Have to re-connect to sync
Hi,
Since I've updated my Iphone 4, when i sync it I have to disconnect and re-connect the phone everytime I want to put a new album onto the phone.
I've looked around and can't find a resolution to it!!
Please help!!!
Thanks
Yes stupid itunes 11.0.4 does not sync to my Apple TV. I tried resetting it and no luck.
Similar Messages
-
I have lost my sync key because I reformatted my PC and didn't have a backup of it and my only other device connected to Sync is my iPhone but I cannot access the sync key in the Firefox Home app. I really wish I didn't have to erase all my sync data as I have some important passwords and bookmarks saved only in Sync.
I did. Safari could not open the show sync key addon and Firefox Home didn't even try to load it for some reason.
The second addon install button is grey when I try to open it with Firefox Home.
Thank you, I appreciate the help but I guess unless there's a way to get the sync key for example via sftp from the iPhone (I have jailbroken) I'm pretty much doomed. I tried looking around the Firefox Home app folder but could not find the sync key in there. If someone knows where to look for the key it would be helpful, in case it isn't encrypted. -
I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone. The iPhone4 shows the songs are not supported and on the Windows Machine the songs do not play completely. Can anyone advice what could have gone wrong ? Because rest of the devices are synced to MacBook and they are able to sync the content normally. I have even subscribed to iTunes Match but the problem is still not fixed.
Firstly... a little Clarity...
Devices refer to iDevices... iPod... iPhone... iPad. .. Not Computers.
Authoriation applies ONLY to Computers... of which there is a Limit of 5 per Apple ID.
If the issue is with iTunes on your Windows Computer... Perhaps you need to Re-install iTunes...
See Here... to Uninstall and Re-Install iTunes...
http://www.apple.com/support/itunes/install/ -
i upgraded my iphone os to 4.01 and i have not been able to sync to my computer. The error message I get says the Iphone connected is not recognised what can i do to solve this problem.
Did you try to connect in recovery mode? iOS: Unable to update or restore
Also check here: iOS: Device not recognized in iTunes for Windows
And make sure your security software is set up right: iTunes for Windows: Troubleshooting security software issues -
Will Wifi-sync on iOS5 start if I have my iPod connected to my car when I pull onto my drive in wifi range?
Well iOS 5 helps you sync with your computer wirelessly when connected to a power supply and on wifi.
iOS 4 should allow you to have automatic downloads from your account with iTunes rather than from your computer.
Just go to settings>store and turn on automatic downloads and it will do what you want whether it's plugged in or not as long as you're on wifi. -
I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please
I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please
-
I have just purchased an ipad 2 (already have an ipad1) and after syncing through itunes it will not connect to my home wifi. The first one connected immediately after setup. This one indicates my wifi accpimt bit states not connected. Help!
What make, model and version router do you have?
Is MAC address filtering turned ON in your router?
Do you have a limit on the number of connections set in your router?
What type of security are you using, i,e, WEP, WPA, WPA2?
Have you tried restarting your router? (remove power for 30 seconds and restart)
Does your iPad 2 work on any other networks? Starbucks, Borders, etc -
wanted to use Icloud to back up pictures and Itunes - it is running os 10.6.4. I have an original IPAD, nothing syncs without connecting. Do I need to purchase operating system updates? Wasn't sure what 10.6 Leopard is?
Snow Leopard, Mac OS X 10.6, is not iCloud compatible. You need to upgrade to Lion, Mac OS X 10.7, via a download from the app store...$29 (US), provided you had at least 10.6.6. You can upgrade to 10.6.8 for free as part of the software updated function, then go to the app store and purchase the Lion download.
When you do that, before installing Lion, make a copy of the Lion Installer from the Applications folder where it downloads to some other location, such as your Documents folder, so you have a backup copy.
For Lion you must have at least an Intel Core 2 Duo, i3, i5, i7, or Xenon processor, 2 GB memory though 4 GB is better and 7 GB free space on the hard drive.
As part of 10.7.2 you end up with the iCloud connection. -
I just switched from iphone 4s to LG G3. I'm having issues with bluetooth in my car, iphone would sync automatically but with G3 I have to manually connect to my car's bluetooth every time I turn it on - it won't sync automatically. Any fixes?
You can turn on BT tethering but it disables Wifi so if I have to do that step every time I get in my car, I just as well manually connect on BT every time.
-
I can't sync my iPhone 4S (updated to 5) to iTunes cuz I have no computer to connect to sync with the iTunes App. Help me please??
Have you disabled your virus protection?
-
While syncing my phone, it get stuck at step 3 while connecting to the iTunes store. Trouble-shooting states that I do have an internet connection but not a secure connection to the iTunes store.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
How do I enable the auto-connect to SYNC in my Ford Escape again?
Hello Me29.
I love the convenience of using Bluetooth in my car, and I want to make sure you don't miss out. Please follow the steps in this link to troubleshoot the SYNC feature: http://ford.to/1lfZOrG
AndreaS_VZW
Follow us on Twitter @VZWSupport -
New Ipod Touch will not connect or sync
I recently got a replacement Ipod Touch. I connected it to my computer and can see it in the My Computer window, however Itunes cannot connect or sync to it. It's not there. I have another Ipod Touch, it connects but will not Itunes does not recognize it when it comes to syncing. I have followed the directions on the help list. Nothing is helping. The new Ipod does connect and sync with another computer but my music is on this one. HELP!
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
New iPhone 5 will not connect to sync
I have a new iPhone 5 I got a couple days ago and it will not connect to sync in my car. I have a Ford Fusion 2012, and I had a 3GS that I used with it, and it worked perfectly for the few months I've had the car. I've tried everything with my iPhone 5 but it will not connect. It doesn't even ask me to put in the PIN. Sync shows the PIN and then I click on sync on my phone and it just sits there for a minute until eventually it says to make sure sync is on, in range and ready to pair. Any suggestions?
Read this it might help you http://www.apple.com/au/support/iphone/assistant/wifi/
-
Problem with connecting and syncing (quicktime.qts)
Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
TomAppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?
Maybe you are looking for
-
I like the Mozilla Firefox Start Page and I do find Google fairly useful (albeit that I have dumped Chrome for Firefox due to Google's constant badgering to sign-up to their social network "circles" etc) - but my gripe is that I am redirected to goog
-
Which Macbook Pro is better for me?
I bought the 13" version with the 2.4 GHz i5 processor. I know that I definitely don't want anything bigger, because I prefer smaller laptops. Now I'm kind of having doubts, though - should I have gone for the higher-end model of the 13"? Is the 2.
-
SQL Developer Database Copy truncates DATE columns
Hope someone can help me. I want to copy all object from one schema to another schema in my Database. I have used the "tools - Database Copy" utility and it copies all of the objects and data however when I query the DATE columns in the destination s
-
Restrictions while using ref cursor inside an xmltype
Hi, Looks like that getclobVal() can't be used in select where select statement is ref cursor for xmltype. example SQL> select xmltype(cursor(select xmltype('<a>1</a>').getclobval() from dual)) from dual; select xmltype(cursor(select xmltype('<a>1</a
-
Error in Pages when exporting ePub with image cover: Other images dissapear
That's it, if I insert an image in the first page, and select use first page as cover when exporting ePub, some (not all) other images inside the book will dissappear. I checked everything many times, and all the images are placed ok (not floating)..