HAVE to downsave in CS3 or it will crash

Does anyone have any ideas with this?
I have CS3, but have never been able to save any of my files as CS3 documents. I always have to save down to (eg. Illustrator 8 or Photoshop 8). I have tried reinstalling the whole program, but it doesn't make a difference. I crash quite often using all 3 Indesign/Illus/Photoshop and wonder why. I am running on a PC. Had run these programs on a Mac in the past and never had such issues.
Any help or suggestions would be greatly appreciated!

I run (or am trying to run) CS3 on Windows Vista.
I have not checked my hard drive for directory corruption, to be honest I wouldn't even know how to do so.
I have consulted a IT guy (not from Adobe) but he is asking for a specific error message, or a specific task that I do that crashes, but there really isn't anything specific. It has just never saved higher that Version 8. And continues to crash on a daily basis. It is my work computer, so I am responsible to have it running smoothing, but I am no IT guy that's for sure.

Similar Messages

  • HT1338 We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    Check the Adobe website for compatibility.
    Ciao.

  • I have a license for CS3 Design Premium but no disk. Where exactly can I download the software? The solution offered on the Adobe website does not work ...

    I have a license for CS3 Design Premium but no disk. Where exactly can I download the software? The solution offered on the Adobe website (CS3-Produkte herunterladen) does not work ...

    If the page you linked does not work then it should so what happens when you try?  It is possible that it might be a simple matter of you enabling cookies or trying another web browser.
    You can also try to download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Flash cs3 "Motion tweening will not occur on layers with ungrouped..."

    I am getting the error message: flash cs3 "Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol"
    I have only one symbol in the layer, a graphic.
    Does anyone know how I can correct the "problem"?
    Thanks in advance.
    karen.

    as the above poster mentioned I am guessing you have more than one object on that layer. you may have created a symbol from a shape and not selected the stroke.. that is pretty common.
    to verify what is on a particular keyframe do a "select all" cntrl-a or cmd-a. maybe you will see more than one item selected.
    look at the properties panel. if you have only one thing it will note the symbol or it will say "mixed".
    perform this test in the first and last keyframe.

  • Dreamweaver CS3 Backwards Compatability will CS5?

    If I export my site onto a memory stick on CS5.5 will I be able to import it and use it on my laptop which only has CS3 installed?
    I did a bit of searching but couldn't find what I was looking for,
    Many Thank,
    Alfie

    Ideally when you work in the Dreamweaver and craete the website then you save the website in a generic web format like HTML or etc which can be opened by and web design tool and any veriosn of the Dreamweaver.
    It is similar to JPEG from photoshop , it is a generic format hence I can open the same jpeg file in Photoshop's older veriosn, Illustrator all verion and any other tool that support jpeg file format.
    Same goes with the HTML you can open the website created through Wordpress in dreamweaver because HTML is a generic format.
    However you may have issue with teh objects on which the new feature of cs5.5 would have been used as cs3 doesn't support , similar wordpress file may not open exazctly the same as I have drafted it

  • When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected.  It

    When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected.  It was working great for the first week that I used it, but now it doesn't give me the converting option.  I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday.  All I want to do is very simply, convert pdfs to Word.  I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through. 

    Hello Kathie,
    Sorry for the inconvenience that has caused to you.
    Please let me know if you have tried converting any other PDF to word with Reader.
    Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
    Let me know if this converts fine.
    Hope to hear from you.
    regards,
    Anubha

  • I have an alert message in safari that will not let me exit safari. I tried the force quit did not work

    I have an alert message in safari that will not let me exit safari, I tried to force quit but it would not let. What do i do next?

    Shut it down and when it says to reopen windows disable it

  • I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

    i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

    On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
    On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

  • My iphone 4s will not allow me to open any apps that I have downloaded. I have tried a few things but still will not allow me to open. Shows they are open once pushing the home button twice. Please help!

    My iphone 4s will not allow me to open applcations that I have downloaded. I have tried a few things but still will not allow me to open. Shows they are open once pushing the home button twice. Please help!

    Pressing the Home button twice does not show you what apps are running. It shows you what apps were recently used.
    Download a free app from the App Store. Once it downloads, your other apps should work properly again.

  • I have zinced songs from my PC to my iPad  and it has copied all the songs on my pc but some are showing very faintly on my iPad and these songs will not play. I have tried to delete them but they will not stay hilighted and show delete to enable me to do

    Can anyone help me to delete the faintly listed songs on my iPad which I have transferred from my Pc but they will not play on my iPad.

