Have search results link open in same window

Hello,
I'm looking at the FlexUI stuff and wondering before I delve too deeply... that and my Portal is currently not cooperating. How can I make it so that when the user clicks on a search results link, it shows in the same window (as opposed to opening a new window)?
Thanks,
Mike

Hi there,
we had the same issue - I opened an OSS and got following reply :

08.03.2007 - 12:45:49 CET SAP Reply
I have checked from my development colleague and confirmed that
this parameter is not supported currently and development has recently
no plans to support this feature.
I apologize for the inconvenience caused here.
Thank you for your cooperation.
Best Regards

Can you believe this ? I don't, as this parameter has been around since SP12 or so and still there is no official note regarding this issue.
> Please reward points :o) <

Similar Messages

How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

Hi Eric,
I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
I used a 2 element array going into a four loop
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
Defining the working director C:\altera\12.1sp1\qprogrammer\bin
And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
Thanks for the interest though
Best regards John

How to replace LOV popup with a search screen that opens within same window

Hi,
We have a requirement to get rid of LOV popups from our custom OA pages. They need to be replaced by search pages that open within the same window.
For example, we are creating an employee assignment to a department. We first find the employee (currently using the LOV), then the department (currently using another LOV) and then save the new assignmnet record.
The two options we have are:
1. search page fully replaces the current page, and when the user has selected a record, it returns them back to the first page, setting some fields, eg. employee id, employee name, employee address fields.
2. search page opens in a region of the same page (PPR?) and then disappears once the user has seleted a record.
I am not sure how to do this, and really could do with some pointers, i.e. the best way to achieve this.
Thanks in advance
Mark

Both of your options are valid with some pros and cons.
option 1: It gives you a nice interface but then you will have a pass a large number of data back to 1st page.
options 2: You can use the Rendered property of a serach region at runtime and achieve your goal. Since it will be a single page, result set to base items mapping will be easier. Though this kind of UI will look bad if your search region is big.
So it all depends on which option is easier to implement for you.
--Shiv

How Do I Make HTML Links Open in Same Window?

Hi
How on earth do I get the HTML links inside a flash movie open up in the same browser window where said movie is embedded in (As opposed to opening up as a new pop-up windows)? Here is the code I have inside each of the buttons I have inside my flash movie:
var link7:URLRequest=new URLRequest("videos/december.html");
videos_btn.addEventListener(MouseEvent.CLICK, buttonClicked7);
function buttonClicked7(event:MouseEvent):void
navigateToURL(link7);

Thank you thank you thank you!!!

Search results link which open in same window

Hello,
i want to open the search result documents in the same window as the search result. Therefore i edit the field 'Target Window Type' in the SearchResourceRenderer to 'SELF' which is used in the SearchResultLayoutSet.
But the document also is opened in a new window.
What i have to do?
Best regards,
TomSd

Hi there,
we had the same issue - I opened an OSS and got following reply :

08.03.2007 - 12:45:49 CET SAP Reply
I have checked from my development colleague and confirmed that
this parameter is not supported currently and development has recently
no plans to support this feature.
I apologize for the inconvenience caused here.
Thank you for your cooperation.
Best Regards

Can you believe this ? I don't, as this parameter has been around since SP12 or so and still there is no official note regarding this issue.
> Please reward points :o) <

How to have Safari links always open in same window

I've been researching how to have Safari always open links in the same window, but it appears this can't be done? I've seen this third party app, but am afraid of installing something that doesn't come from the app store because it might harm my macbook. Does anyone have any thoughts about how to have links always open in the same window? Or how to find out if I can trust this app:
http://canisbos.com/linkthing

You can reset the folio by triple tapping the title in the nav bar.
Bob

Search Results That Open in a New Window

I am going to implement the google search function on my
website, but I want modify it. The part I want to modify is when
the visitor hits enter, search, or whatever, the search results
openup in a new window or tab. I don't want it to open up in the
same window the website is presented in.
Thanks in advance for anyone's help!

check google to see if they have instructions. You should let
the users decide how they want to open the page though. when I
search I usually ctrl click to open the link in new tab

Trying to have pages open in same window

Hello! Total newbie here just getting my feet wet in iWeb.
Every time I publish, my pages after the home page open in new windows or tabs! How can I have each subsequent page open in the same window? Even "home" on other pages opens a new window! Obviously, this is not how I perceive a website to properly work.
I do see where you have the option to open a new window when selecting an "External Page" in the Link Inspector. However, I don't see the opposite option when selecting "One of My Pages". Also, I'm not using Mac.com if that has anything to do with it.
Take a look to see what I mean: http://overcat.net/home.html
Thanx so much for whatever help anyone can provide.
Message was edited by: noisejoke

I'm assuming you mean the little button in the upper right corner.
No. The little green button in the upper left-hand corner. BTW, whether you can control the initial window's size is application-specific. Some, like Word 2004 remember when launching a new window; however, you might have to open each previously saved document, resize it, and save it. If an application doesn't offer that feature, then you'll have to take it up with the creator.

