Have snippet bugs been fixed in RH8?

Hello All,
I have noticed a few bugs associated with using snippets in RH7, such as the snippets disappearing from the Snippets Pod once in a while, and bullets not rendering correctly in design view, to name a few.
I was wondering if anyone knows if these problems have been corrected in RH8?
M.S

May I add to this list please?
In FCP7...
1-are motion tab keyframes now cut & paste enabled?
2-has the VO tool input instability been fixed
Reading the What's New page for FCP7, it seems like FINALLY some basic stuff has been sorted, hooray! (even if its long overdue...)

Similar Messages

  • 5800 - have ANY bugs been fixed?

    My 5800 has a few problems.  It is 7 months old and still under warranty.
    The firmware is v30 and since the update I've noticed the following:
    - alarm clock bug - alarm and snooze don't go at the time set.
    - internet browser drops and closes whilst surfing.
    - streaming real player radio is very intermittent and keeps buffering or drops out completely.
    - display locks and 'black' screen during real player streaming.
    I may have other faults not yet noticed but my question is, are the above problems actual faults AND can they be fixed forever.  I don't want a hard reset or re flash for the bugs to return.  I've spoken to Nokia who say send the phone to the care centre but I don't want a yoyo phone back and forward with bugs that Nokia have yet sorted.  I understand v31 isn't any better but I cannot update to that here.
    I don't want a phone with problems and am at the stage I want to reject the phone as not fit for purpose but Nokia say they can fix it.
    Can they??  Have they?

    Hmm, well the only issue I have with the 5800 is the same one as the above poster said. The phone doesnt handle this website very well, but it does work very good on other websites. For one thing a lot of the bugs has been fixed as the only bugs I've ever encountered is the Nokia Forum bug and the sometimes closing of the browser. However its seemed that the browser problem I was having is related to the signal strenth of the wifi spot  was in, so no biggie. Also, Opera Mini 5 is a phone saver in terms of the web browsing experience.
    All in all the phone is awesome.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • PDF in Safari: Fonts not displaying correctly: Has this bug been fixed?

    Last year I was trying to view a PDF on the iPad with Safari, and there was a font corruption problem: On zooming in, the type would become garbled. Now granted, I was using a non-standard font (Univers Type 1). I also noticed this problem with certain magazines in the MagCloud app. I decided to work around the problem by converting my type to outlines; while this worked, it made the PDFs much larger in file size.
    I checked this bug again under iOS 4.3 and could not replicate it. I've found anecdotal evidence out there that as of iOS 4.2.1 this may have been fixed, but I can't find confirmation. Any help in this regard is much appreciated. I need to present my project managers with discrete evidence that this bug has been fixed before they'll allow me to go ahead with "live" type -- and as we all know, the plural of anecdote is not data. Thanks.

    Apologies, I should also make clear another key point...where it's blowing out (multiple places), I'm using apex_item within the SQL to render the form. So that's where the problem lies

  • Has this bug been fixed in 1.3 and beyond?

    There is a problem with adding a Mnemonic to a JLabel and linking it to a JTextField (I haven't tried other JTextComponents). Copy the following code, and try to run it:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class SwingProblem
       public static void main( String [] args )
             Create labels and text fields.
             You can use the keyboard mnemonics to switch
             between the fields: ALT-S and ALT-J.
          // For the top of the frame
          JLabel jlTop = new JLabel( "Swing" );
          jlTop.setDisplayedMnemonic( KeyEvent.VK_S );
          JTextField jtfTop = new JTextField( 20 );
          jlTop.setLabelFor( jtfTop );
          JPanel jpTop = new JPanel();
          jpTop.add( jlTop );
          jpTop.add( jtfTop );
          // Now, for the bottom of the frame
          JLabel jlBottom = new JLabel( "Jazz" );
          jlBottom.setDisplayedMnemonic( KeyEvent.VK_J );
          JTextField jtfBottom = new JTextField( 20 );
          jlBottom.setLabelFor( jtfBottom );
          JPanel jpBottom = new JPanel();
          jpBottom.add( jlBottom );
          jpBottom.add( jtfBottom );
          // Make the frame
          JFrame frame = new JFrame( "What's up with this?" );
          frame.setSize( 300, 150 );
          frame.addWindowListener( // stop the program already!!
             new WindowAdapter()
                public void windowClosing( WindowEvent evt )
                   System.out.println( "See ya later, alligator!" );
                   System.exit( 0 );
          // Now add the content
          Container cp = frame.getContentPane();
          cp.add( jpTop, BorderLayout.NORTH );
          cp.add( jpBottom, BorderLayout.SOUTH );
          frame.setVisible( true );
       } // main( args )
    } // SwingProblemThe problem: when you use the keyboard mnemonics to switch between the two text fields, the the character is entered into the first field before the focus is transferred to the other one.
    I am currently using JDK 1.2.2 on Micro**** Win****, and am waiting for the arrival of a disc with JDK 1.3 (I don't have the patience to wait for the download of the newer JDK over the telephone line...)
    For those who have JDK 1.3 or 1.4(Beta), has this problem been fixed? I wanted to know for sure before I added this to the Bug Report.
    Thanks

