Have the URL to save the Web Intelligence Report to be saved as excel.

Hi,
As per our project requirement,we need to have a url to provided to the end users and so that once the users login using their id,they directly get option of saving the excel file.
Let me know if you guys can provide me with a suggestion?
Regards,
Dikesh Shah

Well, I am not 100% clear on your requirements, but it sounds like you need the reports to not go out until a certain event has occured. There is an Event server in BO that should be able to handle this. You can create file-based event monitoring so that a report(s) only run based on whether a file was created in a certain location.
I have not actually set this up myself, but I know we do this where I am now. We do it nightly. No reports run until certain jobs have completed, and created a certain file.
I did find this one article about this which is a couple of years old, but still relevant, and there should be a newer one if you do a search.
http://www.businessobjects.com/pdf/products/platform/enterprise_tech_overview.pdf
Good luck!
Thanks

Similar Messages

How To Clear The Web Intelligence Report Cache in BO 4.0 Linux

Hi Experts,
I have followed the SAP Note 1207029 to Clear The Web Intelligence Report Cache in BO 4.0 Linux, but in the note they have mentioned the path of BO XI 3.1 that doesn't exist in BO 4.0.
Given Path in the note: <installation directory>/useraccount/xir2/bobje/data/computername_50064/storage/docs
In BO 4.0: Inside Installation directory theres no useraccount directory.
Please anybody tell me the path of BO 4.0 in the linux server to clear the WEBI report cache.
Thanks in Advance,
Gandhi

This would be your path
<install_dir>/bobje/data/<cms_port/storage//docs

Error while exporting the Web Intelligence report

Hello Gurus,
We are using BO 3.1. I have to do some modifications for the existing Webi report. Once i do the modification, save them then try to export it back to the repository. I am getting the following error:
" your security profile does not allow you to save the document in the specified location"
I have all the Admin rights on the folder that I am exporting to. Please throw some light.
Thanks,
NR

Revisit your right on the folder, you might be part of the admin group for the folder but not all previledges are set, like overwriting report that you did not create

Problem with Dates in the Web Intelligence

Hello Everyone,
I am facing a problem with the Web Intelligence Report, in the universe there is a Date field (L01 Date and L01 Date Key). In the report Web Intelligence when i use L01 Date Key it works fine (like 10/07/2010), but when i use L01 Date it shows a Strange Date like 31/12/69. I´ve already tried out with another infocube and query, but the value is the same (31/12/69).
Does anybody have any idea ?
Regards,
Jordan.
Edited by: Jordan Silva on Jun 10, 2010 10:08 PM
Edited by: Jordan Silva on Jun 10, 2010 10:09 PM

Hi,
The problem is coming because L01 field contains summary data of L01 filed and L01 key field contain actual value of that field.
so date field cant be summarize so that's why you are getting an error. Please check with some non date field. hope it will work perfectly fine.
regards,
SG

Adding a image in Web Intelligence Report

Post Author: palani007
CA Forum: Integrated Solutions
hi,
I am new to this forum, i am not sure whether i have asked the question to the right group our not.
Here is my question,
I have a situation where in i have to add a logo for each company based on the selection of the company name.
The things which I have done:
For that i have stored all the company logo as bmp file in the server. I have created an object in the universe to fetch that information(url) from the table but while preparing the Web intelligence report, i am getting the logo as a url. Even after changing the format to "image url"
could anyone give me a solution for this?
Ur Help is highly appreciated.
Thnx

Post Author: amr_foci
CA Forum: Integrated Solutions
to add an image to the Webi
1) add your images in this folder" C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Images" in a jpg format lets say " myimage.jpg"
2) add a free standing cell to the web report.
3) in the properties of this cell , go to background image , click custom , write the name of the image "myimgae.jpg" by default it will wirte to you "boimg://myimage.jpg" and it will show you your image in the box
4) configure the properties of the image like, position and border, etc.
good luck

BI Launch Pad - Error opening Web Intelligence Report (Error: INF)

Hi:
We're working with 4.1 Support Pack 3 Patch 1
Version: 14.1.3.1300
We migrated a Webi report from development environment to testing and it was working fine.
After making some minor changes on the Web Intelligence report, we migrated again, but now when we open the Web Intelligence report we get the following error:
Faltal Exception occured. The cause was: com.businessobjects.corba.generic.container.proxy.internal.DependencyFailoverCallbackImpl$FailoverFatalException:
Prepare failover failed (Error: INF)
Any ideas?
Thanks in advance!
Kind regards,
Florencia

Hi Florencia,
It seems like report is corrupted some how.
To check report is existing in filestore or not , go to report in Launchpad->Properties->check File name , there should be frs path assigned to it.If not it is corrupted.
Ex : File Name:frs://Input/a_067/064/004/278595/auytslwhrgrdneqcvzbefs0-guid[atli.nsurgzit4q8pfgonmi].wid
If it corrupted , check in myfavourites : ~webintelligence folder , there you can find last auto saved instance.If not we may need to create new report.

