Have to reboot my airport extreme every time i restart my PC.

Hello,
Why is it that i have to reboot my Airport Extreme every time i restart my PC? I am able to connect to the network but not the internet, unless/until i restart my base station.
My phones and tablets are connected to the internet, so i know the my ISP is not the issue.

It is impossible to work this out without lots of details.
Like what PC OS do you run?
What connection, wireless or ethernet?
What you use test with the other if possible. Does it work for example swapping from wireless to ethernet??
I presume wireless as it is the most trouble prone.. When you start the PC does the wireless connect? Do you get IP by DHCP .. if so does it match what you get after a reboot.. look particularly at dns and gateway addresses.
Is the PC showing location as home or work/public.. it must be home to work properly.. also firewall might matter.
Also what type of wireless card is used.. poor windows drivers abound.. particularly Intel cards in laptops.
Is the wireless name SMB compliant.. ie short, no spaces and pure alphanumeric?
Is the wireless password mix of only case and numbers.. nothing non-alphanumeric?

Similar Messages

I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?

I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?

Try:
ipod touch wont remember wifi password: Apple Support Communities
Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Have to reconnect to my network every time I restart

Every time I restart my computer, it fails to find my network even though the airport is on and the network is listed. I have gone through the network diagnostics which appears to work, but when I restart, it still can't find my network on its own for some reason. What's going on?

I think you have a corrupt .plist...
Maybe "/Library/Preferences/SystemConfiguration/preferences.plist", or "/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist", (or whatever interface you're using, if not airport).
Back them up before trashing them, then reboot.

Why do I have to reboot my apple tv every time I use it

Every time I use my ATV2 I have to reboot it, is there a solution?

have you tried to update the firmware of the router
and maybe making sure all updates for the computer and itunes were installed on the computer
and that the computers firewall is not blocking it

I have a 2nd gen airport extreme (no time capsule) and 2nd gen airport expresses: is there any new additons I can make to my existing network to improve reach and integrity of signal?

I have the older airport extreme and 2 2nd gen airport expresses in a large house. Lately I have been getting complaints about internet "drop out" and weak signal (orange signal - weak network) in one (oddly enough the nearest one to my extreme). What can I do to insure network and internet integrity going forward. Do I buy a new a. extreme and convert the old one (how is also a question)? Do I buy new expresses? (and why) Do I move the original express out of room and get longer internet cable? Extreme is upstairs in a split level and must remain there because of proximity to modem and its connection to security. The "working" express is all the way on the other side of the house through 2 concrete walls and does ok - though signal is understandable week. The nearer one with the "problems" is at the foot of the stairs less than 50 feet away, behind an always closed door (not tested-belongs to teenager voicing complaints). Incidentally the other bedroom directly across from the closed door one, houses a temporary adult child at home who has no problems with their lap top (2nd gen macbook) and signal.

There is no easy answer to your question, but here are some things to think about.
The newest generation of airport extremes and expresses are dual-band devices. they transmit on both 2.4 GHz and 5 GHz frequencies. the 2.4 GHz frequency penetrates walls better than the 5 GHz frequency which is faster in terms of data throughput. they also have improved antennas which may help your signal problems. unfortunately the only way to be sure would be trial and error you can also walk around with a laptop and monitor the signal strength to see where you have dropouts and consider repositioning your express devices to compensate .

Why do I have to reboot my apple tv every time iy goes to sleep

If I go over 12 hours without accessing apple tv I always have to unplug/replug to reboot. Tried changing sleep times and even selected never but still the same

have you tried to update the firmware of the router
and maybe making sure all updates for the computer and itunes were installed on the computer
and that the computers firewall is not blocking it

I upgraded to os X and when I start my macbook pro it loads ms word, firefox, neatworks, I have to close out those systems every time I restart my mac.

how do I stop programs from opening at startup

When you shut down, uncheck the window to reopen applications. If you update to 10.7.4, then it should remain unchecked each time you shutdown. In previous versions of the OS, you will have to uncheck the window each time you shut down or restart.
You might check your User Account login items for other applications you may not want as startup items if you have any there.

Have to create a new folio every time I restart my computer, any fix?

