Have Thundbolt on my mac will not work with my thunderbolt drive
I have a port on my Imac, but it will not work with my ThunderBolt Drive
Agree on cables, you don't want something generic when it comes to thunderbolt in my experience. It's thos accessories that add up and they are profitable for a reason. Cheap isn't always good with accessories.
Similar Messages
-
Mac will not work with Canon EOS cameras
My imac OS X 10.6 is not working well with my Canon EOS 5d Mark II camera on the tethered mode. The camera works well with other Mac computers, and I have spent hours with Canon tech help. It now seems that the issue may be with the computer. The EOS Utility is working, everything has been updated, all Canon checkpoints look good, but when I use the camera, the image does not transfer. And then everything gets locked into a loop and I have to crash the camera and force quit the program. Is there something in the computer that may be blocking the transfers? any ideas where to look? Canon has done everything on the camera side, but I don't know where to begin with the computer.
OH, ok. So the issue is with transferring the image from the camera to the computer. Since you said you have done everything possible with canon, the camera's firmware is completely up to date, you have the correct software installed. Since you say no cameras work with this computer I am inclined to say the problem is from the computer, which is why the problem exists. I'd do an apple hardware test and see if anything turns up. Clean install of the canon software would also be a good idea.
-
is there some driver or different switch that is compatible?
Hi..
Check the USB hardware website for support for Lion v10.7. -
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?
You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html
-
The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?
You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011 -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please
Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
I downloaded Firefox 4 and installed it. When I tried to launch it, a message came up saying that Firefox will not work with this version of Mac OSX. Now I have no Firefox. How can I get Firefox 3.6 back on my Mac? How can I make Firefox 4.0 work? Please advise.
Thanks for the reply so quickly! Is the tenfourfox going to be be just as safe and as high of quality as the Firefox 4? Also since Mozilla's website says, "Firefox 3.6.x will be maintained with security and stability updates for a short amount of time. All users are strongly encouraged to upgrade to Firefox 4" does that mean if I go back to 3.6 there will be security and stability issues after a "short amount of time"?
-
accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help
I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.
-
My old e-mail address was SHAW XXXXX.and worked very well with Thunder Bird mail. I recently switched to new ISP Bell and my new address is XXXXXX However with several attempts with techs ,Thunder Bird will not work with my new ISP. I had to start using Outlook.com and Outlook Express 6 for e-mail,but I really liked Thunder Bird and have numerous e-mails stored in it that I cannot import.
Outlook Express 6 is outdated and because I am running Windows XP it will not give me a newer version.I find Outlook.com confusing to me. Can you helpWhy don't you tell us what you did and why it didn't work? Start from File/New/Existing Mail Account, enter your details, click Continue, then immediately click Manual config. On the next screen enter these settings:
incoming POP server: pophm.sympatico.ca
port: 995
Connection security: SSL/TLS
Authentication: Normal password
User name: your full email address
outgoing SMTP server: smtphm.sympatico.ca
port: 587 (or try 25)
Connection security: STARTTLS
Authentication: Normal password
User name: your full email address
http://support.bell.ca/Internet/Email/How-to-use-Bell-Mail?step=3
Also, enable POP access as mentioned in the link. -
I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?
You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
-
Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have restalled itunes, but it will not work.. it won't open?
Hi I have spent most of the week trying to get itunes to work, and i have had no luck
I have unstalled and restalled and it still will not work.I have done what you have suggested and it still will not work,
I need to reset my ipod and i can't do that without itunes.. HelpHi there Earlsdon28,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1421
-Griff W. -
Lion - 2004 MS Office for Mac will not work
My 2004 version of Microsoft Office for Mac will not work in Lion. I suspect because this is a PowerPC application. My question is this:
Is there any program out there which will map the PowerPC to an Intel format? Other than trying to seel more products, I am surprised that Apple does not supply a mapping program for products made by Microsoft for the Apple devices.Eric, can you tell me where please? It's not mentioned on the Lion compatibility pages at all. (http://www.apple.com/uk/macosx/what-is/compatibility.html) nor on the 'how to upgrade' page (http://www.apple.com/uk/macosx/how-to-buy/)
Maybe you are looking for
-
i want to generate the XML document in tree structure format by writing the Pl/sql
-
Dynamic file names in outbound file adapter
I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file. Name of input file won't be always the same (*.dat) so i cannot har
-
Adobe Acrobat Pro 9 Stops Responding
I work in IT as desktop support for a city. We have a user that is always calling and saying that she cannot open PDF files. What happens is that Adobe Acrobat Pro 9 stops responding and you must go into Task Manager and kill Acrobat.exe. We've taugh
-
Space images in Horizontal scroll
Being new to AS and Flash 8 I am using an online tutorial as a guide to the creation of a horizontal mouse driven scrolling gallery. I was hoping to use the model script and make simple adjustments of file names and loading specs but it has gone beyo
-
ITunes wont alter iPod after initial sync
ok i have this annoying problem that isnt a huge deal but is a pain the ... bottom?!?! anyways whenever i plug my 5g 30gb iPod into my AMD 3400 win XP Pro it syncs, but then while it is still plugged in any other changes that are made to podcasts etc