Have pc with 2 nic cards. One is for network and the other is for testing hardware communication.

As the unit communicates with test software it generate data output that needs to go back to pc hard drive then the program copies the program over the other nic to a server shared folder.
But as of recently if test unti is off then the network is fine and see all mapped drives.
But once I turn on the test unit then the mapping is gone and will not be able to map drives at all.
Must then turn off test unit then reboot to get mappings back.
What has happend? Why does this now happen after visiting windows update? It makes testing the hardware impossible.

Hi,
It maybe something causes the mapping drives lost, you can use net use command to map your drives with persistent parameter.
If this doesn’t work, I would recommend to use process monitor to check what’s happened during your operation.
Alex Zhao
TechNet Community Support

Similar Messages

I have just purchased a macbook pro. I downloaded two sd cards, one via lightroom 4 and the other via iPhoto. I can't find the latter card when I try to import via LR4. In fact i can't find it at all unless i open iPhoto. where is it?

Good Evening, I have just purchased a Macbook Pro, and have downloaded two SD cards of a trip to USA and Canada last September. One via Lightrooom 4 and the other via iPhoto. I tried to import the SD card via iPhoto into Lightroom 4 but could not find it. I tried to find this "folder"? via other means with no success. however when I open iPhoto, there it is, so it must be on the Hard Drive somwhere??? I am new to Apple having decided to jump ship from Windows. Would be grateful for any help.

iPhoto is a - like Lightroom - Photo Manager. It's a database. Like any db to get data out you have to export it.
File -> Export
and in this case set the Kind to Original.
iPhoto is a $15 app, LR is somewhat more expensive. As they both want to manage the photos there's no good usage scenario where you use both. Pick one horse and ride, essentially.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Why do I have two installations of PSCC? One is PS-CC and the other is PS-CC(2014)

What is the need for two installs of PS-CC?

They are separate versions. Read the pertinent marketing blurb and the "What's new" timeline on the product page.
Mylenium

I have two iPhones, one is a 4s and the other is a 3g. I have not used my 3g in some time now. I recently restored it but I cannot use it without a sim card, it says i have to "activate it."

I have two iPhones, one is a 4s and the other is a 3g. I have not used my 3g in some time now. I recently restored it but I cannot use it without a sim card, it says i have to "activate it." I cannot place my iPhone 4s sim card in it (too small), and i do not want to get a new contract or sim card for an iPhone that i do not ues very much.

Thanks for your help, but i cannot borrow a noral sim card now, my family has all up graded to iPhone 4s's, i have done this before, but one of my family had the same type of iphone so i could use theirs. Now i am the only one who still holds on to their old phone... I am not sure about buying an adapter...

I have two excel files I cannot open or delete from my desktop. One is titled 6ACAD200 and the other file is titled 8D73A700. How can I get these off of my computer?

I have two excel files I cannot open or delete from my desktop. One is titled 6ACAD200 and the other file is titled 8D73A700. How can I get these off of my computer?

From the names I'd guess they are temporary files. If excel is running, quit and try again. If they still won't move or delete reboot. If they still won't move or delete...kill a chicken at midnight under an oak tree?

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

connect, then in SystemPreferences/Displays you can set the two as you want.

Can I sync two computers when one is using lion and the other snow leopard

can I sync two computers when one is using lion and the other snow leopard

will my data be shared well using Mobile Me?

I need to deactivate two old computers and reinstall CS3 on two new computers. How can I do this if one is long gone and the other just crashed?

I need to deactivate two old computers and reinstall CS3 on two new computers. How can I do this if one is long gone and the other just crashed?

contact adobe support and request an activation count reset, http://helpx.adobe.com/x-productkb/global/service1.html

VMware Tools -So which command do believe? One says version 6 and the other says 3.0.2?

Hi ,
Please check the output of the commands
[# vmware-config-tools.pl -h
VMware Tools 3.0.2 build-52542 for Linux configurator
..# vmware-checkvm
VMware software version 6 (good)
So which command do beleive ? One says ver 6 and the other says 3.0.2 ?
Thanks,

Hi ,
Please check the output of the commands
[# vmware-config-tools.pl -h
VMware Tools 3.0.2 build-52542 for Linux configurator
..# vmware-checkvm
VMware software version 6 (good)
So which command do beleive ? One says ver 6 and the other says 3.0.2 ?
Thanks,

How do I configure my PCI-GPIB cards so that one is a controller and the other is a device being controlled by the first card

I have 2 PC's, both fitted with PCI-GPIB cards. One will be the system controller and the other will be a device on the GPIB bus. How do I configure both cards using LabWindows/CVI v7.0 to achieve this ? What commands are used to send and receive the data ?

