Have to keep resetting the service number

I have got a new i phone 4s and my old i phone 3 number was transfered over to my micro sim in store, the problem I am having is ever day I have to reset the service number as it keep going back to a pay monthly one and im on pay as you go. is there any ideas on what to do

If there is, I haven't found it. Every couple of days I toggle the setting off and on to get it to work again and it lasts for two or three more days, then I repeat the process. I have reset all settings and restored my iPad and I still can't get to work reliably.

Similar Messages

Poor Internet Connection/Have to keep resetting the modem

For the past two months our internet service has been terrible. I've had numerous phone calls with Verizon tech support and had two technicians visit our house. Needless to say, after all new wiring in our house, updating the lines outside our house, and a new modem I still have to reset the modem several times a day and then when the internet does work it is extremely slow. The technician said my house and my neighbor's house don't even show on the grid for our local Verizon office and that the problem is somewhere between our road and their office........so how does that get fixed? Apparently the lines are too busy and it just keeps kicking us off. Has anyone else experienced a problem like this? I work part time from home and rely on my internet service. I also don't have the time to contact Verizon every single day! Help!

Hi country105,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

TS1702 My TomTom does not work following the upgrade to IOS 6.0 - I am getting poor GPS reception on my iPhone 3 using my TomTom car kit ( worked fine prior to upgrade!). I have tried to reset Location Services with no luck! - Help...

My TomTom does not work following the upgrade to IOS 6.0 - I am getting poor GPS reception on my iPhone 3 using my TomTom car kit ( worked fine prior to upgrade!). I have tried to reset Location Services with no luck! - Help...

Aa2009 wrote:
he could have a 3gs but doesn't state 3g or 3gs
Look at his tag line

AFter the latest download, my e-mail service keeps getting a bar at the top "Firefox prevented this page from automatically redirecting to another page". I have to keep hitting the "Allow" link? How do I get rid of this?

Ever since the last update, I'm having problem accessing my e-mail account. I keep getting an annoying bar at the top of the screen "Firebox prevented this page from automatically redirecting to another page." I have to keep hitting the allow button, sometimes twice. And when I do get into the accounts the bar jumps in and out every time I open a new e-mail, or delete and old one.
How do I get rid of this. I've had this account for years, with a very reputable private e-mail provider. This is nuts.

See:
*Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
See also:
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel#General_tab
*http://kb.mozillazine.org/accessibility.blockautorefresh
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

Iphone 4s freezing at start up then shuts off and keeps restarting then repeating that process over and over. I have tried to reset the phone two different ways and still this problem occurs after I update it or turn off the phone.

yes the title says most of what is going on.
I recently reset my phone, losing all contacts and pictures. It was working fine, then after I updated it, it will not turn on completely.
It starts up with the apple logo
-goes to the ios 6 (please slide to open) screen
-then shuts off
-and repeats the process unless I shut the phone off manually
I have tried to hold the lock and the home button down to manually reset the phone
I have also tried reseting the phone completely previously, and I still have this problem.
Any ideas?
Thank you!!

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

Not able to reset the page number in XML Publisher based on each PO

Not able to reset the page number in XML Publisher based on PO
Hi,
I have created a custom purchase report and rtf template. In the rtf template, I have added the page number feature (i.e. Page 1 of 5) from Word in the template. When I run the report for a range of POs, I expect the results as follows:
I have given 3 POs on single request. (PO#1 has 3 pages, PO#2 has 2 pages and PO#3 has 4 pages), the page number on each PO should look like as follows:
PO#1 page 1 of 3, page 2 of 3, page 3 of 3
PO#2 page 1 of 2 page 2 of 2
PO#3 page 1 of 4, page 2 of 4, page 3 of 4 and page 4 of 4
But the page number displays on each PO as follows:
PO#1 page 1 of 9, page 2 of 9, page 3 of 9
PO#2 page 4 of 9 page 5 of 9
PO#3 page 6 of 9, page 7 of 9, page 8 of 9 and page 9 of 9
Here I have to reset the page number based on each PO. If anyone done this already, can you please share with me.
Thanks,
Ram.

Hi
One clarification please.
Are you putting Page # of ## in the for-loop section? I mean it should be within For-each@section block.
Even if this doesn;t work, then try using Insert->Page Break after every PO.
Regards
Varun

What is the service number in INTEGRATION_DIRECTORY_HMI

Can any one tell me What is the service number in INTEGRATION_DIRECTORY_HMI.
Is it J2EE PORT (THE WE FIND IN xi home page URL)OR HTTP PORT (the one we find in SMICM > Goto > services)
-Naveen.

