Have to click back button multiple times
I have seen same problem posted, but no resolution that has worked for me. On some sites, once I click on a link (once), I have to click the back button 2-3 times to get back to the page I was originally on. If I right click on the back button, I see that 2-3 copies of the linked page are in the back button history. This happens a lot on cbsnews.com. If I click on a photo list on that site, it will load 2-3 copies of every single picture that I look at. I have tried running firefox in safe mode, but the same thing happens. If I visit the site using Chrome, it does not happen. This has been happening since version 29.0; I am currently running 31.0 for windows (8.1).
Hi there. I avoid that issue by clicking the link I want to check and
selecting '''open new tab / window..''' This way the page I left will
still be waiting for me.
Also, right click the back arrow and choose from the menu.
Similar Messages
-
every page on every open tab refreshes every 30 seconds and each time it is saved in my cache. If I want to go back to a previous page, I have to click back once for every 30 seconds I was on the current page. Very annoying!! It just started doing this recently and I don't know why. I did reset the about:config to "0", but that didn't help.
'''Reload Every''' doesn't appear in the More System Details attached to your initial posting here, you have something else going on there.
'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
Or it might be caused by Hardware Acceleration.
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
If i click a link multiple times, it should open only a window(login popup window), but it opens multiple windows.
This does not happened on any other browser(IE, Chrome, Safari, Opera).<br />
If this helps i'm using a jquery plugin popupwindow( http://rip747.github.com/popupwindow/ ).A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum. -
Clicking Back button twice in IE7 to get previos page in our WL portal.
Hello,
we are developing weblogic portal application.
And have noticed that on the all our pages(we have JPF and JSR portlets) we have to click Back button twice in Internet Explorer 7 to get previous page.
We haven't got such issue when we use FireFox, Opera or Chrome, please advice, what we can do to fix this issue.
Thank you very much!Thank you, deepshet
Now I have discovered that weblogic generates url with fragment identifier at the second step.
When I call page for example News_page from previous page Main_page, I use the following link
http://localhost:7001/MyPortal/appmanager/TestPortal/TestDesktop?_nfpb=true&_pageLabel=News_page
after loading (about 1-2 seconds) to url addeds fragment identifier *#wlp_news_page*, so the resulting page will be
http://localhost:7001/MyPortal/appmanager/TestPortal/TestDesktop?_nfpb=true&_pageLabel=News_page*#wlp_news_page*
At this moment when I click back button in IE I will get
http://localhost:7001/MyPortal/appmanager/TestPortal/TestDesktop?_nfpb=true&_pageLabel=News_page
for the first time.
And after my second click I will be returned to Main_page.
Please advice how can I avoid such behaviour?Is it possible to turn off fragment identifiers on portal?
Thanks -
I have attempted to install iTunes multiple times but to no avail. I have installed every file, and followed every instruction on the support pages. I click download, and it takes me directly to the "Thank You for Downloading" page without doing anything. I am running it on FireFox, and I have tried with Internet Explorer, neither have worked. I have been trying to do this for weeks now, and I am getting majorly frustrated. Please, help.
Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.
-
Help - HP Pavilion a6030.uk desktop. Have to press the power button multiple times to start up?
Hi,
I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.
My computer has had no problem at all until yesterday for some reason i had to push the power button multiple times to start it until it finally turned on and did the normal start up. Such as i would press the power button as normal to start it, but all of a sudden, it would turn off after about 2 seconds, and so I would press the power button several times and each time it would not start up and turn off, so the power button would be pressed again until it would finally turn on and start up and run as normal and seems to work fine. And it was the same today, i pressed the power button mutiple times (e.g. 6 times) until it finally started as normal.
As im not very knowledgeable or very computer/technology savvy wise in this area, please will someone help me and give me some advice/help to fix/solve this.
Thankyou for taking time to read this and any help would be much appreciated to resolving this problem.
Thanks.
This question was solved.
View Solution.Vonbon90, welcome to the forum.
When I see these symptoms on an older computer, I believe that it may be a failed/ing power supply unit (PSU). Here is a guide that will help your troubleshoot it.
Also, you could test the memory. This can be done by removing all of the memory modules and replacing them one at a time and booting.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Hi my question is how can I sort and delete photo files which I have had backed up multiple times? Another way how can I get rid of from the duplicate?
