Have the MSI-845Pe MAX(pure version) PCIlock and AGPlock???

I have a question.
I want to buy this motherboard and I don´t know if this motherboard have PCIlock and AGPlock for a little overclocking.
thanks for all.

I'm sure. It's in the bios under "frequency/voltage control".
You have the choice of AUTO (unlocked), and several locked frequencies. Currently have mine set at 66.67/33.3.

Similar Messages

Does MSI 845PE Max supports LBA

In fact all is in the title... Does MSI 845PE MAX (6580) supports for LBA drive?

Yes, as you need to have the patch incorporated in order to recognize the total drive to start with. There is some info here: http://support.microsoft.com/default.aspx?scid=kb;en-us;305098

MSI 845PE MAX-L mobo no power whatsoever

Hi,
Just upgraded my mobo, RAM & processor to the following:
MSI 845PE MAX-L mainboard
Intel Pentium 4 2.4 GHz
DDR-DIMM PC2700 512MB
Put everything together and worked a treat from Monday. Reinstalled all my software including XP and had everting running smoothly for over 24 hours with the tower boxed up (so no possibility of accidentally touching any componentry).
This morning I tried to switch on the machine and NOTHING. No response from the mobo no fans no lights no beep - nothing.
Checked all leads in place.
Then tried power supply (Eagle ATX 350W Switching Power Supply Pentium 4 compatible) on my old ABIT mobo together with my old 256 Mb SRAM & Hercules 3D Prophet 32MB graphics card. It worked!
So put same setup back on the new MSI mobo, i.e. just graphics card, 512Mb DRAM, power supply & Intel 2.4 processor. Still nothing. Pretty sure got all my leads from the tower in all the right places on Mobo as they matched the previous configuration and that wouldn't have worked before, right?
Whats going on, why does my pc work one day and then can't be arsed the next?
Lloydich

I had an Eagle 350watt PSU come supplied in my new case but i didnt trust the PSU so i took it out without even trying it.
What is your complete system build setup?
Those el-cheapo PSU's are not really upto running the most intense of systems despite what the manufacturers say.
Unplug a few components from off the PSU and try to boot up again... its not impossible the PSU is dead... honestly if you spend alot of money on a new system it seems criminal not to get a decent PSU, im not criticisng here im just surprised how many people dont consider getting a 'good' PSU to power their new state of the art PC's.
Try the unplugging of a few components that connect to the PSU if this dont work for you then if possible try a better PSU (350 watt does not neccesarily mean its good, some cheap 350 watt PSU's are less powerful than a good 300 watt PSU)

MSI 845PE MAX

i'm using the mainboard MSI 845PE MAX
does anyone else uses this board?
i just wanna know if this board can support AGP 8x graphic cards
can anyone tell me?

hello, nope its support maximum AGP 4x. but good news is that you can use any AGP 8x VGA on it without almost any limitation. differents is quite little. only few visual increament. nothink performance related.

MSI 845PE Max Lan - MS-6580 Ver.2.0 boot failure

I recently purchased this mainboard and components. All's working fine except for 1 strange issue:
On each 1st boot-up (after I powered down) the harddisk (UDMA 100, 80GB Western Digital) is not detected. This results in a boot failure.
After this 1st failure I reset and from then on booting is OK, harrdisk is succesfully detected (although it always takes about 10-15 seconds before detecting).
Anyone else experiencing the same problems?
This is my config:
- MSI 845PE Max Lan
- 2,4GHz P4
- Western Digital 80GB 7200rpm (set as master, only device on its cable)
- ATI Radeon 9700
- 512 MB DDR (pc2700)
Hope anyone can help out.

Note: FSB533 CPU is required in order to choose DDR333 selection in the BIOS setup
thats what is says here
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=364&MODEL=MS-6580

MSI 845PE Max-L

Is there a compability problem between Radeon 9200 Atlantis,P4 2.66 Gig prosessor and MSI 845PE Max-L ??
Memory module is DDR 400 512 Ram,HD is Maxtor 120 Gig ATA 100
Every single component works fine with my other Motherboard ( MSI 845E Max )
but when I try to start these in 845PE Max-L only thing that happens is prosessor cooler spins 2 seconds...then totally silence....I got a motherboard replaced once
already....
I cleared CMOS
tried another graphic card ( Geforce3 Ti 500 )
Nothing happens even with default settings...
Highly unlikely that two broken motherboards has been given to me !?!?!?!
Please someone tell me what to do..
E-Mail,MSN or here at the Boards...
- THX -

"Lower you DRAM Freq to 333MHz and increase you DDR Voltage to 2.7v, thereafter incrasing your AGP Voltge to 1.6v."
Why ? and how ?
cannot go to BIOS..
and I just asked if there is a compability problem...
Danny : no other cooler movement :(
just prosessorcooler spins few times,
there are no shorts between board and case through the standoffs.
I took motherboard out of case ( in case of that )
Whole F****n thing is starting to me off...
Never had this much problems with MSI-boards :(
So,once again ; every component works in 845E max ,same case,same powersupply etc.
Only sure thing seems to be : 2 broken motherboards ! ( god damn )

When I try to update my phone to ios 7 it says i need to update my itunes to 11.0.5, when i check my current version in help menu under check for updates it says I have the current 11.0.5 version.

When I try to update my phone to ios 7 it says i need to update my itunes to 11.0.5, when i check my current version in help menu under check for updates it says I have the current 11.0.5 version. Even the downloader for the update doesnt show that i need to update.Help plzz????