Hi,
It should be 5<Java inst no.>00
Also have a look into this document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards,
Prakash
Message was edited by: Prakash Arunachalam

I was recently given Adobe Premiere Elements 9, it keeps saying the serial number on the box is invalid. What can I do?

I was recently given Adobe Premiere Elements 9 from a friend who no longer uses it and knew I was interested in it. but when it comes to installing it, it keeps saying the serial number on the box is invalid. What can I do?
I have tried entering it all different ways. I'm not dumb I know which one is the serial number this isn't my first Adobe product. Any help would be welcomed.

Error "The serial number is not valid for this product" | Creative Suite

Is it possible to rename photo in the "camera roll" OR reset the photo number in iphone 4s? (Clearly explained the situation)

Hi everyone, nice to meet you all. This is my first discussion starting in here and nice to meet you all. I used Android device before and this is my first apple mobile that I owned. I am using iphone 4s. (5.0.1)
I have search a lot but no answer that how can I rename the photo in the camera roll in iphone or in Windows 7.
What I want to do is:
I have IMG_0006, IMG_0007, IMG_0015, IMG_0016, IMG_0017, total 5 files.
I want to change the name that make their sequence will become IMG_0001, IMG_0002, IMG_0003, IMG_0004, IMG_0005 and I want the following picture will take place in IMG_0006. (This is just what I want but it never happened)
but seems that I can't rename them and I have tried that if I take 2 pictures after IMG_0017, but I delete them (which is delete IMG_0018 and IMG_0019), then take another new picture again, it will name as IMG_0020 instead of IMG_0018.
Questions:
1. Are there any methods to reset the photo number by deleting file under the "PhotoData" that we can see in iPhone Explorer?
OR
2. Are there any methods to rename the photo in the "camera roll" folder?
I have tried to rename the photo directly in iPhone Explorer but it will make the photo cannot be read in iphone.
3. Is it possible that I can rename them directly and rebuild the camera roll by deleting the Photos.sqlite under the PhotoData folder to solve the unreadable problem in iphone 4?
Thanks a lot to read all of the words above

Thanks for your quick reply. I think I have tried but I cannot.
There are no any options to let you choose "rename" in Windows 7 if you connect the iphone via USB
I have tried to rename the photo directly in iPhone Explorer but it will make the photo cannot be read in iphone and just got nothing to show on its screen until I rename it into the previos name again then the picture will show properly.
May be it can but I do not know how to rename them in Windows 7, could you please show me step by step?

My iPad has been stolen. The police have asked me for the IMEI number. How do I get a hold of my iPads IMEI number now that it is gone?

My iPad has been stolen. The police have asked me for the IMEI number. How do I get a hold of my iPads IMEI number now that it is gone?

If you still have the box it should be on it. Otherwise you might want to try contacting your Cell carrier. They should have the IMEI that was registered with them for cellular service on the iPad.

Howto reset the system number?

I have downloaded the new license key for my new system file but by mistake imported the old one. Now I can't import the new one - get general error. How do I reset the system number? I suspect the license manager tdoes not take it because the the system number differs from the one which is in the file.
thanks

https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode1-5&contenttype=url&content=https://SAP Business One SDK

I do not want to upgrade to 7.0, I am attending online college and the upgraded version does not work with my school. How can I stop Firefox from upgrading? I have to keep uninstalling the upgrade and installing the old one.

How can I stop Firefox from automatically upgrading? My on-line college is not compatible with the upgraded version. I have to keep uninstalling the new one and reinstalling the old one.

It's not a good idea to allow websites to redirect to another site until you know for sure the original site is trustworthy.
But if you still want to do it (again not a good idea).
Tools>Options>Advanced>General - In Accessibility, uncheck "warn me when web sites try to redirect..." option.

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer? I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer?
I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

All of a sudden, my ipod touch will only recognize/play purchased items. I then have to completely reset the ipod and re-sync. I've had to do this 6 times, and support has been no help.

All of a sudden, my ipod touch will only recognize/play purchased items. I then have to completely reset the ipod and re-sync. I've had to do this 6 times, and support has been no help.

So you also rebooted your router correct? Does the iPod still connect okay to other networks?
B-rock

TS1559 hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help

hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help

Thank you. I will try your tip. And if it works, I'll give you 10 points . But now its been charging for hours and its still the same . But thank you!

Have to keep resetting the service number

Similar Messages

Maybe you are looking for