Have to log on to open Query in BEX Browser
We upgraded to SAP GUI 710. We sign on to the BEX Browser and when we go to open any workbook, we have to sign on again. Has anyone encountered this or have a solution to this?
Thanks,
Russ
We upgraded to SAP GUI 710. We sign on to the BEX Browser and when we go to open any workbook, we have to sign on again. Has anyone encountered this or have a solution to this?
Thanks,
Russ
Similar Messages
-
Getting below error while opening query in bex 3.5x
Dear Guru's
I am getting below error while opening query in bex 3.5x
The following object were not found when accesing the server .
Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
Regards
KaranHi,
1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
2) so create an authorization object for each of these attributes with * (full authorization)
Regards,
Marasa. -
Unable to open Query in Bex Analyzer
Hi All,
I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
Any pop up something like that which is blocking the execution of Query??And its in production system,so its pretty urgent.Hi,
RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
The user had no rights to read some infoprovider data. After granting the rights he could run the query.
Regards. Leszek -
Hi all,
I am on BW 3.5.
I have a wierd problem when I try to open a query through BEx;
as the variable entry screen comes up after I have selected a query, I can see the last opened workbook behind it.
Then after I continue with the query putting in whatever options, the workbook opens.
If I refresh, it tries to refresh the workbook, and there is no sign of the query.
If I log on using a collegues user, BEx works as normal so, it must be down to the user settings or authorisations!!!
Has anyone experienced this before.
Thanks,
Shane.Hi Suraj,
If you want to execue your query, you can use the bex analyzer.
If you are opening the query from query designer 3.x query in 7.0 fronend, it will get upgraded and then cannot be reveted.
In your case this automatic migration might be havng some issues, owing to complexities.
Please recheck.
-Vikram -
Why does guest log-in only opens in Safari-safe browsing?
After upgrading hard drive and restoring Mountain Lion, my guest account now opens in Safari-safe browsing only. Prior to the hard drive upgrade, guest could log in and have full access instead of just internet only.
Hello toebar,
Welcome to the Apple Support Communities. Guest accounts need to be enabled from the Users & Groups in System Preferences. The following articles will give information on the types of Guest Account that can be enabled.
OS X Mountain Lion: Guest user preferences
http://support.apple.com/kb/PH11186
OS X Mountain Lion: Set up guest users
http://support.apple.com/kb/PH11321
Regards,
-Norm G. -
After the pop up occures and i tell it to use the current user the setup just closes.
Jailbreaking devices is a bad idea (and for most people, it's really old school). Update the devices to iOS 7 and all of your problems should go away.
-
Error in opening Query in Bex Query Designer
Hi all,
I am getting an error while opening the InfoProvider for a new Query in the Bex Query Designer.
program error in class SAPMSSY1 method : Uncaught_exception.
ASystem error in program CL_RSR and form GET_COB_PRO-02
In RSRT:
00000003 I>> Row: 78 Inc: LRRMSU13 Prog: SAPLRRMS
00000003 ASystem error in program CL_RSR and form GET_COB_PRO-02- (see long text).
With RegardsHi Raju,
Check for the authorization
Auth object : S_RS_ICUBE , S_RS_MPRO,S_RS_ISET
Infocube subobject -> aggregate ,data ,definition.
Auth object S_RS_COMP
Activity 01, 03, 16, 22
And let us know ...
Hope that helps.
Regards
Mr Kapadia -
Error when opening query in BEx Analyzer BI7
Hi all,
I get the following error when I open a query in the Analyzer.
<b>Unable to convert character set 4103 to character set 4103. possible.</b>
Afterwards it closes the connection.
Any help will be appreciated.
Cheers,
Meurant.Hi Meurant,
Most likely it is a mismatch between your Client GUI and sever.eps
The following steps helped in some cases.
1) Uninstall the SAP GUI on your m/c.
2) Upgrade all you operating system patches to the required level...If it's Windows XP.....just
get the latest updates from Microsoft.
3) Re-install GUI for 7.0
Good luck, BB -
Opening query in BEx field symbol issue
Hi,
I'm facing a problem in opening BEx Analyzer 7.0.
After starting BEx and logging on to the system a "BI Server error"-popup appears mentioning that there is a problem in the communication with the BI-server and that therefore the connection to the BI-server has been broken. The detailed error is: "Field symbol has not yet been assigned".
When clicking OK and logging on for the second time there is no problem.
Does anyone know how I can solve this?
Thanks,
Michel ScheresHi,
Front end is not installed properly. You can contact basis team it will resolve.
Regards,
Ajay. -
I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.
Try one of these extensions for multiple cookie sessions.
Multifox: <br />
http://br.mozdev.org/multifox/ <br />
Cookie Swap extension: <br />
https://addons.mozilla.org/firefox/3255/ <br />
Cookie Pie extension: <br />
http://www.nektra.com/oss/firefox/extensions/cookiepie/ -
Why do I have to log in to sites where I have asked to be remembered every time I open firefix?