    It has been fixed in 1.3.
    Sorry for the post

  • Before I buy an Iphone, has "reply all" bug been fixed in group messages?

    I have searched all over the internet and it seems like Iphones have a major problem that does NOT seem to be fixed yet.
    Currently, I have a G2 with T-mobile. When I send a text message to several people and they reply to me, only I see the replies. Not everyone gets everyone else's replies.
    I have noticed with my husband's Iphone 5s, if I send a text message to 5 people and one person responds, ALL five people see that one response. Very annoying.
    On his Iphone, I have turned off group messaging and Imessage but this does not turn off the reply all feature when I send a text to a group.
    Before, I go out and buy my own Iphone 5s, is there any way to turn off the "reply all" feature? Remember, I have disabled both group messaging and IMessage. In the settings, Group Message and IMessage are switched to off. Even with these settings off, when I send out group texts and one person replies to me - everyone sees it.
    How can this really be turned off? Or is this still an Apple glitch?
    If it is still an Apple glitch, I will not be buying an Iphone. I want to send group text messages but not annoy everyone with everyone else's responses.
    Thanks in advance for your help and time!

    Is there a work around for the Iphone? Like buying a separate texting app?
    If so, do you have any recommendations?
    I would like to get an Iphone because of its other features, but for work purposes (I work in a nonprofit with teenaged human trafficking victims) I need to be careful with my text messages.
    Any ideas would be greatly appreciated!
    Thanks!

  • Anyone have any bugs or fixes in health app?

    My previous weeks data has now gone from my dashboard. It will let me add an item to the dashboard but as soon as I go to the dashboard to view it, it says dashboard is empty.  This only seems to have happened since I linked MY FITNESS PAL app in the source data tab

    Nooo or you would use OS X Recovery Mode: Disk Utilty and then Startup Disk.
    Mac OS X & Mountain Lion Community
    https://discussions.apple.com/community/mac_os
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
    Recovery Mode
    http://support.apple.com/kb/HT4718
    ExpressLane
    https://expresslane.apple.com/
    Mac OS X Help
    http://www.apple.com/support/macbasics/
    Isolating Issues in Mac OS
    http://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/
    https://www.apple.com/support/quickassist/
    http://www.apple.com/support/mac101/help/
    http://www.apple.com/support/mac101/tour/
    Get Help with your Product
    http://docs.info.apple.com/article.html?artnum=304725

  • Long standing bug in deployJava.js has not been fixed

    I thin it's outrageous that the bug reported here deployJava.js and HTTPS Problem has not been fixed. I can only assume that Oracle has abandoned Java.

    You'd be surprised to know that some Java API (including Java2D & Swing) bugs & RFEs I have submitted 12 years ago have still not been fixed.
    I doubt it's Oracle's fault, as much as it was Sun's, probably a generic lack of people and resources to allocate to fixing small bugs coupled with a bad prioritization system which does not automatically increase the weight of a low-priority bug after it has spend some times/months/years in the bug-db.
    On the other hand, I have always wondered what do all these people at Java/Sun/Oracle do all day long (was especially true of the JavaFX team over 2009/2010 and now I am starting to do the same about the JWS devellopment/support team considering the huge amount of things non-working correctly in this technology).
    ;)

  • Have my Keynote quibbles been fixed?

    I'm wondering if 09 has fixed my two major issues with Keynote:
    1. Can the slide be seen centered in the work area rather than stuck top-left?
    2. Has the bug been fixed where exporting to Powerpoint fails when there are speaker notes?
    Thanks

    Regarding #1. Easiest work-round I've found to the problem of starting motion paths to the left of slide edges is:
    1) set up the motion effect with the object you're animating starting at the left edge of the slide.
    2) then select object and use inspector to enter a -xxx pixels position to move the start of the motion to a point 'off stage left'.
    A bit clunky but reasonably quick to do. Do you know any other workround?