There is some kind of error. The new version of iTunes is 11.1, which although is not available via updates, it can be downloaded from the Apple website here:
http://www.apple.com/itunes/download/
After updating iTunes to the newest version you should be able to update your iOS
EDIT: I just did that and it works

HT2736 Having emailed myself a gift voucher, I can't redeem the code. Everytime I try it tells me I need Itunes, but I have the most up to date version - help!

Having emailed myself a gift voucher, I can't redeem the code
Everytime I try via the email link, it keeps telling me I need to have Itunes
I have the most up to date version, but nothing seems to allow the Pc (hp) to open it - can anybody help?

If this page doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

How can I update Dreamweaver 8 to 8.0.2 if I don't have the .MSI file?

How can I update Dreamweaver 8 to 8.0.2 if I don't have the .MSI file? I have moved this old copy to newer computer/operating system and don't have all the original discs and things.

Donny4646 wrote:
And you can move an installed application if you move a few other files manually and without getting into the registry.
I'm very skeptical about that as I have dozens of Registry entries associated with my older DW installation.
Still trying to assist anyway. Check this thread for a reported successful resolution
https://forums.adobe.com/message/4215502
Also try this:
Download the unwrapped 8.0.2 update from Adobe: http://kb2.adobe.com/support/dreamweaver/ts/documents/kb400150/DW802_unwrapped.zip
Extract the files into a root directory. There should be only one MSI file.
Open an administrator privilaged command prompt by typing in the Start menu "Command" and right clicking the "Command Prompt" option and selecting "Run as Administrator"
Navigate to the directory you extracted the files to using the CD command
Once in the directory with the MSI file run the following command: msiexec /update patchpackage.msp
Step through the installer, and everything should be fine, open Dream Weaver and go to Help -> About to verify the patch installed.

I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is still $29. You must have at least a model 2,1 MacBook.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

MSI 845PE Max Motherboard TV CARD problems

hello,
i'm use to MSI 845PE Max motherboard and avermedia tv card. i'm plug in to avermedia anywhere pci slot in motherboard but not installed avermedia. error is "ACPI bios system motherboard extension" How i can install to avermedia tv card.. HELP ME..!
PoWeRGuArD

i'm plug in to avermedia anywhere pci slot in motherboard
dont understand this bit,try different pci slots

I just got an iPhone 5S, now when I try to use my old iPad the apps won't work because they are syncing with my new phone. Can I have the same account for an old iPad and a new iPhone?

I just got an iPhone 5S, now when I try to use my old iPad the apps won't work because they are syncing with my new phone. Can I have the same account for an old iPad and a new iPhone?

Connect your iPad to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Does Elements have the Photoshop Exposure adjustments for Gamma, Exposure and Offset, and where? Is Gamma missing?

I have been a photoshop user since version 3, and am considering switching to Elements 13, as I am not a professional, but do this for home pictures. I found that the Exposure Adjustments setting is fabulous, where I can adjust Gamma, Exposure and Offset, and the the Shadow and Highlight is also great. Does Elements have an EXPOSURE (Gamma, Exposure and Offset) adjustment tool, or something close, and if not the same, how inferior? Same Question for Shadow/Highlights.

As to saving edited items in ACR Edited formats or as a JPEG, unless I Open Image and save the file as a JPG, the edited RAW image is not a portable file, as only Photoshop or Elements will compile the edits from the embedded information. I do see that moving from RAW to Elements Normal mode, I can save the files and do other forms of editing, but I may have to give up a 16bit image for an 8 bit image to do any editing in normal Elements.
When you are using only the 'Done' button with a jpeg without opening and saving in the editor, you have written the settings to the metadata without altering the pixel values. In my own case, That's enough for 80% of my shots. That means: non-destructive editing (the original is still available), parametric editing, the settings are saved, can be used for the next picture and take minimal disk space. You don't need to keep a version set. On the other hand, only Adobe software can read it. Those edits in ACR are calculated in 16 bits even if jpeg is only 8 bits.
On the other hand, if you open the file in the editor, you have the choice to open the converted version in either 8 or 16 bits. Of course, if you want to save it in 16 bits, you'll save in psd or tiff.
What do you know about Photoshop's ImageReady. It appears to offer simpler interfaces to normal Photoshop.
Sorry, I don't know anything abut ImageReady...
As to Elements, it appears that many of the more sophisticated image adjustments that exist in Photoshop are there, but in an 8 bit depth, buried in their different menus.
There are a lot of discussions about 8 or 16 bits depth in Elements. The main idea is that you can't use layers in 16 bits (except with a clunky workaround) and that you can't use local tools in 16 bits. On the other hand, nearly all global edits are available in 16 bits, including many filters and plugins. And with ACR, you can open jpegs in 16 bits... For me, even if I know that I can do nearly everything I need in 16 bits in the editor, I must say that first editing in ACR makes that unnecessary most of the time.

I have the iPhone 3 (iOS 4.2.1) and I cannot update to iOS 5.

I have the iPhone 3 (iOS 4.2.1) and I cannot update to iOS 5. iTunes tells me my current version is the latest version. I have the latest version of iTunes.
Any advice?

The iPhone 3G came out about 4 years ago, and the hardware they had at that time can not support the latest and greatest iOS 5.

HT4623 How do I update if my iPad does not have the software update button in between about and usage?

How do I update my software to iOS 5 if I do not have the update software button in between about and usage in my general settings?

You'll need to connect the iPad to a computer running the latest version of iTunes. If the computer does not belong to you, make sure you create a backup (not a sync) before installing the update.

Have the MSI-845Pe MAX(pure version) PCIlock and AGPlock???

Similar Messages

Maybe you are looking for