    Thanks for trying to help me. 
    First, in you reply (and i've read this elsewhere), you imply that i need to check a box that says "manually manage music."  OK, great, but where do i find such box?  Is that on the iphone or in itunes?  Also, i am afraid of losing what i already do have on my phone.  I have about 150 songs, some of which were purchesed thru itunes, but most of which i "dropped and dragged" from my older computer with the older version of itunes.  When i go to itunes with my iphone plugged in, all of the boxes are grayed out, except one at the top that says "Sync Music".  When i check this box, i get an error warning that says "Are you sure you want to remove existing music, movies, TV shows, books, and tones from this iPhone and sync with this iTunes library?  Music, movies, TV shows, books, and tones synced to [name of my iPhone] from other iTunes libraries will be removed and items will be synced from this iTunes library." 
    So, i have over 3000+ songs in my itunes library on my computer... obviously that isn't going to fit on my phone. So then, what is going to happen?  I'll lose everything that is already on my phone PLUS it will NOT be able to sync? 
    Is now the time to buy a Zune?!?  For the company that is supposedly "user friendly", Apple has really managed to screw this one up. 
    Thanks, John

  • I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

  • After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version"

    After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version".  Any help will be greatly appreciated.

    Sorry,
    Yes, the error message is exactly like that  ("Database error: failured to persist version")
    No photos will import at all.  I use USB to import from iPhone 5s or iPad 2. 
    About the difference?  iPhoto and Photos .  Are there two softwares?
    I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro,  iPhone 5s and iPad hard drives using iPhoto.  It's call iPhoto library.  At one point I turned off streaming. 
    Thanks again Larry HN.

  • I have iphoto 9.2.1 and it will not load. The loading screen after I click on the app keeps circling. Can anyone help Please?

    I have iphoto 9.2.1 and it will not load. After I click on the app it opens but the screen continousley tries to load. Please Help

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HT5621 Me and my daughter are using the same Apple id and we share the same iCloud account. I want to change her Apple id so that she will have her own icliid account and I will have mine. how do I do it?

    Me and my daughter are using the same Apple id and we share the same iCloud account. I want to change her Apple id so that she will have her own icloud account and I will have mine.
    1. how do I do it?
    2. how do I  transfer her stuff which is in my icloud storage to her new icloud account once this one is created?
    thanks,
    Ari

    To migrate her device to a new account, start by saving any photo stream photos she wants to keep to her amera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow, then tapping Save to Camera Roll.  If she is syncing notes with iCloud, you'll need to open each of the notes and email them to her so she can later copy and paste the text into new notes created in her new account.  Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), choose Keep on My iDevice and provide the password to turn off Find My iPhone.  Then sign back in with a different Apple ID to create her new account and choose Merge to upload the data.
    Once you are on separate accounts you can each go to icloud.com from a computer and delete the other person's data from your account.

  • I have songs in my iTunes App that will not play.  It keeps saying that this computer is not authorized to play would you like to authorize it.  I would but its asking me to authorize an account that was changed.  What do I do????

    I have songs in my iTunes Application that will not play.  I keeps saying that this computer is not authourized to play name of song would you like to authourize it.  The problem is its the old account I had and that has been changed.  How am I going to authorize these songs when this account no longer exists.

    I posted about this yesterday -- it happened to me, and the solution was incredibly simple. An Apple tech guy had me delete my SC Info Folder, located on my XP in Application Data.
    Here is my post:
    https://discussions.apple.com/message/15134112#15134112
    Here is the link about the SC Info Folder (4th down):
    http://support.apple.com/kb/TS1389?viewlocale=en_US
    It wasn't every song, just a few of them. A nightmare to figure out what to do, but it was solved upon reboot.

Maybe you are looking for

  • How to add specific header and footer to flat file using SSIS 2008

    The SSIS package need to create file  with headers, totals and adds a status to position one of the records. Header: "$$ADD ID=ENTK0557 BID='IA   HBZAC14HBZACHRYCORP' PASSWORD='CUSTOMER        ' %AU HBZAC14" is added. $$ADD = Static ID=ENTK0557 = Sta

  • Warning Message Should come if actual delevery date is before planned date

    Dear all; is there any settings to set Warning Message if actual delevery date is before planned delevery date mentioned in the PO? Thanking You; Regards; Joydeep Mukherjee

  • Windows 7 Lightroom 4.3 64-bit install

    I download and install the program and can successfully go into the Library.  But when going into the Develop Module I receive an error message that says, Adobe Photoshop Lightroom 64-Bit has stopped working.  When downloading from Adobe I first make

  • Duplicate flows and inactive objects after BDLS and Merge

    All, Our team is facing a number of issues with a test environment created using BDLS. As well as inconsistencies in the inactive/active statuses of objects between the development environment and BDLS created test environment, we are facing issues w

  • Have a error when active Catch Weight Managerment

    I have a DEV server ( oracle 10.2 g, SAP ECC 6.0 SR3) with 3 software component :  SAP_APPL, SEM-BW, IS-CWM is not the same level. I want to test function Catch Weight Management in client 100 of system and  I have two case Case 1: I update 3 softwar