Provide the name of the program you are using so a Moderator may move this message to the correct program forum
The Cloud is not a program, it is a delivery process... a program would be Photoshop or InDesign or Muse or ??? -
My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear....please help!!!???
Do a reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
I get a message stating MSVCR80.dll is missing. How to fix? I have removed and re-installed multiple times.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Old topic: Refresh when user click back button
Yes yes, i know, this is old topic, which already discussed thoroughly in the forum,
But, pls read my question....
i try this:
res.setHeader("Cache-Control", "no-cache");
res.setHeader("Pragma", "no-cache");
res.setDateHeader("max-age",0);
res.setDateHeader("Expires",0);
res.addHeader("Cache-Control", "no-store");
However, when i forward to a page, then click back button to the previous page, which have the code above, however, the page is still the old one, the page was not reloaded from server
Any suggestion? 1:57 am, my local time.......I just use:
response.setHeader("Pragma","no-cache");
response.setHeader("Cache-Control","no-store");
response.setDateHeader("Expires",0);I have tried this, still the same...what can i do? Any more workable solution? -
I need to have both Next & Back buttons displayed for viewing 20 records at
Hi Everybody,
I have a JSP page which has 2 part: The header (Selection for search with the SEARCH button) and a search result table.
Is it possible to remember the last record printed & start from the next record when I click on "Next" button? When I click on the "Next" button will it create new page? I need to have both Next & Back buttons displayed for viewing 20 records at a time.
The current JSP is using "session.removeAttribute("XXXWorkItemVector") to print out records.
I'm very new to JAVA and JSP, so please help me with my assignment and send me e-mail to [email protected]Check this:
http://forum.java.sun.com/thread.jsp?forum=45&thread=188239
This should be of help to you. -
Can I have the same printer installed multiple times under different names?
On WIndows I have the same printer installed multiple times
All using the same driver
I have a Canon printer that has a rear tray and a bottom tray
So, I will have one printer that prints to the rear and the other to the bottom
Other printers (the same one) will be set so that they print in high quality and in duplex for example
I'll name the printers 1.Canon 2.Canon 3.Canon etc
So, when I go to print, I just hit a number on the keyboard and the printer I want is selected
Can I do the same on my laptop?
Thanks
OmarBack Up - that's in case things go wrong.
In the case you cite:
You have
Mother
Mother Maiden Name
as Faces, right?
In the Corkboard view click on Mother Maiden Name and delete the 'Maiden Name'.
It will disappear and all the photos will be in the Mother face.
Note that 'Mother' and 'Mother ' (that is, with a trailing space) are not the same.
You can also just edit the name 'Mother Maiden Name' to 'Mother'
As for photos staying in manual sort, I can only say that mine do. But as I've no idea what troubleshooting steps you've used.
Regards
TD -
Cannot click back button on Internet Explorer,
Dear Sir,
In content Management of EP6 SP14, KM content we cannot click "back button" in IE menu. if we click back , it will show the error.
How to solve this problem.
Thank you and best regards,
VimolHi Vimol,
you can not solve this problem. The browser functions 'back', 'forward' and 'refresh' do not work properly on SAP EP 6. That's why you find the navigation links and the portal history in the portal header.
There is a feature called 'External facing portal' or 'EFP' that solves your issue by rendering one HTML file for every portal page. But you'll have some restrictions concerning business packages, KM and collaboration when using EFP.
There are a lot of threads in SDN about EFP, but here is an entry point:
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/43/13fd52a5732ba9e10000000a1553f6/frameset.htm">Implementing an external facing portal</a>
Please be aware that EFP comes with NW2004s SPS6
HTH,
Carsten -
Invalidate session when user clicks back button
I want to invalidate the session when user clicks back button, so that user cannot refresh and reload a page.
Any suggestions will be highly appreciated.
Message was edited by:
sam_amc* SessionInvalidator.java
* Created on October 27, 2006, 9:18 AM
package web;
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
* @author javious
* @version
public class SessionInvalidator extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
String reposted = request.getParameter("reposted");
if("true".equals(reposted))
HttpSession session = request.getSession(false);
if(session == null)
// This is step 4 and beyond
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet SessionInvalidator</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
out.println("I said, your session is now invalid! Now where are those Duke Dollars at?");
out.println("</body>");
out.println("</html>");
else
Integer hitCount = (Integer)session.getAttribute("hitCount");
if(hitCount == null)
// This is step 2 (the "good" - "stay" page.)
