Have new internet provider, now my Apple Email doen't work...Help!!!!!!
I recently moved to a new state and have a new internet provider (AT&T - yuck)...
And my email for my Apple account doesn't work, I get this message when sending a message:
Enter Password for Account
"smtp.att.yahoo:bretbennett"
The SMTP server “smtp.att.yahoo.com” rejected the password for user “bretbennett”
Please re-enter your password, or cancel.
Please help me, anyone.
Sounds like your Mail setting may need fixing. Have you tried
http://www.att.com/esupport/article.jsp?sid=KB401738
Similar Messages
-
New internet provider, now mail won't work
I recently moved to a new city and have switched from Sympatico as my internet provider, to Eastlink. Since the switch I cannot send mail from the Mail program.
Neither one of my email accounts is a sympatico based account (one is gmail, one is a work address with a smaller provider), but I'm wondering if the switch could be the issue since I've never had problems before. I have run a connection doctor and the only account the comes up with a problem is the W3 Connex service provider, both the gmail outgoing and incoming mail server claimed to be working fine (but still I cannot send msg with this address).
Do I need to set up my SMPT server to correspond with my new service provider or with the email providers? This is really frustrating as I cannot send anything with my work address and have to log on to Gmail's web page to send anything with that address...
What the **** is going on?For every new internet provider, if you want unauthenticated e-mail sending you usually must use the internet provider's own SMTP server. Most internet service providers these days don't allow third party SMTP servers without some form of authentical and/or special port addressing. If you have a particular sendmail server you want to use regardless of your location, check with the owner of that server whether they use port 587 or 2626 and use e-mail address and your e-mail password to do password authentication into that server. That will allow you to use it anywhere. The primary reason they do this is to avoid being blamed for spam.
-
Cableone, our internet provider, has changed from a Google server to their own server and now my Thunderbird email will not work. They have directions listed to make it work, but this does not work. I have also contacted Cableone's technical support and they say because thunderbird is not their system they have no responsibility to make it work. I prefer to use Thunderbird for my email - how can I make it work? Also, I have tried the Thunderbird 'Automatic Account Configuration' help and it does not work.
Ask your less than helpful provider for the server settings and setup the new account up manually.
You want to know IMAP or POP and the name of the server. The port number and if it uses SSL/TLS security.
You need the same info for the SMTP server for outbound mail. -
I have just changed mt internet provider and cannot get my apple tv to work now!
Welcome to the Apple Community.
Changing your ISP may cause some issues but not so far as I am aware a problem with it connecting to your TV.
Have you changed anything else, what troubleshooting steps have you taken so far. -
Hi there
I have changed to a new internet provider, and they configured my router (which was working fine previously with my Apple devices)
It is a D-Link router, and it is connected to the internet via PPPOE. (previous provider did not have this PPPOE configuration)
The technician did the configuration and the Wifi works fine for all my devices including laptops, and friends who use Android.
My Iphone, Ipad, and my friends' ones are the only things that seem not to work correctly.
They can find the network on the router. It then connects for a short time, then either after a few mins of browsing on Safari, or any attempt to download an App or update an App, it fails.
To summarise - All non-apple devices function fine and connect to router. Apple Iphones and Ipads find and connect to Wifi, but the internet works temporarily on browser, and any App update or download will fail. (Wi-fi remains connected)
I am hoping it is a simple router configuration issue and the installation technician missed something. Has anyone ever come across this?
what I have tried - Rebooting router, restarting Ipad, resetting network settings and other things, but I am almost certain it is a router configuration thing.
Just hope someone can help, because I have called my internet provider and if they will charge for a call-out if they find it is not ''their fault'.
Really really appreciate any answers to this one.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
When first registering with iCloud at the Apple store I had to provide a non-Apple email. How do I now change that email on iCloud?
Your iCloud login is an Apple ID, and if you go to http://appleid.apple.com you can change the ID to another non-Apple email address that has never been associated with an Apple ID. You cannot change it to your @icloud.com address.
-
Just moved and have new internet WiFi provider and can't get my time capsule set up.
Just moved and have new wifi provider and can't get my time capsule to work with it.
The TC is designed for ethernet WAN connection .. it will not work with wifi provider.
-
I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?
Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off
-
I just updated to the new software and now my app Store is not working It is just a white blank page
I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?
I'm having a similar problem.
New iPad with iOS6 just downloaded.
I cannot purchase any new items from the new Apple Store now!
It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
This is not good Apple!!
Looks as if I will have to use my iPad One to purchase from the Apple Store. -
Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.