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

HTML and XML files open in same window(KM Navigation iView)

Hi All,
I have created a KM navigation which is pointing the folder inside the documents repository. This folder contains HTML and XML files. It is rendering fine. But, when I click on the file links in KM Navigation iView, it is opening in new window.Here I need to open in same window. How can I acheive this?. Please help me.
Thanks & Regards,
Venkatesh R

Hi ,
check the below thread and try options mentioned in it
https://www.sdn.sap.com/irj/sdn/thread?threadID=72594
Koti Reddy

Menubuilder- Open in Same Window?

I have the advanced link setting for my links as "Open in
same window." The links continue to open in new windows. Is this
feature not desinged to launch the files in the same window as the
menu. Please help. Thanks.

Hi MissDona
I'm going to say "it depends". Normally, this is the default
behavior. But it likely will depend on the output type you are
creating. For example (and I'm somewhat assuming you fall into this
category) if you create .EXE output from MenuBuilder, a new
instance or window always opens, as MenuBuilder packages up the
Flash Player inside the .EXE. Thus, this version of the player runs
from a temporary location and has no clue about other movies and
whatnot.
Cheers... Rick

Pages won't open in same window

Hello! Total newbie here just getting my feet wet in iWeb.
Every time I publish, my pages after the home page open in new windows or tabs! How can I have each subsequent page open in the same window? Even "home" on other pages opens a new window! Obviously, this is not how I perceive a website to properly work.
I do see where you have the option to open a new window when selecting an "External Page" in the Link Inspector. However, I don't see the opposite option when selecting "One of My Pages". Also, I'm not using Mac.com if that has anything to do with it.
Take a look to see what I mean: http://overcat.net/home.html
Thanx so much for whatever help anyone can provide.

Hi Guys. Thanks so much for replying.
Cedric - I'm in 08. I posted in the 06 forum first by mistake. And I basically don't know "how" I built the site. I just kind of poked around like I usually do, trial by many errors.
Roddy - I've had the folder and index on my desktop. I hadn't previously uploaded the index and just did so but nothing's changed. My host company doesn't have an actual control panel. I have a feeling it's not a great one. At least for a beginner. Is there anything on their site I should be looking for?
Cyclo - I hadn't nothiced the Hear button working correctly, since I haven't actually been working there yet! You're right it works. I guess I do have to rebuild the text buttons as you say. I guess this is the down fall of not knowing HTML.
I really appreciate all the input folks.
Dave

Open in Same Window

I am rather new to Flash. I have created several drop down
buttons in flash for a webpage. I have set the action to open the
links in the same window but they are opening in a new window. I am
wondering if it is because when opened the flash buttons come down
too far on the page. Is there a way around this? Thank you so much
for your time.

Ckeezer <[email protected]> wrote:
> What would be the code in AS 3.0 to do this same thing?
> I have the following:
> home_btn.addEventListener(MouseEvent.CLICK, homeClick);
> function homeClick(event:MouseEvent):void{
> navigateToURL(new
> URLRequest("
http://www.something.com/default.aspx"));
>
> The code works, but it opens in a new window each and
everytime. I
> have 5 btns on each page, this is getting ugly. Thanks
for any help.
> By the way, who has the best books / tutorials on
learning Flash? I
> downloaded CS3 to see if I liked it, it is not bad, just
different
> from what I have done in the past.
You have to add the target information "_self" to open the
new location in
the same window.
I don`t know where to do so in AS3 thou...
Freundliche Grüße,
Franz Marksteiner

Wep app search result show on the same product page(product large view).

I tried the web app search result show on the same product page.
e.g checking the postcode which built as web app on the product page, to check availability to ship the user's area.
so the result show on the same page(doesn't necessary to lose the product page), however the web app result doesn't show on the same product page.
There is only way i know is to link another page.
Anyone has done?

I have done something similar with simple jquery, by loading the results page within a div placed inside the details template.
By doing this I solved all my needs. In your case will work too as long as you only need to show information.

XML Edit Form should open in Same window (Not a popup).

Hi all,
I have requirement to open the Edit form in Same window (Not a popup).
Assign the NewsExplorer Layout the user has edit and delete button. If the user edit the news it should not open in new window.while edit also should open in same window.
And while creating the news by using Xml form the EDIT form open in new window but i my requirement to open in same window.
Its possible? How to achieve this? Helpful replies will be appreciated.
Thanks and Regards
Thillai J

Not solved

Have search results link open in same window

Similar Messages

Maybe you are looking for