  • FF has become useless and nothing but bugs and fixes

    Comment, <br /> See also similar question with some answers
    * '' 'save as' redownloads the data '' [/questions/986667] ~J99
    you cannot right click save as on an image, after the image has been dl already to save it FF re-downloads the image again. Noone can produce a config setting that corrects that. so if your paying for data FF is causing you to pay double.
    while something is DL most of the time the dl stalls. You now cannot pause and resume a dl to get it going again, the old Dl dialogue box had a pause function, the new one 'right-click' shows a pause but its grayed out and does not function
    FF cannot handle multiple tabs anymore, if you open multiple tabs it freezes FF and you get a slow script error. But the same tabs can be opened in an old version of IE 7,
    the repeated crashes are well known without a fix,
    the new version seems to have numerous bugs without fixes, or explanations that you need some add-on instead of a FF function.
    the mere fact that FF cause double data usage without a fix or explanation is beyond inexcusable. Payinf for double data because of a code error is unbelievable. test i opened IE went to a pg open 3 tabs saved the images, and did the same in FF and it used 3.23 times more data.
    Every since that Tor / FF debacle when the old versions were declared no good every version of FF since then has had to many errors without fixes that it has became an industry joke. The fact that chrome and IE or better browsers now speaks volumes. I am no code writer, but since that time, every version is so slow and bug prone, that what ever attempt to say face or redemption has been a disaster.

    To answer your questions here:
    <blockquote>you cannot right click save as on an image, after the image has been dl already to save it FF re-downloads the image again. Noone can produce a config setting that corrects that. so if your paying for data FF is causing you to pay double. </blockquote>
    I'm not sure I understand this. When I click save image as then try again it works fine for me. Can you clarify what you are trying to achieve?
    <blockquote>while something is DL most of the time the dl stalls. You now cannot pause and resume a dl to get it going again, the old Dl dialogue box had a pause function, the new one 'right-click' shows a pause but its grayed out and does not function </blockquote>
    It is better to use an external Download Manager (DM) if you are on dialup or have an unreliable connection.
    An external Download Manager offers better support for resuming interrupted downloads than the built-in Firefox DM.
    You can use the FlashGot extension to integrate an external Download Manager in Firefox.
    FlashGot: https://addons.mozilla.org/firefox/addon/flashgot/
    <blockquote>FF cannot handle multiple tabs anymore, if you open multiple tabs it freezes FF and you get a slow script error. But the same tabs can be opened in an old version of IE 7, </blockquote>
    This is most likely the way Firefox is set up on your end. What add-ons are you running since I don't see any listed. I need some more non-personal information from you. Please do the following:
    *Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
    Now, a new tab containing your troubleshooting information should open.
    *At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
    *Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
    If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
    <blockquote>the repeated crashes are well known without a fix, </blockquote>
    Again this is specific in your case. Follow the steps below to provide us crash IDs to help us learn more about your crash.
    #Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
    #Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.
    [[Image:SubmittedCrashReports-Win7|width=520]]
    <br><br>
    <blockquote>the new version seems to have numerous bugs without fixes, or explanations that you need some add-on instead of a FF function. </blockquote>
    I see you have Fx 26 installed and not the latest 27.0.1. See what's new with Firefox in version 27.0.1 http://www.mozilla.org/en-US/firefox/27.0.1/releasenotes/
    <blockquote>the mere fact that FF cause double data usage without a fix or explanation is beyond inexcusable. Payinf for double data because of a code error is unbelievable. test i opened IE went to a pg open 3 tabs saved the images, and did the same in FF and it used 3.23 times more data. </blockquote> Double data usage? Are you talking about a smart phone data limit or your RAM usage?
    <blockquote>Every since that Tor / FF debacle when the old versions were declared no good every version of FF since then has had to many errors without fixes that it has became an industry joke. The fact that chrome and IE or better browsers now speaks volumes. I am no code writer, but since that time, every version is so slow and bug prone, that what ever attempt to say face or redemption has been a disaster. </blockquote> Tor and Firefox? What are you talking about?

  • Have Melodyne/Rewire file bugs per Logic 8 been fixed?