I'm having some major issues with updating articles. When I shut off my computer, on restart I can't open or update the articles in my folio. The only way to get them to update or even connect to source files is to create a new folio and re-import all of my articles again.
I've tried:
-Checking for and installing all adobe updates
-Re-installing INDD and DPS
-Logging out of Folio Builder and back in
-Making sure I'm not connected to any other user servers etc.
Would really like not to have to recreate this folio everytime I shut down. I'm on CS6, Mac OS 10.6.8. Any ideas?

I figured it out. I have to disconnect from servers and user drives, a problem I've experienced with Bridge and Photoshop in the past. I should have thought of it sooner:
http://forums.adobe.com/thread/765674
http://forums.adobe.com/message/3444550#3444550#3444550
Thanks team.

Still possible to use airport extreme for time machine?

I know apple doesn't officially support it but I remember with one of the airport utility updates, it allowed you to use an external HDD with an airport extreme for time machine backups. I tried hooking my external western digital to my airport extreme and it showed up as an airport disk, however I couldn't get time machine to access it. Is there a way I can get this to work?

I followed the instructions found on the link above and had a couple of issues:
1) Instructions state "Make sure 'Share disks over Ethernet WAN port' is checked." Could not find that check box anyplace.
2) Using first disk and then airport passwords as security, the disk does not show up in the Time Machine preferences. Am I to mount the disk first? Does not state that in the instructions.
3) If I mount the disk in the finder (security is a disk password), I am then able to see the drive in Time Machine and the back-up commences. The disk icon appears on my desktop and contains machine.sparcebundle. Another "disk" also appears on my desktop with the name "Time Machine Backups" and which contains the folder Backups.backupdb. I am also able to remotely attach to the machine doing the TM backup from another mac on the network and login.
4) Back-up started and appeared to go well (240G backed up with several partials after that) until I rebooted.
5) After reboot, it was frozen in "Making backup disk available" Opened preferences and it locked up. Had to force a reboot.
6) After restart, manually mounted the extreme external, opened Time Machine prefs, and when selecting back up location saw one with a red "∅" which I could not select and the other the extreme drive with 240G used. Attempted the back-up to the drive and I got "Making backup disk available" on the menu bar and the same message on TM system prefs with a spinning beach ball. Have been able to force quit system prefs and sent to error log to apple, but a forced reboot is still required because the TM icon on the menu continues to spin. Even a "sudu shutdown -r now" in terminal will not reboot the machine. Get to a blue screen with the spinning tick marks and it just sits there.
I wonder if the fact that I could not find "Make sure 'Share disks over Ethernet WAN port' is checked." is the issue. It does not appear to be available in the current version of the extreme base 7.4.2. Could those of you who were able to configure it with a previous version get grandfathered in? I wonder if I need to manually mount the extreme hard disk each time I reboot the machines. I am not sure how to do that but will try and see if it works.
I will be losing internet and e-mail access for a few weeks so will look at this thread again when I return.

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Every time i restart iPhoto , i have to turn on photo stream again, somebody know why?

every time i restart iPhoto , i have to turn on photo stream again, somebody know why?

I have exactly the same problem with iPhoto. On my iPad I just enabled Photo Stream once and it automatically is enabled each time I turn it on again. But on my MacBook Pro and my older tower Mac (both running Lion) I have to enable Photo Stream every time I reboot the computer. Frustrating.

In OS X Mavericks using Safari, the search bar at the top that i had on the previous system disappears only reappearing in the full screen. Do i have to go into full screen every time? Bit of a pain but no doubt I'm doing something wrong!

In OS X Mavericks using Safari, the search bar at the top that i had on the previous system version disappears only reappearing in the full screen. Do i have to go into full screen every time? Bit of a pain but no doubt I'm doing something wrong!

Those are all fine
Here is how to see RAM overloaded…
Reboot to see the system in it's default state.
Open TextEdit for the sake of it
Open Activity Monitor & Terminal from /Applications/Utilities.
Select the Memory tab
In Terminal enter the following command
memory_pressure -l critical
# note that is a lowercase L
RAM usage will climb, compression will begin the VM will become way more than the system has installed.
Eventually the system will start swapping (look for RED) - Watch the 'memory pressure' & 'Swap used' as this happens.
Try switching to TextEdit - the system is still coping !
Switch back to Terminal & hit ctrl+c to stop the process.
Watch the VM & memory pressure return to normal levels.
This OS kicks 4ss !
Your problems may lie elsewhere

Have to reboot my airport extreme every time i restart my PC.

Similar Messages

Maybe you are looking for