Have Photoshop Elements 12, recently purchased Epson Workforce WF-7620 Printer/scanner , cannot import scanned pictures into Photoshop, does not see the Printer/scanner.
How can I get my Photoshop Elements 12 to import scanned images from my Epson Workforce WF-7620 ?. The program does not recognise the Priner/scanner.
Bruce
Is it trying to get you to join photoshop.com? The easiest way around that is not to use the welcome screen. Go into the program files and make direct shortcuts for the organizer and/or editor and start PSE that way from now on. Photoshop.com is dead and gone so the welcome screen will hang up trying to connect to something that no longer exists.
Similar Messages
-
How to connect via Firewire/Thunderbolt adapter an Epson Stylus Photo R2400 printer to a new Mac Pro
When you switch from USB to FireWire, you have essentially installed a new (i.e., different) Printer.
In the Add-a-Printer dialog, delete[-] the existing Printer queue which is set up for USB. Then, with the Printer connected via FireWire, Add [+] a new Printer queue and it should set it up correctly this time.
To go back to USB, you would have to delete and re-add in a similar fashion later. -
My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.
hi
could you tell us what the other app is please -
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thankssgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for. -
I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!
If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader. -
I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?
Repair your disk permission: http://bit.ly/OeD7U3.
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website www.lexmark.com
Run firmware update http://bit.ly/AcNqbg
Reset printing system http://support.apple.com/kb/HT1341 -
I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac running Mountain Lion. I followed all recommendations in article http://support.apple.com/kb/TS3048#1. My computer recognises the alpha part, but it does not see the numeric pad. Any advice?
Hello:
I would try resetting the PRAM and SMC.
Barry -
I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it. I am using an AOL supplied router and have read reports that this can cause problems. Is this the case? How do I resolve this issue?
Hi,
That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
Bonjour Services relies on IP Multicasting which have to be supported by your network.
To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
Once the iPad connected to the Wireless Direct network try printing and check for any difference.
If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
Shlomi -
I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?
One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all. -
I am trying to connect a MacBook Pro to a network using a Linksys PLEBR10 USB ethernet adapter. The MacBook does not recognize the USB device nor the network behind it.
Anyone have a solution?
Thanks
AJBContact Linksys or post in their forum area.
-
Scanning pictures into photoshop elements 7
why won't my pictures scan into photoshops elements 7 at 4x6 and print at sizes i choose?
Lots of good stuff here about scanning:
http://www.scantips.com/ -
VBA code to import scanned images into Photoshop CS2 with TWAIN
Hi,
I have to develop a solution that automates the scanning of an image using the TWAIN driver interface. Once scanned, the image appears as a new document in Photoshop where it will be further processed using VBScript scripts.
The solution so far :
Using the freeware 'EZTW32.dll' (copied into C:\WINDOWS\System\), I am able to open the TWAIN scan dialogue on screen, using the function 'TWAIN_AcquireToClipboard(Me.Hwnd, nPixTypes) from the 'EZTW32' dll.
Once the image is scanned, the TWAIN driver is automatically closed, leaving the scanned image on the Windows clipboard.
I then launch Photoshop CS2 using a shell code :
(It is important that Photoshop runs minimized)
Dim strPathname As String
Dim lngShellReturn As Long
Dim appRef As Object
Dim newDocRef
strPathname = "C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe"
lngShellReturn = Shell(strPathname, vbMinimizedNoFocus)
Set appRef = CreateObject("Photoshop.Application")
When Photoshop is running, then a new document is created and the scanned image is pasted into the document from the Windows clipboard...
Set newDocRef = Documents.Add(8.268, 11.693, 600, "New Doc")
newDocRef.Paste
OK, this works up to a point. The newly scanned image appears automatically in Photoshop.
The big problem is that when the user makes a change in resolution or draws a selection box in the TWAIN dialog, this data is not recovered from TWAIN, so the image size parameters in the new document cannot be set.
A beter solution would be to write code that emulates the menu commands in Photoshop CS2:
File -> Import -> [Current Scanner]
that launches the TWAIN driver for the current scanner (the code must close TWAIN immediately after scanning). In this case, the resolution and image selection parameters are also imported into the new document.
I am currently refering to the Photoshop CS2 SDK. Do I need to request the Advanced SDK ?
Once beyond this point, then I think I can continue the image processing routines using VBScript as per the SDK.
Any help or other pointers to the TWAIN problem would be VERY APPRECIATED !
LarsPLEASE IGNORE MY PREVIOUS POST !
I have now fully resolved the TWAIN problem. It works perfectly and is very robust. I am now continuing with the batch image processing for the newly scanned images using the Photoshop CS2 SDK scripting documents, that I find very detailed, well written, and VERY helpful :)
Peace and love,
Lars -
So,
I have purchased a series of Top Gear on my Apple TV and want to watch it on my iPad. Since it is all 'in the cloud' I thought that this would be possible. I have read that you can go on the 'purchased' tab on the video app but that only have a film that I bought on itunes some time ago.
Is it possible to watch the TV shows on my ipad? If so....please help!! ThanksHi,
Couple of things:
1. There is no "purchased' tab in the Video app - it's in the iTunes App. Once in the iTunes app / Purchased tab select the TV Series view (top left). You should then see your purchases.
2. Not sure where you are in the world but I believe previously purchased TV Shows are only avaible for re-download in the USA, Canada, UK & Australia http://support.apple.com/kb/HT5085 -
Photoshop CC does not see the full RAM
I just installed Photoshop CC and I see in the performace that it only sees 3255 MB. But I have 32G RAM on my PC and Photoshop CS6 sees the full 32G of RAM. How can I solve this?
That's my guess, too.
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#BitMode -
Lightroom does not see the installed photoshop CS6
I have LR 4.1 and Photoshop CS6 installed, but when trying "edit in.." then LR suggests CS4 (which have been unistalled) and the four bottom alternatives to open (e.g. open as smart object) are not possible to use. Why?
The easy way to solve it is to reinstall CS6. Alternatively, there are a couple of options here: http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html
Maybe you are looking for
-
How much RAM can my Macbook Pro hold MAX?
Can my Macbook Pro hold a MAX of 8GB or is it just 4GB? I'm getting different answers online and I'm a little annoyed at this point. My computer specs currently are: 15 inch Laptop MacBook Pro 2.6 GHz Intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM. Got my
-
My Apple ID is showing verified on the website but on the iPad shows as account not verified. It says to check email with instructions but I don't have an email showing these instructions. Any ideas?
-
Find Tax conditions and amounts while creating a PO from reference.
Hi friends, I am creating a PO from another reference PO. When I create the PO the Tax conditions and amounts come from Sabrix 3rd party system. This data gets saved into SAP internal memory and is visible when we follow PO item-> Invoice Tab->Taxes-
-
Mac OS X 10.4.8 provides NO changes to iSync!
Mac OS X 10.4.8 is now out, and many people were hoping that Apple would take the opportunity to update iSync at the same time. After examining this update I can confirm that iSync remains at v2.3 and no new phone support has been added. Therefore So
-
Active users request taking too much time
Hello, every time i run "active users" request it take about 40 minutes and errored out the following X connection to aixtst01:1.0 broken (explicit kill or server shutdown). any idea?