Have to keep restarting network daemon
I have my netowrk setup as DHCP as a static IP doesnt seem to want to work at all
This is a fresh install so I'm trying to download packages and it will download 20 or 30 megs and then suddenly quit. I have kill pacman, delete the db.lck file, and run /etc/rc.d/network restart in order for it to continue
I finally got a pacman -Syu to run all the way through and even after that it still continues to give me this problem
I dont believe it is hardware problem because I do not have this problem in Windows.
dmesg | grep eth0 just fills up my screen with lines that say eth0: link is up
Tried different network cable just to be sure, and that's not the issue
Thanks
Last edited by Marklar (2011-10-24 04:37:09)
Module Size Used by
snd_hda_codec_hdmi 22092 4
nouveau 698515 1
snd_cmipci 32405 0
ttm 54360 1 nouveau
gameport 8163 1 snd_cmipci
drm_kms_helper 25409 1 nouveau
processor 24256 0
drm 183380 3 nouveau,ttm,drm_kms_helper
snd_opl3_lib 8726 1 snd_cmipci
snd_mpu401_uart 5979 1 snd_cmipci
snd_rawmidi 19519 1 snd_mpu401_uart
snd_seq_device 5268 2 snd_opl3_lib,snd_rawmidi
shpchp 26249 0
sg 25557 0
snd_hda_codec_realtek 294224 1
evdev 9530 0
i2c_algo_bit 5199 1 nouveau
mxm_wmi 1393 1 nouveau
video 11228 1 nouveau
snd_hda_intel 22122 0
snd_hda_codec 77927 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
i2c_i801 8187 0
intel_agp 10904 0
intel_gtt 14423 1 intel_agp
iTCO_wdt 12717 0
pcspkr 1819 0
i2c_core 20133 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
iTCO_vendor_support 1929 1 iTCO_wdt
wmi 8411 1 mxm_wmi
snd_hwdep 6325 2 snd_opl3_lib,snd_hda_codec
snd_pcm 73856 4 snd_hda_codec_hdmi,snd_cmipci,snd_hda_intel,snd_hda_codec
snd_timer 19416 2 snd_opl3_lib,snd_pcm
snd 57786 12 snd_hda_codec_hdmi,snd_cmipci,snd_opl3_lib,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6146 1 snd
snd_page_alloc 7121 2 snd_hda_intel,snd_pcm
pci_hotplug 25672 1 shpchp
mei 31249 0
button 4470 1 nouveau
r8169 42643 0
mii 3995 1 r8169
ext4 369556 3
mbcache 5817 1 ext4
jbd2 71074 1 ext4
crc16 1297 1 ext4
usbhid 35256 0
hid 81635 1 usbhid
sr_mod 14951 0
cdrom 36329 1 sr_mod
sd_mod 28307 5
pata_acpi 3376 0
xhci_hcd 70396 0
ata_piix 22005 4
libata 173297 2 pata_acpi,ata_piix
scsi_mod 131482 4 sg,sr_mod,sd_mod,libata
ehci_hcd 39511 0
usbcore 142544 4 usbhid,xhci_hcd,ehci_hcd
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 6 Series Chipset Family 4 port SATA IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05)
00:1f.5 IDE interface: Intel Corporation 6 Series Chipset Family 2 port SATA IDE Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation Device 1201 (rev a1)
01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1)
03:00.0 PCI bridge: Device 1b21:1080 (rev 01)
04:00.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Similar Messages
-
Why do I have to keep restarting my ipad2 to download my emails even though it is connected to my home wifi perfectly, Internet is working, but the circle just spins constantly and won't update ??? It is very frustrating !!!
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
I can go on it for about 10 secs then it freezes,
i have to keep restarting it and it doesnt show up on
itunes when i try to restart it please HELP!! >.<
HASNT BEEN JAILBREAKED ASWELL- Try a reset. Nothing is lost
iOS: Troubleshooting applications purchased from the App Store
- If still problem, see it iTunes nows sees the iPod so you can restore the iPod.
- Next see if placing the iPOd in recovery mode will allow a restore. For recovry mode:
iPhone and iPod touch: Unable to update or restore
- Last, try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have to keep restarting my phone to be able to send messages ever since new update
Hi - try this thread
https://discussions.apple.com/message/23280703#23280703 -
TS2972 Have to keep restarting iTunes for homeshare
I replaced my two Apple TV 2s with Apple TV3s, and now I have to keep restarting iTunes on my iMac to see my libary.
It was flawless before. I very rarely had to restart iTunes.
I have an iMac (2011, i7), hardwired to an airport extreme, and then the two Apple TVs are hard wired as well.
