Have "OK to DiscoTried to reset, didn't work. Any other options other than restoring?
Have "OK to Disconnect" frozen with low light backlit. Won't turn off or able see any files. Tried to reset, didn't work. Any other options other than restoring?
By a reset, I assume you mean pressing and holding both the Select (Center) and Menu buttons together long enough for the Apple logo to appear? Is the hold/lock switch in the On position?
If you cannot get the iPod to reset, your only other option at this point is to just sit and wait for the iPod's battery to full drain. Then charge it back up and restore in iTunes if necessary.
B-rock
Similar Messages
-
Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???
Fixed it. It is on Chevrolet's end. Press config to access the configuration settings. Turn menu/tune knob to highlight vehicle settings. Press menu/tune to select the vehicle settings menu. Choose return to factory settings.
-
I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?
When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
Here is the longer version I've been compiling:
Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
http://support.apple.com/kb/HT5446
Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
I have sourced some additional information here:
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report > Serial ATA and the drives should show up as discrete drives with their info listed separately. -
I have tried Apple's reinstall, it didn't work. There aren't any other devices in any USB port. Using the same USB connectorcable and port, my computer and iTunes will recognize my friends exact same model of iPod touch (4 gen). Any help? It is a new iPod, never before connected to any computer.
Yu can try placing the iPod in Recovery mode and then try restoring via iTunes. The problem is that if you can't restore your iPod may be bricked
Next would be to try DFU mode. this may also brick your iPod if it can't be restored.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Make an appointment at the Genius Bar of an Apple store. -
If i payed to have money in my count,why didn't work to update my games after you bought them?
If i payed to have money in my count,why didn't work to update my games after you bought them?
Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013. -
My iPod Touch is frozen on the iTunes music note logo and the USB plug picture. Tried resetting - didn't work. Tried restoring - didn't work. Any ideas besides throwing it out my window?
Does the iPod/iTunes go through all the steps of restoring the iPod? If yes then:
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Above from:
http://support.apple.com/kb/TS3694 -
Camera Roll is missing. I have lost the Camera Roll section in Photos. Any idea how I can restore Camera Roll . I am using an iPad 3 with OS 6.01 Thanks!
Hi,
Thanks for your help.
I have discovered that Camera Roll reappeared when I took a pic using my iPad camera.
Previously I had not done that. Stupid me.
Your attempt to help me is much appreciated.
Thanks.
C.H.2 -
just downloaded ios6 on my ipod touch and lost all color when I select an artist or song how can I get it to be blue again tried resetting did not work any help offered would be liked
You need to restore.
Everything should be on your computer, so you can just sync it back.
iPod touch User Guide (For iOS 4.3 Software) -
Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?
If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then. -
We have 2 locations using formscentral one location is working fine but the other location is experi
We have 2 locations using formscentral one location is working fine but the other location is experiening slow response (up to two hours) or the form not displaying? What should be looked at?
Thanks
CarleenCan you describe what you mean by "experiencing slow response"? Do you mean that you don't see the new responses as they come in? Does it takes up to two hours before they show up in the View Responses table when they show up immediately at your other location? And what do you mean but "the form not displaying"? Are you talking about the fillable form or the editable form in FormsCentral?
Can you please add me as co-author ([email protected]) of the form so that I can investigate on my side.
Instructions on how to share can be found here : http://forums.adobe.com/docs/DOC-2462
Gen -
i have a white screen on my computers. I tried resetting it and it worked for a few minutes until it was put to sleep and then went back to white screen when i turned it back on. I tried resetting again and it did not work. I then did restore for itunes. it didn't work. was wondering if i did restore, as a new phone set up in itunes will i loose my contacts. just want to make sure before i try in the event i have to buy a new phone want to be able to have the information to transfer.
restoring as new does just that. It will wipe your phone clean just as if you just bought it.
If you've been using your iPhone as recommended, you've been synching your contacts to your computer to a contact manager such as Outlook or Address Book, or you've been synching your contacts with a cloud service like MobileMe or Google. Your contacts should be safe in one of those locations. -
Dear All, the backspace and enter keys on my wireless keyboard suddenly stopped working. Im using OS 10.7.5 and have tried a PRAM reset which didn't work. I also used the keyboard viewer to see if the keys worked on that but they don't. This is driving me mad, can anyone please tell me what to do? It happened just after an update but this could be a coincidence. Thank you for your time
For my computers, though some of them support BlueTooth devices and accessories,
my preference and economy of standard, is to have wired USB and also use powered
USB hubs for accessories.
I've used USB wired keyboards and mouse products; and some I've bought from the
original owners who had upgraded to BT, and never used the new Apple USB model;
so I have spares of these on-hand since they seldom fail, but do work when BT won't.
{A SMC reset should not cause a problem, or seldom has; but can solve some.}
In my opinion, the wired USB keyboard is an essential accessory, if not a necessary
primary means of user access on a continuous basis. At least until the wires fail...! -
I started out just simply trying to update my iphone 5 to ios 8.2 and it got stuck on the itunes plug in screen. I had to wait till then next day to ask my boyfriend to fix it because I have a chromebook and it can't get itunes. He did everthing apple told us to on the website, and it didn't work. We tried to reset the phone and that didn't work so we did the next thing, and tried to do a restore on itunes. However when did that it wasn't working so we put my phone into DFU and tried to do a factory reset. But, it didn't work and my phone ended up just turning black. I can see the back light on the screen (the light stays up like normally when you turn on the home screen) but, there is no logo or anything. Is there anything I can do to save my phone??? Please help. If you need anymore info let me know!