Hello Rickpoulette,
The following article provides further information and could very well help get your Apple TV and your television cooperating again.
If HDCP authentication does not succeed, you may see one of the following symptoms:
A message may appear on your television stating "This content requires HDCP for playback. HDCP isn't supported by your HDMI connection."
You may see periodic bands of static, or full screen static, flashing across your TV screen.
If you are experiencing either of the symptoms above, try playing the same content again for at least another 10 seconds. If the issue persists, try the following steps until the issue is resolved:
Connect your Apple TV (2nd generation) directly to your HDTV using an HDMI cable.
Set your Apple TV and HDTV to off or sleep mode
From the Apple TV interface, select: Settings -> Sleep Now.
Turn off your TV and wait for about 10 seconds.
Turn your TV back on.
Press the Select button on your Apple TV remote to wake your Apple TV.
Some HDTVs may need a firmware update. Consult your TV manufacturer's user manual or online support pages for additional information about how to update your TV's firmware.
If available, try using a different HDMI to HDMI cable, such as an Apple HDMI to HDMI cable, directly between your Apple TV (2nd generation) and 720p HDCP-compatible HDTV.
Apple TV (2nd generation): About Apple TV and HDCP
http://support.apple.com/kb/HT4428
Cheers,
Allen -
How can I do mirroring of a screen from new iPad to hdtv using apple tv and still work on something else in my ipad
You don't. Mirroring is duplicating your ipad screen on another projector - so you can't have another app going on your iPad without it also showing up on the projected image. Some apps are designed so that you see a different image in the iPad than the mirrored out display, but even then you're within the app itself.
-
HI! Firefox ask me to do update, and now ia have 4,0 but now my laptops touchpad scroll not working? i have lenovo t61 and i m useing xp. What i must to to
Hmmm, Norton extensions are broken again in Firefox 4.0.1. It seems that Norton didn't allow for Firefox 4.0 security updates when they updated their Firefox extension for Firefox 4.0. Norton says they'll have a fix in two weeks. A Norton user posted a fix in this forum thread.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788 -
Yesterday I used my iphone in the rain. I think some water must have got inside. Now the phone seems to be working OK but is not backlit so is incredibly hard to read. Is there anything I can do to reset or have I ruined the phone?
What you should have done is immediately turn the phone off, then put it in a ziploc bag of dried rice after you wiped all visible moisture off the phone. Leave it in the ziploc bag for 3 ~ 4 days, then turn it on & hope things work OK. It may be too late to try the dry rice trick now, but you can give it a shot if you like.
Apple does have an out of warranty replacement program, cost in the US is $199 for the 4S & $149 for other models. -
My security questions aswer neld to be reset bye emaill but wont work help me pris
my security question aswer neld to be reset bye email but wont work help me
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contacting Apple for support or
Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
Account Security.
3. Rescue email address and how to reset Apple ID security questions.
How to Manage your Apple ID: Manage My Apple ID -
The internet provider reset my router and now I cannot use Apple Tv. I tired restore and reseting the apple tv and the Network test is fine. Netflix shows error atv-ui10 and you no movies come up it just shoes black tickets at the top of the screen and says i am not connect. Internet works fine.
Delete/forget the network connection on the ATV and reconnect to the network.
Power cycle the router.
Maybe you are looking for
-
Intermittent mssql4 Connection Pool Failure problems
Ocaisionally we are getting the following error: weblogic.jdbcbase.mssqlserver4.TdsConnection.registerOutgoingPipeline(TdsConnection.java:414) at weblogic.jdbcbase.mssqlserver4.TdsConnection.registerPipeline(TdsConnection.java:430) at weblogic.jdbcba
-
BW Stock Values (0IC_C03) by batch
Has anyone successfully gotten stock values to display out of InfoCube 0IC_C03 at the Batch level? I've reviewed OSS note 589024 and will continue to study it, but it isn't clear to me if this is possible. Stock values are correct at the plant-mater
-
Missing Calculator in Organizer
Hi, I have a problem with my phone. I have Nokia 6288. I cannot found my calculator application in the Organizer Folder ? Are there anybody can help me ?
-
I have two tables: TABLE: users (user_is is primary key): ++++++++++++++++++++++++++++++++++++++ user_id | username 1 | fazle 2 | newaz 3 | shaerul 4 | badsha 5 | mirmohsin 6 | mdmohsin 7 | shawkat 8 | ahsan 9
-
Enhancing a line using Magic Wand
We don't use Photoshop a lot, so this may be a simple question but I've been unable to get something to happen. I have a transparent GIF file, which outlines a series of counties in my state. It is just a thin black line outline of these. This is a