I'd blame the ATV3s, but I also can't see the library on my iOS devices unless I restart iTunes on the iMac regularly.
Thanks for any assistance.Same issue here :-/
One Apple TV2, one Apple TV3. Both hard wired into AEBS which in turn is hard wired to a Mac Mini running iTunes. The library itself is on a HDD attached to the AEBS via USB. Also two airport express units.
Once/twice a day the remote app on my iPad/iPhone loses sight of iTunes, as do the Apple TVs. Quick restart of iTunes and we're back in business. iTunes on the Mac is fully functional in these periods of downtime so it's not like it cannot talk to the hard drive where the library is or anything. It is EXTREMELY annoying and got worse recently so some update has done something bad. Everything is running latest versions of software/firmware.
I set something up on my iPhone/iPad so I can restart iTunes remotely which helps A LOT but it's still far from ideal and not very 'Apple'.
Adam -
accidentally did something to energy saver or sleep-screen is black all the time and have to keep restarting, help!!!
like to just close the lid at night and open in the am and voila everything is there
during the week I will restart, but not every day!
what should the settings of each area be (sleep, energy, screen saver, wallpaper) be so I can work all day?try this: PRAM http://support.apple.com/kb/ht1379
-
Even as I try and submit this question, I have to keep restarting the iMac. Wifi is not the problem, and all other applications such as iPhoto, WP, PS, etc work. It's only Safari that cannot hold the connection. I want the downlevel version back so I can work again. But, don't know how to uninstall and install previous version. Help me, I'm drowning in restarts!
If you do not have a backup of your previous system, there is no easy way to revert back to the previous OS X version.
Perhaps we can help with your Mac and Safari issues.
It would help us to help you if we could have some more technical info about your iMac.
If you like, please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic reporting tool by a regular Apple Support forum user and technical support contributor named Etresoft. Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
It is not malware and can be safely downloaded and installed onto your Mac.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.
Thank You. -
My iPhone 4s. Keeps coming up sim invalid, I have to keep restarting my phone but doesn't help, it's only 5 days old and I'm fed up now with it now! Any solutions please?
There is obviously something not right... But to determine what the issue is, it needs to be looked at...
And the Apple Store would probably be the best place...
Just my opinion... -
Why do I have to keep restarting my MacBook when I'm switching between searches?
why do I have to keep restarting my MacBook when I'm switching between searches?
Sorry bear with me it's my first time using or posting to the community. I need to know if you are able to forward call to another iphone and use your Apple ID for facetime on a different phone. is this the reason for it being logged in call list as, " call answered by another device."
-
everytime I turn on my computer it loads the basic desktop (factory settings one) with non of my icons or image.
Sometimes if I restart my computer it loads correctly and other times I have to keep restarting my computer.
This is extremely annoying can anyone help to fix this issue.
It is happening on both mine and my spouses computer and both computers are less than 12 months old!
thanks.Hello m ember87un
What operating system are you running and what model of HP computer do you have? Based on your description it sounds like your user profiles may be corrupt or the computers are experiencing other problems. According to a Knowledge Base (KB) article from Microsoft this can also be caused by antivirus software scanning your computer what you try to log in. See the link to the KB below for troubleshooting steps if you are running Windows Vista or Windows 7.
As you can see in the symptoms Windows is loading a temporary profile for you. Do you receive any messages similar to "The user profile service failed the logon. User profile cannot be loaded."? Let me know what happens.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue. -
I have to keep restarting AirPort Extreme to get it to connect!
I have the AirPort Base Station and for some reason, it keeps disconnecting and wont show up in list of networks. The only way to get it back up is to unplug it and plug it back in. I have to do this multiple times a day now. Is this a problem for anyone else? Also is there any way to fix it? Thanks!
Message was edited by: zpkoahI too have this problem. It started out of nowhere when I had my old AirPort base station. I switched to the new AirPort Extreme and the problem continued. It happens with or without a HDD attached to it.
I've seen this problem in other discussion groups but haven't seen any good solutions. An Apple genius suggested that it is caused by having different computers connected to the network. I have a Mac (powerPC), a Mac (Intel) and a Dell PC all using the same AirPort. When the connection disappears though, they all lose connectivity. Restarting it doesn't do the trick all the time or it may take several restarts.
Any and all help is greatly appreciated. -
I have to keep restarting AppleTV to see Home Sharing on Windows 7 iTunes
I used to have all my media on a NAS drive with modified ATV2 so I can access my movies on there. This worked absolutely perfect, except I was annoyed I could not store and play iTunes purchased movies from the NAS. So I decided to factory reset ATV back to normal with latest update (6.0.2) and invest in a Windows 7 computer (Acer Revo) so I can leave it on permanently with iTunes running so I can access all my movies, TV shows and pics on all my devices anytime in the house without having my Macbook always on. Now I have problems.