I have firefox on my laptop and on my desktop. On my laptop, when I start up, my tabs open to facebook, gmail and my other email portal and all are logged in and ready to go. On my desktop I have to log in every one of them every time. I have checked the boxes that say keep me logged in but they never do that. I want to fix this but I don't know how.
* Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies -
Why is it everytime i open itunes i have to log in
everytime i open itunes it has reset and i have to log in again and then change the view. i.e. show sidebar?
Also, I assume it's the username and password for your home page, which could be Gmail, Yahoo mail, or another secure site you want to visit that requires a login. Is that right, or is this request coming out of left field?
-
Reg. Bex Error while opening query in query designer!!!!!
Hi Guys!!
Can any one help me in getting out of this issue.
I am getting BEx Error while opening query in query designer as below.
3:45:00 PM.400: Info: Query Designer Start. Revision: 500
3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager
-CALLING-FROM- 3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDfForm.InitFromCommandManager(QDbCommandManager iCommandManager)
at com.sap.bi.et.QueryDesigner.QDbCommandManager..ctor(QDbApplicationData iApplicationData, QDfForm iWindow)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Init()
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Table View
3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Rows/Columns
3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Cells
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Conditions
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Exceptions
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - InfoProvider
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Filter
QDbCommandManager::CommandExecute - Properties
QDbCommandManager::DoViewCommand - Properties
QDdEventDispatcher::MenuItemClickedHandler - Bar clicked: OpenQuery
QDbCommandManager::CommandExecute - Open...
OSDialogForm caught Exception: GetNodes: RFC Exception
-EXCEPTION-START- 3:45:19 PM.24: TRACE EXCEPTION ---
Exception Name: ObjectDisposedException
Exception Message: Cannot access a disposed object.
Object name: 'OSDialogForm'.
Exception at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Full Stack: at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
-EXCEPTION-END----
-CALLING-FROM- 3:45:19 PM.24: TRACE EXCEPTION ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Thanks in advance
PeterHi
If I got your question properly, you have SAP GUI Installation issues , Try to install relevant Excel version too.
http://help.sap.com/saphelp_nw70/helpdata/en/9c/03a042b443c56ae10000000a155106/frameset.htm
BASIS Team can help you in this.
Hope it helps -
Displaying all related Query Views of an opened Query via DropDown
Hello Gurus,
I have following requirement in WAD for SAP BW 7:
All Query Views related to a opened Query should be displayed and selectable via a DropDown Item.
In the standard WebTemplate 0Analysis there is already implemented a DropDown Item called "QueryView Selection" but i dont get it working like in the BW 3.5 template 0adhoc.
Has anyone a solution or hint?
Edited by: D. Gehle on Jan 13, 2011 2:15 PM
Edited by: D. Gehle on Jan 13, 2011 2:15 PMHi Shantanu
Thank you for your reply.
I made a trace in the web by putting &TRACE=X at the end of the string.
I tried to analysis the transaction RSRTRACE and looked at the All Logs button against my user id.
Firstly, i do not seem to understand what this produces other than the debug session. I could not also seem to find any information that assisted me on how to produce a log file, and information that indicates what you have said in your reply.
If you could further assist providing info on how to use the debugger/log file, and how to read
- used processors
Thank you.
Simon -
Trying to obtain and use PeopleSoft Open Query ODBC driver
I've found architectural diagrams and descriptions of the PeopleSoft Open Query ODBC driver and am looking for where to download this driver from.
Anyone know or have any experience in using it?
Thanks,
Bob SleikHello Bob,
The "PeopleSoft Open Query ODBC driver"
is delivered with PeopleTools. Starting with PT8.50, this driver is installed by running PS_HOME\bin\client\winx86\psodbccrinst.exe, which spools a log to %TEMP%\psodbccrinst.log
The psodbccrinst.log shows the files and registry updates involved.
After installing, when you open the ODBC administrator, you'll see 'PeopleSoft PeopleTools' driver for your PeopleTools release.
Kind Regards,
-Kirsten Zurbrugg
Maybe you are looking for
-
I have deleted everything off of my apple id account and i still can't get text on my droid device.
I got rid of my Iphone and got a new s4. Now that ios7 came out I can not get any texts from someone with ios7. I have deleted the phone from the apple id and changed my email. Still no texts. I had my friends delete my info, but still nothing.
-
How do I turn off "your recent download with your apple id" emails? Annoyingly often and they fill up my inbox. Is there a way to unsubscribe from these?
-
PDF only showing the first section
I've a interactive adobe embedded in my abap webdynpro that hides all sections except the 1st section onload(using JavaScript). However there's a "View All" link which will set every section to visible. After "View All" link is clicked, all the secti
-
mixed bag 1. I have a security app on my computer, Flashbrief. I have it checked in the hide column but whenever I turn on the computerit appears in the top menu line. 2. Whenever Iturn on the computer, a new blank document window in
-
Hi, I have been working with some projects in Premiere Pro CC without issue. These projects have been imported via .xml from FCP7. All was going swimmingly until I started importing some graphics that I created in After Effects CC. All of a sudden Pr