Have this problem over a month now

Afternoon everyone,
Where should I start..
About a month ago my hub started resetting itself whenever I used internet, i spoke to numerous amount of people over at the call centre and about 2 weeks after calling them nearly every day they sent openreach engineer over to my house to check whats going on. He did what he had to do inside my house and outside my house, then he did some tests which all said "passed", but hey after the visit i went straight on my computer and checked the speeds which were at about 1mb at the time which still are not good enough considering i had 6-8mb about 3 months ago, anyway back on the subject i contacted bt yet again and they said the line needs to be running few days for the connection to stabilise. A week of waiting and still nonthing speeds the same and my hub was still resetting itself but not as often as it used to. After a week I decided im not going to bother with those useless people in the call centre so I emailed bt and started to explain my problem all over again, first they sent an engineer to my exchange to see whats going on there, still nothing improved after that. They then decided that they should send an engineer again which came to my house yesterday and replaced the master socket and also did other things which i didnt see. He then like the first engineer did some tests and he said that the speed hes getting from the master socket is 9.7mb i was all excited that i finally got back speeds i used to have about 3months ago but hey, went on the computer straight away after the visit and the speeds were at 500kb/s. I had an idea today that maybe i should bring my computer downstairs with the hub and connect it to the master socket but still nothing.. same speeds and the hub is still resetting from time to time, if i counted correctly the hub resetted 7 times today and 4/7 of them resets the hub didnt connect to the broadband for about an hour and on one reset it didnt connect for 4 hours the rest connected in about a minute. This is really going beyond a joke now, really unuhappy with the whole situation which i repeat had for over a MONTH now. Im thinking of changing to another ISP and as bt said if i change from bt to any isp the problem will still remain id prefer to talk to normal people and not the callcentre which as a matter of fact everybody knows is useless and you can barely understand what they are trying to say due to obvious reasons.
                                         TEST
Quite line is fine not much noise even though im using a cordless phone.
Connection information
Line state
Connected
Connection time
0 days, 0:57:48
Downstream
1,151 Kbps
Upstream
708 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
25.0 dB / 8.8 dB
Line attenuation (Down/Up)
42.5 dB / 21.8 dB
Output power (Down/Up)
20.1 dBm / 12.4 dBm
FAQ
Test1 comprises of two tests
1. Best Effort Test:  -provides background information.
Download Speed
622 Kbps
0 Kbps
1000 Kbps
Max Achievable Speed
 Download speedachieved during the test was - 622 Kbps
 For your connection, the acceptable range of speedsis 400-1000 Kbps.
 Additional Information:
 Your DSL Connection Rate :1148 Kbps(DOWN-STREAM), 708 Kbps(UP-STREAM)
 IP Profile for your line is - 750 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 11.79:25.54:62.8 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test:  -provides background information.
Upload Speed
572 Kbps
0 Kbps
708 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 572 Kbps
 Additional Information:
 Upstream Rate IP profile on your line is - 708 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit FAQ section if you are unable To understand the test results.
http://www.speedtest.net/result/1221794792.png
Thank you to anyone who will bother to read my rant, but hopefully im going to get my message across now....

rest of the stats : 
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
21.9 dB / 8.3 dB
Line attenuation (Down/Up)
42.5 dB / 21.8 dB
Output power (Down/Up)
20.1 dBm / 12.4 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
11189 / 22
CRC Errors (Down/Up)
8 / 2147480000
HEC Errors (Down/Up)
nil / 878043
Error Seconds (Local)
5

Similar Messages

Maybe you are looking for

  • How to retrieve 5th highest salary in a single statement

    Hi, How can we retrieve 5th highest salary in a single statement

  • Why doesn't my itunes recognize my ipod nano 6th gen anymore?

    I recently purchased a lot of new songs and downloaded the newest version of itunes.  Now when i plug my ipod (6th gen) into the USB to sync with itunes it shows that it is charging ("connected - eject before disconnecting") then it ejects itself and

  • Apple TV remote (left button) switches the TV input mode

    Often when I click the left button on my Apple TV remote while using the Apple TV, the TV (LED 1080p 60hz) switches to the analogue mode. I've tried to alter the settings, however I'm unable to remedy the problem. Any suggestions would be gladly acce

  • HT3775 how can I use this codes? and Where?

    I am trying to watch a Trailer for leapPad2 and I can't. It's showing me a massage that I need a special software for that and for more information press TELL ME MORE. When I do that it just showing me some codes. I don't know what should I do with t

  • IMAP sync issues

    Hi, I am having issues syncing a new Z10 over IMAP to SmarterMail mail server.  I posted on their forums and their responce was quite blunt: http://forums.smartertools.com/showthread.php/3847​7-Blackberry-Z10-IMAP Anyone else seeing this issue? Thank