Have Pixus and 3rd gen Airport extreme. Unable to replace with 5th gen airport extreme

I have Pixus and a 3rd generation Airport extreme . Unable to replace with 5th generation airport extreme. Problem?

Ok, thanks for the clarification. I assume that Pixus has provided you with a modem that provided an Ethernet connection to your 3rd Gen AirPort Extreme Base Station (AEBSn) ... correct? If so, then anytime you change networking hardware, it is a good idea to completely recycle power on all of the networking components.
Please try the following:
Power-down the Pixus modem, AEBSn, and computer(s); leave them powered off for at least 10-15 minutes.
Power-up the modem; wait at least 10-15 minutes to allow it sufficient time to initialize.
Power-up the AEBSn; wait at least 5-10 minutes or until its status light is a solid green. (Note: It may continue to flash amber. This is ok, as it may just require some additional configuration settings, like wireless security to attend to.)
Power-up the computer(s).
Network clients connected to the AEBSn, either by wire or wireless, should now be able to access the Internet through the Pixus modem. Please post back your results.

Similar Messages

Maybe you are looking for