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet SessionInvalidator</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
out.println("Your session is good.<br>");
out.println("If you click the browser's back button, you will invalidate your session.");
out.println("</body>");
out.println("</html>");
hitCount = 1;
session.setAttribute("hitCount", hitCount);
else
//We've used up our good visit
session.invalidate();
// This is step 3
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet SessionInvalidator</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
out.println("Your session is now invalid");
out.println("</body>");
out.println("</html>");
else
// because the javascript in the following output will never allow a user
// to continue clicking back any further than this, we can safely create the session.
// (or perhaps the session can already be created here and this may not be necessary).
// A problem lies where if the user chooses to "select" a page back in history they thereby
// potentially skip back "over" this functionality, thus defeating the purpose of it.
request.getSession(true);
// This is step 1 (indirection)
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet SessionInvalidator</title>");
out.println("</head>");
out.println("<body onload=\"document.getElementById('invalidatorForm').submit()\">");
out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
out.println("<form id=\"invalidatorForm\" action=\"SessionInvalidator\" method=\"POST\">");
out.println("<input type=\"hidden\" name=\"reposted\" value=\"true\">");
out.println("</form>");
out.println("</body>");
out.println("</html>");
out.close();
// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
/** Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
// </editor-fold>
}The problem with even attempting to do this is that with today's browser capabilities, users can optionally choose to jump to a particular page in the browser history and this may not necessarily be the most recent page. In this case, you would also want to invalidate the user's session after already having been there (whatever page that may be). Then you have situations when the user may wish to jump back in history to external pages they were visiting before they reached your own site's pages. Then what happens when they start clicking forward, forward, etc... from there? This is why I prefer writing Swing Clients as alternatives to browser applications. There are soo many possible ways break web applications made for standard web browsers both maliciously and simply by accident or irregular user patterns. Regardless, this servlet would work based on the assumption that all the user(s) would "ever" do aside from moving logically forward is clicking on the browser's "back" button.
cheers!
Message was edited by:
javious -
Why must I click the button two times to update the data?
Dear All,
I have written a simple vi about event case. I have found that I must to click the button two times to updata the data. I don't know why.
And I can't use the stop button to stop the vi.
Could you tell me the reason?
Thank you very much.
Attachments:
event case.vi 42 KBHi,
1 : you have a "timeout case" but no timeout linked, so you lose the advantage of the event structure !
2 : make a event for "stop" on value change
3 : its normal, because le control terminals were out of the event struct, run it in high light mode you'll understand
Remark : instead of having to clic a boolean to refresh the indicators, why don't you make a "value change event" directly on the control ?
I modified your VI following step 1,2,3 above
Hope this helps
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
event case.vi 17 KB
Maybe you are looking for
-
Bad quality of X1. Lack of customer empathy. More than 3 weeks to repair already. SAD.
Frustration over the build quality of the X1 carbon ultrabook and the warranty service aspect of it. Bought in September 2012 for a student. Simply stopped working 3 weeks back and given to Palo Alto service center. They sent to some factory for fixi
-
Temporary email address in Transaction ME21N
Experts I want to maintain (temporary email address in Transaction ME21N) e-mail address in the PO header details of the vendor and the system has to send the PO from the temporary email address. But it is considering from the vendor master only .How
-
hi. we have a purchase requisition release strategy and our 1st release is pre-requisit and any of the rest 7level/release code can release once initial release done. (Once the release is effected by initial release code, any one from rest release co
-
Restriction on memory scope for UI components binding
Hello I'm using JDeveloper 11g 10.1.1.3 I found in the Fusion Developer's Guide for Oracle ADF (14 Getting Started with ADF Task Flows) next thing: <i> Restrict the scope of the managed bean that you reference through a UI component's binding attribu
-
Final Step away from Windoze (Need help) [easily SOLVED]
Hi all, I am preparing to take my final step away from windows OS, as the more I learn about Linux, the more I detest the majority of my hard drive being dedicated to a monopolus (if that's a word), closed monster. However there is one thing that I n