Have problem while updating IOS

iphone Module :: 4s,
when am trying to update latest IOS thought WiFi it show's itunes icon in my phone and it's required to connect itune and download ios once i did like that it remove all apps and other data
It is downloaded full IOS [tatime taken 3 -4 hour ] and update process is starts it is like Restore factory setting

Sounds like your iPhone is in recovery mode. Try these.
http://support.apple.com/kb/ht1414

Similar Messages

There was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore. I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

iPad 2 froze while updating iOS 7.0.4. When connected to PC & iTunes get the message in recovery mode, must restore. I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
http://osxdaily.com/2010/12/04/ipad-dfu-mode/

Problem while update and insert data in table

Hi All,
I have problem while save line data....
I have an advance table.I take remove and duplicate line in message choice of advance table action layout.
Also there is one temp table to save Po number data which is populated in advance table according to PO Number search.And In Temp table record number is column which use
to insert and update data in temp table which mention in procedure
Problem is that : When i Searched PO Number and duplicate line and save that record it insert a new line always and it insert record according to duplicate line no .It not update previous line,insert new line always according to duplicate line no.
Please tell me what is solution?
Thanks,
Neil

Hi,
I am not cleared with your requirement.
If possible send me the screenshots for the same.
--Sushant
[email protected]

Facing problem while updating IInfotype 0009-bank details through workflow

Dear SAP Gurus,
I am facing a problem while updating Infotype 0009 through workflow which is integrdated with portal.
Scenario:
Employee logins to portal and changes his/her bank details like payee name, bank key, account number, postal code and city of bank, bank name etc.
Once he submits the request, my workflow is triggered through SAP_WAPI_START_WORKFLOW which is called from portal and goes through various approval steps and finally reaches the step where the container elements are finally to be updated in IT0009.
Field bank account number (BANKN), which is part of table PA0009 are easily updates using the FM HR_INFOTYPE_OPERATION by first enqueuing the employee number and after the update dequeuing it.
However fields like payee name (EMFTX) bank key (BANKL) , bank name(BANKA -structure BNKA_BF-this is automatically fetched based on bank key) and postal code(BKPLZ) and city of bank (BKORT) are from structure Q0009 (on the infotype 9 screen level) and from table BNKA (at table level). The problem is that these are not getting updated by HR_INFOTYPE_OPERATION as they are not the part of infotype 9.
Can anyone help me to understand how can these fields be updated ?
Quick help will be highly appreciated.

Hi Spantaleoni,
Thanks for your quick response.
Well actually the table BNKA is a master table for the bank information and we must not create entries in it or update the table programatically, rather we should use the available data in it.
Now say employee currently has bank as A and he wants to change it as B which is available in BNKA then he will just select the bank B from search help provided in portal which again comes from table BNKA only. Employee then submits the info and it must get updated in the infotype PA0009.
As far as think, this should be done on screen level of infotype PA0009 as I have already mentioned that certain fields are coming from structure Q0009 and they cannot be updated on PA0009 table level.
I am just looking for way through which I can update the screen of infotype PA0009 of employee through workflow.
Regards

I have trouble while update iphoto, i can install new version of i photo

i have trouble while update iphoto, i can install new version of i photo

What's the problem, exactly?

While updating iOS 6 on my iPhone I lost the Contacts I already had, where can I recover them?

While updating iOS 6 on my iPhone 4 I lost the Contacts I already had, where can I recover them?
Thanks in Advance,

Thank you so much for the quick answer, but right now I just have my iPhone with me, I have the PC where I Sync at home, how can I do to proceed? I just get into the Tech Support of iCloud, but It is not clear to me.... Thanks.

Access Privileges problem while updating ipod

Access Privileges problem while updating ipod
so im having troubles updating my ipod when i attempt to update it i get a message that says The ipod "Mitch" cannot be updated you do not have enough access privileges for this opperation
some of my things are updated but not all
any help would be greatly appreciated!
Dell Windows XP

hi j.block!
hmmmmmmmmmmm. one other thing that might be worth a try if all else fails. i have once seen something like this turn out to be caused by a really kinky version of this issue:
iTunes: "privileges" or "permissions" issue when importing audio CD or adding music to library
... where the permissions were odd on the ipod itself ... but i've only seen that happen once. it's probably worth checking on only if nothing else seems to be working for you.
love, b

HT201210 while updating iOS its showing "The disk you are attempying is full" kindly suggest as still 28GB free space avialable in iphone 5 32 GB.

while updating iOS its showing "The disk you are attempying is full" kindly suggest as still 28GB free space avialable in iphone 5 32 GB.

That message ("attempying"?) will be referring to your computer. Your phone does not have a disk.

Back up iPhone contact while updating IOS 3, then contact lost on iPhone & cannot restore from backup that appear on iTunes! help please

back up iPhone 3G contact while updating IOS to IOS 6.1.3
then contact lost on iPhone
& cannot restore contact from last backup that appear on iTunes-files!: it is grayed (not pickabble!)
this is scary ! not ipressed by mac for once!
help please!

Well Hello,
maybe 3GS as your question indicates that only S update should work, and it works, but now only my name appear in contact! wao!

Problem while updating the Support Package 17 on my SAP WAS SP9

Hi,
I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
ERROR 2006-10-13 10:23:22
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Please help me in this regard.....
Thanks in advance...
Satya

Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
ERROR 2006-11-22 10:13:57
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS

I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.

we have a same problem

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

Hello, i have problem to update my apps on my ipad

Hello, i have problem to update my apps on my ipad when i bought it was registered with email of seller which is lost later and ehrn i created my own apple id i cannot update my apps with it because it keeps asking me infos seller email please help me to update my apps ...regards
<Email Edited By Host>

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
What id shows at the bottom of the Featured tab in the App Store app ? You could try tapping on it and then log back in and then see what id shows for the updates.
But any apps that were downloaded by the previous owner will be tied to their account, and only their account will be able to download updates to those apps - you will need to delete and buy and download them with your own account to be able to download future updates to them.

HT1414 while updating iOS 5 my iPhone responses nothing but logo of iTune and USB port, now what can I do?

while updating iOS 5 my iPhone responses nothing but logo of iTune and USB port, now what can I do?

Do just like the diagram indicates: connect your phone to your computer, open iTunes on the computer and then restore.

Have problem while updating IOS

Similar Messages

Maybe you are looking for