    I'm about to do a clean install of Leopard on my system drive (and the online upgrade to 10.5.3), followed by installation of Logic Pro 8.0.2 and Melodyne Studio 3.2.2.2. Trusted users on this forum have reported problems with Logic following installation of the Melodyne Bridge and/or Rewire files.
    I'm wondering whether these bugs have been fixed and whether the Melodyne Bridge is now working and crash-free in Logic 8 -- assuming one is running Melodyne 3.2.2.2 or, according to the tech at Celemony/Melodyne, any version of Studio 3.2.2.0 or later.

    The problem is nothing to do with Logic as such. The problem is with the Melodyne Rewire stuff on Leopard.
    I think Celemony have a forum - might also be worth asking over there. I know they have issued an update recently, so they might have fixed it...

  • After updating Firefox, the "What's New" page doesn't say what bugs have been fixed

    I updated from 3.6.9 to 3.6.10. When restarted, Firefox displayed this page: http://www.mozilla.com/en-US/firefox/3.6.10/whatsnew/
    Supposedly it describes what's new in 3.6.10, but all it has is what's new in 3.6. Nothing about what bugs have been fixed.

    This is only a chemspill release to fix a crash.
    *https://wiki.mozilla.org/Releases/Firefox_3.6.10
    *https://bugzilla.mozilla.org/buglist.cgi?quicksearch=ALL%20status1.9.2:.10-fixed

  • Have the drop-down menus in Muse been fixed?

    I recently had a problem with Adobe Muse (Case #0183888983). I was emailed the information that the problem, malfunctioning drop-down menus in my site, had now been fixed. In the meantime I decided on my own to access an earlier version of Muse through Time Machine and then re-save and publish the Muse site with this earlier version. I'm afraid I don't dare open up the Muse site in this fixed version in case it doesn't work as described, and then I have to go through the tedious process again. So there's no way I can tell if my site would function with the new fixed Muse. The next time I create a new site, I'll be able to determine whether the bug has been fixed.

    Muse 3.1 did fix a couple of issues with menu bars.
    http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html
    If you could be more specific about the problem you were seeing, someone could probably confirm if 3.1 fixes it.

  • Have the Controller Assignments been fixed?

    Ok, while I'm waiting for mine to arrive, if anyone out there is familiar with the (many) bugs in the handling of controller assignments, can they tell me whether these have been fixed in LP8?
    Or are the same issues still there?
    A reliable controller assignments window is the one thing I've most wanted since the dawn of LP7...
    Cheers mateys!

    Controller assignments includes quick access, control surfaces and now MIDI key commands in addition to the learn controls functionality. The whole nine yards of wax enchilada balls.
    My specific problems relate to th controller learn to plugins functionality, and basic buggy operation of the window itself (for instance, clicking on cancel in one of the reassignment warning dialogs will just delete all of your assignments.)
    Ok, here's a long post - I haven't exhaustively through this stuff with LP8 yet (too depressing) but I did verify that the core bad behaviour still exists identically to LP7.x...
    Ah slippery haddocks, I would post the feedback I sent to Apple, but I can't find a local copy - I posted it to OSXAudio so I usually retrieve it from there but the site is down at the moment - when it comes back up, I will get it and post it...
    As a quick general example, I have eight sliders I want to map to softsynth controls - let's say the GB synths, because they have limited controls. So I open the first one, and map the eight controls to my eight sliders. Cool. Works fine. I then load up the next one, and map those eight controls to my sliders.
    This is cool, because whatever GB instrument I load in the instrument slot, my controller will control the 8 parameters I want.
    I keep going. At some point (which is random), the odd learned control will just stop working - ie, after I've learned maybe 6 or 7 instruments, a random control on a previous instrument just won't respond. If you try and "fix" it by relearning the control, sometimes it works, sometimes it doesn't. Sometimes it just means other controls randomly stop working.
    Worse still, when you twiddle a control to see which parameter it's assigned to, the incorrect assignment is called up in the controller assignments window, so you just don't have a clue what's going on.
    There are plenty of others, but basically, setting up controller assignments works for a few simple things, but it corrupts and becomes a major pain very quickly.
    It's a shame, because I was developing an awesome controller config, where I had buttons on my controller that would switch modes between mixer, instrument, plugin settings and so on, and I always had the most important parameters of all my plugs under my fingertips.
    Except for Logic's randomly flaky corruption which rendered the whole thing pointless (as you never knew what was randomly going to stop working).

  • HT1414 Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

    Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

Maybe you are looking for