Hi Pete,
For the controller board you don't really need to do anything. By default the GPIB interface is configured as controller.
The non-controller can be configured in MAX. Right-click on the interface, uncheck the ono-controller box and change the primary address. It is usually a good idea to set these parameters programatically. Use ibpad to set the primary address and ibrsc to release system control.
For the controller you can use a device descriptor (using ibdev) or a board descriptor (ibfind).
You can only open a reference to the non-controller board using ibfind (ibfind("gpib0"), for example). This will open a board reference. You cannot use a device reference because that implies that the board is capable of addressing the bus. On
ly the system controller can.
Here are some links I found on the web on this subject:
Passing GPIB Control -- System Controller vs. Controller In Charge
Tutorial: Programmatic File Transfers over the GPIB
Example: Using a C Program as a GPIB Non-Controller with LabVIEW as the GPIB Controller
Example: Serial Polling Between Two Computers (Controller and Non-controller)
Hope this helps.
DiegoF
National Instruments.

We have the enterprise system on our office computer and I have one iphone and 2 ipads. One iphone and one ipad2 is mine and the other is my wife's. We share a common password for the ipads. How do I update to ios5?

I think this is rather complicated and I really need some help. I am the pastor of the church and we have the enterprise system. We use an exchange server if that means anything. I began with an iPhone 4 that connects with our system. And now I have to iPads. One of the iPads is registered in my name and the other in my wife's.
I'm confused as to how to update to IOS 5. Do I keep my password is the same for both my wife's and my iPad?
Also because we are on the enterprise system, my notes from Outlook do not wirelessly connect from my work computer to my iPhone and to my iPad. I have been told that they have not worked this out yet. Will this change with the new operating system?
It all is very confusing to me and I would appreciate some help. Thank you very much

I think this is rather complicated and I really need some help. I am the pastor of the church and we have the enterprise system. We use an exchange server if that means anything. I began with an iPhone 4 that connects with our system. And now I have to iPads. One of the iPads is registered in my name and the other in my wife's.
I'm confused as to how to update to IOS 5. Do I keep my password is the same for both my wife's and my iPad?
Also because we are on the enterprise system, my notes from Outlook do not wirelessly connect from my work computer to my iPhone and to my iPad. I have been told that they have not worked this out yet. Will this change with the new operating system?
It all is very confusing to me and I would appreciate some help. Thank you very much

I have two airport extremes, one acting as amodem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable. How do I know if they are operating wired or wirelessly

I have two airport extremes, one acting as a modem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly? I want to know as I assume I will get much better speeds if they are wired.

Hi Bob, many thanks for the prompt response. I think I did what you suggested, but you're the expert so I have sent over a few screenshots. The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time). My new home office is going to be in the garden, circa 100 feet from the main house. I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily. Everything works well, so I was surprised when I unplugged the ethernet, that it still worked. I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly.
Many
Thanks, Greg.

I have two gmail email boxes, one showing as Gmail, and the other is under my husband's email address. When I send from the Gmail box, the blank email has my gmail address, but when someone replys it goes to my husband's email box. Can someone help?

I have 2 gmail boxes on my MacBook Pro. One is mine and shows as Gmail and the other is my husband's which shows as his email. When I send an email, it has my email address in the From line automatically, but when someone replys it comes back to my husband's email box. How wo I fix this?

I have this exact problem. I have 3 email addresses on my mac and I can select one, and the email still be sent through another account and I won't know it until I get a reply for that email in one of the other accounts.
MacBook Pro, Mac OS X 10.9

Unity cluster with one node using name and the other using iP

Hey Guys,
I have two unity connection boxes setup in a cluster, one is know by name and the other by IP address. I'd like to change so that both are using the IP address. The node in the cluster that is using the node name is the publisher. Can I simply go into the cluster settings and change that to an IP address or will that cause big issues.
Thanks,
BR

Hi Brent,
Is there any specific reason why you would want to do this kind of configuration? (Just Curious to know)
I tried doing the same on my Unity Connection cluster (version 8.5(1) SU2 ) in lab.
After making the change in the cluster settings page for the Pub , I did the following :
1)Switch the Primary Role back and forth between the Pub and the Sub : SUCCESS
2)Checked the service status on the pub and sub using "utils service list" : ALL GOOD
3)Rebooted the Pub followed by the Sub and performed test 1 and 2 again : SUCCESS
4)Checked the output of "show cuc cluster status" on the Pub and Sub again: SUCCESS
However, I could not find any document that says this change is really required under any circumstances.
I hope that helps!!!
Regards,
Saurabh Agnihotri

I see two iphoto applications. One is iphoto (copy) and the other iphoto (original). How did this happen?

In the applications folder I see two iphoto apps. One labeled iphoto (copy) 376 MB/ version 8.l.2 and the other iphoto (original) 346 MB/ version 8.1.1 . Have no idea what I did. Can I delete one of them?
I have iphoto library manager installed and used it for the first time just recently. I merged my photos into one library.
Any help would be greatly appreciated.
Thank you,
Lucy

Keep the latest verson. But, as Larry cautioned, open it before deleting the other one to make sure it performs as expected.
OT

When I start Firefox 4 two tabs open one is my homepage and the other is "google toolbar updated", how can i stop the second tab opening?

I have google toolbar installed on my Firefox 4, whenever I start firefox two tabs open, one is my homepage gmail and the other is "google toolbar updated".
How can I stop the second tab from opening?

See these articles for some suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Have pc with 2 nic cards. One is for network and the other is for testing hardware communication.

Similar Messages

Maybe you are looking for