Have Pavillion g7-1075dx running windows 7 (64-bit). SMART Hard disk error comes up on startup.

I've run the hard disk test and is says hard disk 1 failed. tried system restore twice comes up with same error. What are my options. I do not have a recovery disc

Hi,
You may well need to replace the Hard Drive.
Is your notebook still under warranty?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error

Product: HP Pavillion dv5
Operating System: Windows 7 64-bit
Problem: Smart Hard Disk Error
Disk Name: WDC WD3200BEKT-60V5T1
How do I fix this error?

Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Smart Hard Disk Error on windows 7 notebook

I have a Hp Mini 2100-2190NR running windows 7.
I've had a problem recently where i could not boot windows. I got it fixed using a USB recovery disk.
When i start my computer i get a Smart Hard Disk Error message.
It says it has detected an imminent failure and to back up the content immediately and run the hard disk test in system diagnostics.
Once i run the tests, some got me errors and could not complete them.
I tried using a system restore back to a date and i was able to log into windows. The next day same problem occured and tried another system restore and nothing happened.
Im stuck at the black screen with the microsoft corporation loading bar.
How can i fix this problem?
This question was solved.
View Solution.

Hi,
The Smart error message would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the start-up issue.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error Disk

How do I fix Smart Hard Dtive Disk Error WDC WD3200BEKT 60V5T1

Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have hp 2000-299 wm notebook that failed the hard disk test. what can be done?

Message said: " SMART hard disk error. The SMART hard disk check has detected an immintent failure. To ensure not data loss, please back up the content immediately and run the Hard Disk Test in system diagnostics. Hard Disk 1 (301) F2 System Diagnostics ENTER-continue setup."
I ran the Hard Disk Test and the following message appeared:
"Testing Drive 1
SMART check: passed
Short DST: passed
Long DST: FAILED
Failure ID: UAGF7T-5SP669- MFKR4K-618MO3
Product ID: QE282UA# ABA
Hard disk 1
Hard Disk Test : FAILED
for more info... go to this website

Your notebook hard drive has failed, you need to get it replaced to fix your notebook.
If covered under Warranty, you may contact the HP Tech Support and have them ship you a replacement drive, or else you may purchase a new one.
If you would like to purchase a new Hard Drive, any of the below will work.
500-GB, 5400-rpm Part Number: 634932-001
320-GB, 5400-rpm Part Number: 622643-001(the one shipped with the notebook)
250-GB, 5400-rpm Part Number: 622641-001
You can contact the HP Support Team(Phone, chat, email) from the below link:
http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=us&dlc=en&lc=en&product=5166284

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works.

The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works. Cant use calibration tools as there's no response to touch. No option in control panal to turn on or off touch capability. I have no computer background so cant really get to technical. Is something simple turned on or off located in some mysterious place? F key or something? Bad machine? Thanks for any input. Sarah

http://www8.hp.com/au/en/drivers.html
I found the driver at the above link. I installed the driver, disabled my graphics card and rebooted. The touchscreen worked. Then I enabled the graphics card. So far so good. Hope I dont have to do this routine too often.
Good luck with it.

I have a new laptop running Windows 8.1. The 10.3.1 version downloaded, but it was incompatible. Then I tried to download Itunes 11.1.5 and it comes up with the box asking me to save. When I click on save...NOTHING happens. AAAAAHHHHH!

I have a new laptop running Windows 8.1. The 10.3.1 version downloaded, but it was incompatible with Windows 8 and 64-bit. Then I tried to download Itunes 11.1.5 and it comes up with the box asking me to save. When I click on save...NOTHING happens. AAAAAHHHHH!!! I even clicked on the download list to see if it is possessed and downloaded somewhere I didn't choose, but that's NOT happening either. Please help me! I have been messing with this and 4 other problems on this laptop for the last 32 hours. I'm getting tired and frustrated. Also, I haven't even put music on THIS Laptop because on my other one, I ended up with at least 5 copies of EACH SONG. Let's see 636 X 5 = 3,180 and they were in EVERY POSSIBLE LOCATION!!!
Thanks for your time,
Laura

See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
tt2

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

I have an old PC running Vista. in itunes on that machi9ne I copied ALL my CD's. I now have a new PC running windows 8.1. I would like to transfer that music to the new machine. Please help .

I have an old PC running Vista. On that machine, in iTunes, I copied ALL my CD's. I now have a new machine running windows 8.1. I would like to transfer that music on to the new machine in iTunes. Please help.

Read through these:
iTunes 11 for Windows: Move your library to another computer
iTunes: How to move your music to a new computer - Apple Support

I bought a movie on iTunes but when I try to watch it plays back slowly with no sound. Then the video will speed up and the sound will work for a moment then off again and back to slow motion. I have a dell laptop running windows 7

The description says it all. I bought a movie on iTunes but when I try to watch it plays back slowly with no sound. Then the video will speed up and the sound will work for a moment then off again and back to slow motion. I have a dell laptop running windows 7

Hi Normanwh,
If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Regards,
- Brenden

Does the Macbook Pro have a program to run Windows? If not, what is the best program to do so?

Does the Macbook Pro have a program to run Windows built in? If not, what is the best program to do so. Purchasing a new Mac.

No. The Mac does not have anything to run Windows
You must install either virtualizrion software or use BootCamp to create a partition for Windows. Once you have done that then you must install Windows.
Allan

I have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

Hello Sirving575, sorry but the metro version of firefox has been cancelled, see : https://blog.mozilla.org/futurereleases/2014/03/14/metro/
thank you

HT1926 I have a French computer running on 32 bits instead of 64 (Vista). Reinstalled several times iTunes but keep on having failure 42110!! No download available for 32 bits????

I have a French computer running on 32 bits instead of 64 (Vista).
Reinstalled several times the latest iTunes but keep on having failure 42110!!
No download available for 32 bits???? This is more an Apple support question!!

Try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I have a PC running Windows XP (yes an antique) with CS3 Photoshop and InDesign and lightroom 2 (yes all antiques). I have acquired a PC running Windows 7 with no programs. I also have a MacBook pro with full CS5 suite. The programs were already loaded w

I have a PC running Windows XP (yes an antique) with CS3 Photoshop and InDesign and lightroom 2 (yes all antiques). I have acquired a PC running Windows 7 with no programs. I also have a MacBook pro with full CS5 suite. The programs were already loaded with I got it as a gift. Question 1. If I find serial numbers used to download programs to the old PC, can those CS3 programs be put on the newer PC. Question 2. I really want to put CS5 suite on PC machines. Is that possible? Especially since my MacBook is showing some hard drive problems.

You should be able to get the CS3 programs installed and running on the new pc since CS3 is spec-ed for Windows 7 Service Pack 1. Downloading the programs does not require a serial number. You can find them here: Download CS3 products but you will need the serial number to activate the programs. You might be able to find that thru your Adobe account online.
You will not be able to install the CS5 Mac version on a PC and you won't be able to trade it to a PC version either due to it being an older version. Trades are allowed only for the latest version (CS6)

Have Pavillion g7-1075dx running windows 7 (64-bit). SMART Hard disk error comes up on startup.

Similar Messages

Maybe you are looking for