting the message that the program cannot be installed "because of a problem." All this started when I bought microsoft office for  University (2011). What is the problem and how can I fix

    I have several keynote presentations on my newish computer but am not unable to open them. I get the message "keynote cannot be installed because of a problem" (unspecified). Does anybody know why this happend? Does it related to using Microsoft "University"  2011? How can I fix it? Thanks!

    Thank you for your reply.
    I just tried the 3-step process suggested on http://support.microsoft.com/kb/2431353
    This all started when my mouse/thumb clicker was going crazy. Found an expanded battery. Obviously need a new battery. Unfortunately must wait 6 weeks to get my new battery. Meanwhile, I'm running my computer on AC only, as there appears to be no other option. I was informed that when using AC only (no battery) some high-energy-use programs like Office might not function.
    Do you know if there is away to use office even when just using AC and not having the battery in? I'm doubting if I have other OSX problems because everything else works: email, safari, itunes, iphoto, quicktime, etc . . . . ?
    ciao,
    Masego

  • HT1414 Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work. How can I get Firefox working again?

    After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.

    After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.

  • I want to update to 10.9.2 but i have read that it breaks AirPlay extended desktop over AppleTV. Has this been fixed?

    I want to update to 10.9.2 but i have read that it breaks AirPlay extended desktop over AppleTV. Has this been fixed?

    Try resetting PRAM.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Best.

  • Have snippet bugs been fixed in RH8?

    Hello All,
    I have noticed a few bugs associated with using snippets in RH7, such as the snippets disappearing from the Snippets Pod once in a while, and bullets not rendering correctly in design view, to name a few.
    I was wondering if anyone knows if these problems have been corrected in RH8?
    M.S

    May I add to this list please?
    In FCP7...
    1-are motion tab keyframes now cut & paste enabled?
    2-has the VO tool input instability been fixed
    Reading the What's New page for FCP7, it seems like FINALLY some basic stuff has been sorted, hooray! (even if its long overdue...)

  • I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.

    I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.
    Artist: Imagine Dragons
    Album: Night Vision

    Report it here:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Have Melodyne/Rewire file bugs per Logic 8 been fixed?

    I'm about to do a clean install of Leopard on my system drive (and the online upgrade to 10.5.3), followed by installation of Logic Pro 8.0.2 and Melodyne Studio 3.2.2.2. Trusted users on this forum have reported problems with Logic following installation of the Melodyne Bridge and/or Rewire files.
    I'm wondering whether these bugs have been fixed and whether the Melodyne Bridge is now working and crash-free in Logic 8 -- assuming one is running Melodyne 3.2.2.2 or, according to the tech at Celemony/Melodyne, any version of Studio 3.2.2.0 or later.

    The problem is nothing to do with Logic as such. The problem is with the Melodyne Rewire stuff on Leopard.
    I think Celemony have a forum - might also be worth asking over there. I know they have issued an update recently, so they might have fixed it...

  • HT3775 I have a video file (mp4) that was corrupted. It has been fixed by an online package but I still can;t open it. ANy suggestions?

    I have a video file (mp4) that was corrupted. It has been fixed by an online package but I still can't open it. Any suggestions?

    What are you using to open it?

  • Have the drop-down menus in Muse been fixed?

    I recently had a problem with Adobe Muse (Case #0183888983). I was emailed the information that the problem, malfunctioning drop-down menus in my site, had now been fixed. In the meantime I decided on my own to access an earlier version of Muse through Time Machine and then re-save and publish the Muse site with this earlier version. I'm afraid I don't dare open up the Muse site in this fixed version in case it doesn't work as described, and then I have to go through the tedious process again. So there's no way I can tell if my site would function with the new fixed Muse. The next time I create a new site, I'll be able to determine whether the bug has been fixed.

    Muse 3.1 did fix a couple of issues with menu bars.
    http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html
    If you could be more specific about the problem you were seeing, someone could probably confirm if 3.1 fixes it.

  • After updating Firefox, the "What's New" page doesn't say what bugs have been fixed

    I updated from 3.6.9 to 3.6.10. When restarted, Firefox displayed this page: http://www.mozilla.com/en-US/firefox/3.6.10/whatsnew/
    Supposedly it describes what's new in 3.6.10, but all it has is what's new in 3.6. Nothing about what bugs have been fixed.

    This is only a chemspill release to fix a crash.
    *https://wiki.mozilla.org/Releases/Firefox_3.6.10
    *https://bugzilla.mozilla.org/buglist.cgi?quicksearch=ALL%20status1.9.2:.10-fixed

  • 5800 - have ANY bugs been fixed?

    My 5800 has a few problems.  It is 7 months old and still under warranty.
    The firmware is v30 and since the update I've noticed the following:
    - alarm clock bug - alarm and snooze don't go at the time set.
    - internet browser drops and closes whilst surfing.
    - streaming real player radio is very intermittent and keeps buffering or drops out completely.
    - display locks and 'black' screen during real player streaming.
    I may have other faults not yet noticed but my question is, are the above problems actual faults AND can they be fixed forever.  I don't want a hard reset or re flash for the bugs to return.  I've spoken to Nokia who say send the phone to the care centre but I don't want a yoyo phone back and forward with bugs that Nokia have yet sorted.  I understand v31 isn't any better but I cannot update to that here.
    I don't want a phone with problems and am at the stage I want to reject the phone as not fit for purpose but Nokia say they can fix it.
    Can they??  Have they?

    Hmm, well the only issue I have with the 5800 is the same one as the above poster said. The phone doesnt handle this website very well, but it does work very good on other websites. For one thing a lot of the bugs has been fixed as the only bugs I've ever encountered is the Nokia Forum bug and the sometimes closing of the browser. However its seemed that the browser problem I was having is related to the signal strenth of the wifi spot  was in, so no biggie. Also, Opera Mini 5 is a phone saver in terms of the web browsing experience.
    All in all the phone is awesome.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

Maybe you are looking for

  • MB5B-Retrive Closing Stock into our General Report

    this is parameswar,    > Using MB5B tcode how to import the Closing Stock value in our General report.    > In which table the closing stock value is saved this is value should be equal to the MB5B    > is there any way to import the that value in ou

  • Each Table in new tab sql developer 3

    I remember having this on sql dev 2, but I just can not find this settings now. How achieve this behavior on 3?

  • Colon In  MSS Address Field

    Dear All, We are implementing MSS. Under Team Information -->Employee Information --> general Information >Personal Data iView, the address lines contain a " : "(colon) . When I check the application in the Content Administration>Web Dynpro>mss~eepro

  • Cannot get LR4 to read xmp files from a Nikon D4, Reads the D3S xmp files fine.

    I am doing some editing work for a magazine. The lead editor had issues with adobe camera raw viewing some of my edits. The xmp files are there but for some reason they are not loading. We narrowed it down to just the Nikon D4 files. I just had her d

  • Connect to Business object

    Hi, Can we able to connect our SAP with Business object(BI tool). If so tell me the procedure plz. Thanks in advance. From Kumar.