Freeze header row panes in cross tab WEB Intelligence report

how do i freeze the crosstab header row in the WEB INTELLIGENCE report so that the header remains stationary /freezes at the top and the data can be independently scrolled.(similar to freeze panes in MS Excel).
please provide me with a Quick Solution since i am stuck on this task for quiet some time.

Hi,
Prepare to be stuck no longer!
Sorry, this functionality is not available in webi..
This suggestion has been made multiple times in the Ideas Place : https://cw.sdn.sap.com/cw/community/ideas/businessanalytics/sbowebi
for example: https://cw.sdn.sap.com/cw/ideas/1664
please Vote it up. actually, i see it is in status "under review" so that is positive. No commitments to timeline for inclusion, so don't hold your breath!
Regards,
H

I'm migrating a WP site to BC. I want to use a web app for their Blog...is there any way to have the web app item show in the root url vs root-url/web-app-name/web-app-item-name?

I'm migrating a WP site to BC. I want to use a web app for their Blog...is there any way to have the web app item show in the root url vs root-url/web-app-name/web-app-item-name?

Hi Justin,
There's nothing like that atm. Please see http://forums.adobe.com/message/4730854
Cheers,
-mario

SSL VPN message "This (client) machine does not have the web access privilege."

Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
   quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
   network 192.168.0.0 255.255.255.0
   default-router 192.168.0.1
   dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny   ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
                UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
   heading "My Intranet"
   url-text "Cisco" url-value "http://192.168.0.2"
   url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
   url-list "MyServers"
   functions svc-enabled
   svc address-pool "sslvpnpool"
   svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!

Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan

In DW can I put a slide show in as its background. Then have the web site over it?

In DW can I put a slide show in as its background. Then have the web site over it?

Dreamweaver has no built-in provision for this. But you will find jQuery plugins that can do it.
Supersized - Full Screen Background Slideshow jQuery Plugin
Nancy O.

When will the SAP Mobile BI Android SDK to embed analytic views (Web Intelligence reports and Dashboards) in custom mobile Android App be supported/

hi all,
SAP Mobile BI IOS SDK provides such SDK to embed analytic views (Web Intelligence reports and Dashboards) supported by the SAP BI application inside your own custom mobile applications, while Android SDK does not provide such sdk. I would like to know if there is any plan or roadmap to support this interface in Android SDK?

Thank you Vishwanath for your reply. We already developed an Android App, and just want to embed and open SAP BO report directly inside our own App, instead of launching SAP Mobile BI App.

Does anyone have the link to report in app purchases made by a minor

does anyone have the link to report in app purchases made by a minor?

Click Contact Us at the bottom of this page, then click Contact itunes support

I have the underlying task reported failure on exit problem in a imac

I have the underlying task reported failure on exit problem in a imac

Hi,
Here's an article for that:
http://support.apple.com/kb/ts1901

Date data from Web Intelligence Report not equal to Date from Source

Hi,
I am creating a Web intelligence report based on a BEx query. I have a field called 'Date' that I am bringing over from the BEx query. It has a format of MM/DD/YYYY. When I view the 'Date' in Web Intelligence, it is displaying as 1/1/70. For example, in the BEx Query, 'Date' = 11/01/2011. In Crystal Reports, it is showing up as 1/1/70 as the only date. The source field contains more than 1 date. I'm not sure what's going on. I am using the 14.0.0 (2010) version of the Web Intelligence through the BusinessObject Launch Pad.
Please help!
-Janice

Hi
The patches for SAP BusinessObjects BI4.0 are accumulative. This means you can download the latest patch (for the Support Package that you have installed) and it will have all the patch fixes
It looks like older patches are being removed from the sites & only the most recent patch or patches are available since they are accumulative
I believe Patch 2.15 should now be available, but anything later than Patch 2.6 should help you in this instance
I hope this helps
regards...ian

Gauges/Dials in BO 4.0 Web Intelligence Reports

Hi All,
We are currently working on BO 4.0 and want to add Gauge in web intelligence report. As we know that, Gauge is not existing in the list of components provided by BO webI so we need to do some work around or even for the single value display which other component we can use in WebI.
Can anyone suggest how we can achieve the same?
Regards,
Tina Ailani
Edited by: Ailani Tina on Aug 25, 2011 6:18 AM

Personally, I'd do something like this:
Open Microsoft PowerPoint, use the drawing tools to create a thing that looks like a dial (with a needle).
Copy and paste it 8 times.
Move the needle on each so that's it in a different position.
Right click the shapes and click "Save as Image".
In Webi, add a blank cell where you want the picture to be.
Click the alerters icon in the toolbar.
Add some rule, for your measure (whatever should drive the needle of the chart).
Click the format button, and on this page, select an image for that sub-alerter.
I think 8 is the limit. You can always apply to alerters (each with 8 sub-alerters) to the same cell.

Have the URL to save the Web Intelligence Report to be saved as excel.

Similar Messages

Maybe you are looking for