Multiple times a day, I go to Computers on Apple TV and it either says "there was a problem connecting to the computer" or to "turn home sharing on on the computer". The computer is running fine. I can see and access it on the network using my computers and other devices. iTunes is running. Home Sharing is On.
To fix it I have to restart Apple TV and then Apple TV can connect OK.
The AppleTV is connected via network cable to the router, and so is the server (no wifi). The router is a Technicolour Gateway.
I have disabled the Firewall on Windows 7, still same problem.
The server, and AppleTV both have static IP addresses assigned.
iTunes on Windows 7 is version 11.1.3.8
ATV2 software is 6.0.2
I do hope I can fix this, because I want to do it Apple's way, and have spent all this time moving my library to iTunes. But if I cant I have to modify ATV2 again and not use Home Sharing. I also wanted to purchase an ATV3 for my bedroom, and for the kids rooms, but I am not going to if this problem persists.
P.S. I do not believe I should have an Apple computer with iTunes on, this should work seamlessly with iTunes on Windows 7. So dont know what else I can do.
P.P.S. I can see this is a common problem, but I started a new thread because everyone else says they have to restart iTunes or the router to fix it. I do not have to do this. I have to restart AppleTV. So I wonder if its an AppleTV issue and not a router/iTunes/server issue.
ThanksI also get this problem on my iPad, so probably not related to the AppleTV. On the iPad I restarted Airport Extreme this time, and then the iPad saw my Home Sharing.
So to recap, restarting the router or Airport Express allowed the iPad and AppleTV to see Home Sharing. Restarting AppleTV also allows AppleTV to see Home Sharing.
So does anyone have any idea?
Thanks -
Why do I have to keep Resetting Network Settings
Hi All,
Hopefully someone can help. Every time I need to access emails when I'm out this iPhone fails me. Today, I tried to access an email from a client which consisted of 2 words "That's fine". The wheel thing spun round, and round, and round, and round.... 6 minutes later it displayed "this has not been downloaded from the server".
I tried in vain to re-load but nothing. The only thing that seems to work is to "reset network settings".
This then means that my wifi settings at home now need re-inputting, as do the wi-fi settings at 3 of my other workplaces.
If I could, I would swap this for a Samsung or something. It's a constant source of frustration and embarrassment ( when I'm with clients)
I've had the **** thing replaced at the Apple store and I have phoned my mobile supplier t-mobile/EE ( don't get me started on them...) about 20 times and no-one can make this problem go away. I hate this iPhone.
Can anyone here help me?
Many thanks
GrangerBasic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I keep getting a box saying that firefox is already running and I have to restart my computer to access it
Duplicate Thread LOCK please
* Continue here - https://support.mozilla.com/en-US/questions/879834 -
Have to keep restarting wifi on Macbook
This have been an ongoing battle since I have moved into my current house and this has been about a year, Ive grown increasingly frustrated with it and want to know why it is acting this way. I loose wifi signal constantly, but the bars never go short of full bars. Nothing seems to ever load and the only temporary fix is to turn my wifi off and back on. But I have to restart it almost every time I open a new page or try to upload something. It only acts this way on my Macbook, not my iphone or xbox, ps3 etc.
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT4628 Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.
Maybe you are looking for
-
Can't open Backup File in FCPX
After a software update, when we open Pro my students events and projects are gone. I see the project and event files in the backup folder, and I tried deleting the current version of the project and replacing with the backup, but the backup will onl
-
Finder is still crashing with Lightroom 1.3 and Mac OS X 10.5.1
The problem reported with Lightroom 1.2 and Mac OS X 10.5 (Finder crashes when trying to read a JPG whose metadata contain some Lightroom specific development settings) is still present with both updates... Any hope Adobe would provide us with a way
-
Hello - I imported some photos from a digitalcamera to iPhoto, then I copied "Burnt" them to a CD. Now I am attempting to copy them back onto my computer into a Empty Folder, and I get this message. "You may need to enter the name and password for an
-
Can one ipod "infect" the PC and the other ipod?
Hi - I'm having a terrible time fixing this error. We use two ipod minis on the same Windows 2000 PC, on the same user account, connecting with firewire (don't have USB2, so USB isn't an option). For about a month everything was hunky dory, and then
-
Sales order return ( order type KE & RE)
Hi all, I have some issue. If we creatre a Sales order with order type RE or KR we will pass sold-to-party,ship-to-party , materials and quantity and if we press enter styem will take default storage location suddenly if we change ship-to-party route