The Problem is resolved by :
Click on the "Start" button. Click "Run." Type the word "cmd" in the open box. When the DOS screen comes up, type "netsh winsock reset." Press "Enter." Type "exit" to close the DOS window and go back to Windows.
Restart the computer.
Thanks to my friend Sunil.
Read more: http://www.ehow.com/how_2125133_do-winsock-reset.html#ixzz2kyccghec -
No Battery; Power Source: Battery. SMC Reset didn't work.
Hey guys,
Ok, so I spilled a small amount of water on my macbook on Halloween. I didn't know what to as usually I am very careful and this has never happened before. The MB continued to act normally, so I cleaned it up and turned it upside down and tried to get all the water out. I also sprayed ino the vent with compressed air (later found out that was a stupid idea). Anyways, I turned it off then closed it up and went back to it about 5 hours later. There was condensation on the screen and it wasn't turning on except with the battery cable removed from the logic board and the magsafe plugged in. Even then, the keys weren't working. So I took the MB completely apart and replaced the keyboard after finding no water evidence or corrosion. Once reassembled, I plugged in the magsafe (which had a dim light) and tried turning it on by pressing the power button, just like regular.The battery indicator lights on the side of the computer also were not working. The fan turned on on high speed and the startup noise sounded, and the screen started to light up, but then it would almost instantly stop. It did this twice. I then started it into disk utility, which said there were no disk issues, so naturally I didn't repair anything. I then shut it back off and started it in safe verbose mode. It started up (fan still running high speed) and went completely to the regular desktop screen after letting me log in and everything. Everything on the startup screen was normal and nothin was wrong with the display as far as flickering or anything, except that the battery icon had an X in it and when clicked on, said "no battery available", and then "power source: battery." Since the fan was still running full speed though, I shut it down again and did the SMC reset, which fixed the issue with the fan and the Magsafe indicator light, but not the battery indicator lights or the battery icon issue(battery not being recognized?) When I option click on the battery icon also, it says the condition is normal, however it still says the whole no battery available/power source: battery. I'm curious to know if I should try perhaps resetting the SMC again since it helped the first time, or if I need to buy a replacement battery. The Mac Chat person also said that it might be the battery sensor on the logic board, which I'm extremely worried about because I cannot afford to replace the logic board. Is there any kind of test that I can do/run (besides trying to see if a new battery works) to see if the logic board is working properly? I'm not very well versed in computers, so it seems to me since everything else was working fine, the logic board might be ok? I suppose that specific sensor might be messed up and nothing else, but I would just think that other things might not be working also if it was a logic board issue. Also, does anyone know where this sensor might be located on the LB? Perhaps I can check it out? Thanks in advance everyone.I'm sorry, I think I left out that I took the computer apart after it wouldn't turn on the first time (about 5 hours post spill) and specifically when I put everything back together.
I took it apart about five hours post spill and cleaned it thoroughly and found no water except for a few small drops sitting on the optical drive. They were on the plastic housing of the optical drive (the side facing the bottom of the MB) and didn't not infiltrate the drive itself. There was absolutely no water elsewhere. There was evidence of liquid in the form of corrosion on the inside portion of the ir sensor near the hard drive, which was quickly cleaned with alcohol. There was no corrosion elsewhere. Again, each and every component (LB, OD, HD, battery, backlight & keyboard assembly, speakers, microphone, wireless card, etc) was dismantled about five hours post spill and cleaned/inspected for water damage and was left in the dismantled state in an aerated area until I received the replacement keyboard today and put it back together (which was today). So taken apart/cleaned on 10/31 and put back together on 11/15.
The closest Genius Bar to me is about four hours away and I cannot afford to send it in or drive there only to hear them give me an astronomical charge primarily just because they are the ones servicing it and I cannot afford a new LB if that is also the case, so I'm hoping that someone may know any answers based on the information provided that perhaps I didn't seat the battery correctly, or that I need to redo the SMC reset, or buy a new battery, or that there is some sort of test I can run through the computer that can show me how the LB is working. If there is such a test, then I can find out if I need to give up hope or not and stop trying all these other things or if it is reasonable to perhaps buy a battery or try the SMC reset again. I really don't want to go straight to it being the LB if hopefully that isn't the case.
If it makes any difference, I almost always kept the MB plugged in for the two years I have owned it and hardly ever let the battery die. I did not know about battery calibration prior to research for this matter and therefore never did it unless by accident (i.e., didn't have my charger with me and it died).
TIA everyone. -
The light on my appletv is blinking all all I get on ny TV is an apple symbol. I tried to reset it but it didn't work.
Welcome to the Apple Community.
If this is the Apple TV 1, you might try pulling all the cables for a few moments and trying again, but it may well be the unit has failed.
If its the Apple TV 2, get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
Maybe you are looking for
-
ICR File Upload Process 002 G/L Accounts
Dear SAP experts, For external companies, we want to upload their intercompany transactions in the intercompany reconciliation cockpit. But it seems that is not possible for process 002 (G/L accounts): indeed, when I go on the customizing step 'Compa
-
is there an app or a way to sync my iphone 3g with my 360 so I can stream music to my xbox to use in-game?
-
TS3694 error message when uploading new ios 6, now phone does not work..
USB pic on screen and phone wont do anything, itunes wont connect. I have updated itunes and restarted computer and still nothing....please help!!
-
Hi All, We have a requirement of displaying changes to IBAN(International banking number ) of a vendor. We need to display the old value as well the new one.We are following : 1.Getting details from CDHDR for Change doc object = KRED
-
Cannon printer driver wont install
I cant get my cannon d420 image class printer to in install on my new computer running windows 7