Have to "Set up Bluetooth Device" for wireless trackpad and keyboard almost every day

Almost every day when I turn on my MacBook Air in my home office, my Apple wireless keyboard and trackpad do not automatically reconnect. They used to connect just fine when I was in the viscinity, but now (for the past 6 months or so) I almost always have to:
Bluetooth > Set up Bluetooth Device
Turn off the keyboard (hold down the power button for several seconds)
Turn the keyboard back on (hold down power button for several seconds)
Go through the setup wizard
Repeat for the trackpad
Things that don't work:
Pressing the button on each Bluetooth device
Restarting each Bluetooth device
Turning Bluetooth on and off
Setting the Bluetooth devices as "Favorites"
Selecting the device from the Bluetooth menu item and clicking "Connect"
Rebooting my MacBook Air
Resetting  the NVRAM / PRAM
Once the device is connected for the day, I do appear to be able to "Disconnect" and then "Connect" again from the Bluetooth menu item. The devices will also automatically reconnect by pressing a button on them. It just appears to lose the "lease" on them or whatever after a little less than a day.
I'm trying to think of other troubleshooting steps I could take and it just occurred to me that I could try swapping them with the peripherals I use at work (which are possibly newer models, but otherwise identical). Any other suggestions?

Huzzah! Less than 1 week after finally getting fed up and posting this question, I have discovered the root cause - my wife had been inadvertently stealing my keyboard and mouse connection whenever she turned on her laptop! She's using my hand-me-down MacBook Pro which I thought I had reset, but apparently it remembered its Bluetooth connections.
I had suspected something similar since I occasionally used the wireless keyboard with my iPad, but had already ruled that out.
I can't believe I figured this out after 6 months of mild frustration, but just days after posting this question

Similar Messages

  • I am so frustrated and can't get Apple to help. I have charges on my bank statement for Apple ITunes and they occur every day or so. I've removed my credit card number but they continue. How can I stop these?  My bank says I have to contact apple.

    Please help. How can I get Apple to stop charging my bank for purchases. They are showing up every other day. I removed my credit card number from my account. That has not helped.

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: mailto:[email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    https://reportaproblem.apple.com/
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Getting Refunds for your iTunes Store Purchases
    http://www.labnol.org/software/itunes-app-store-refunds/13838/
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • Security update 2013 has corrupted wireless trackpad and keyboard

    Security update 2013 has corrupted my wireless trackpad and keyboard.  The wireless trackpad will select and highlight text on its own, will secondary click on its own, will highlight and drag text on its own, etc. It is basically possessed!
    Security update 2013 has also seriously corrupted my wireless keyboard.  The wireless keyboard will randomly jump back in the sentence or to earlier paragraph or worse just select and delete all that I have written as I am typing! It is very frustrating and is rendering my workstation useless!
    Please help me. Is there someway to update/reset bluetooth? Why is this happening after I updated?

    Similar keyboard conniptions on my MBP after the recent Snow Leopard update. Obviously, it being a MBP, this wasn't a wireless issue, but directly after installing the update, the keyboard refused to type a word. I could place the cursor with the mouse but the keyboard was totally non-reactive.
    Re-booted it. Didn' t work. Ran Disk Utitlity, verified the disk, verified and repaired disk permissions and then did another restart. After 10-15 secs of further inactivity, the keyboard started working again.
    There seems to be a problem relating to keyboards on the most recent Snow Leopard update. Disk Utility and a couple of restarts seems to have ironed out the wrinkle.

  • I ma using Firefox 4 in widows xp 32 bit, Everything was working fine in Firefox 3.x series, but after installing to Firefox 4 i am constantly getting this "not responding" by Firefox for like 5-10 seconds , almost every day.

    Hi, i ma using Firefox 4 in widows xp 32 bit,
    Everything was working fine in Firefox 3.x series, but after installing to Firefox 4 i am constantly getting this "not responding" by Firefox for like 5-10 seconds , almost every day.

    Hi, i ma using Firefox 4 in widows xp 32 bit,
    Everything was working fine in Firefox 3.x series, but after installing to Firefox 4 i am constantly getting this "not responding" by Firefox for like 5-10 seconds , almost every day.

  • Problems with bluetooth connection to wireless mouse and keyboard

    I am using a mac book (aluminium) with 10.6.4 with a Cinema Display and a wireless keyboard and mouse. My time capsule is located only 1 meter away from the mac book and every time the automatic sync starts my mouse and keyboard do not repsond anymore. It seems that the bluetooth connection is somehow heavily loaded due to the network traffic. I have updated all devices and restarted the computer several times. It always keeps on doing that. Any help?

    philip_axmann wrote:
    every time the automatic sync starts my mouse and keyboard do not repsond anymore.
    what you are seeing is called _*wireless interference*_.
    change the channel your TC broadcasts on.
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

  • Help Setup wireless trackpad and keyboard

    I have a new straight out of the box Mac mini, wireless keyboard and wireless trackpad.  How can I set these up?  I can use the trackpad to move around on the screen, but I cannot seem to click.  I can't figure out what the icons means.
      All advise appreciated. 

    Welcome to Apple discussions.  I am assuming you are new to Mac.  Please accept my apologies if this is a patronising assumption.
    You need to setup these devices using the Bluetooth Setup Assistant, keyboard and trackpad in System Preferences.
    1. Open System Preferences either in the Dock or from the Applications folder in Finder
    2. Select Bluetooth and ensure that it is switched on and discoverable.
    3. Select 'Set Up New Device' and the Bluetooth Setup Assistant will open in a new dialogue window.
    4. Follow the directions to connect to your trackpad.  Repeat to connect to keyboard.
    5. In System Preferences application select Trackpad or Keyboard to select your preferred settings.
    You should be able to set the gestures to make full use of the trackpad.  Good luck with your Mac Mini!

  • TS3682 i have just recieved my replacement iphone after loosing mine over the weekend... i have backup set to my icloud for my ipad and iphone. on my ipad i can see my iphone was backedup on the 28/3/13 yet when setting up my new phone to restore it says

    why on my ipad can i see my phone was backed up a few days ago yet i cannot restore my new phone to this backup? i have had to do it from my itunes which i havent used since august last year this is most upsetting as i feel i am paying good money for a service that cannot work efficiantly b
    could someone please plaese plaese help me

    Go here and have gmail reset your password for you https://www.google.com/accounts/recovery?hl=en&ard=AHwGkRlOlFoSSn30aRkElH5hxKyJ_ l6MrQqe-_NzHPagCT6fnpemmiT6ovu2yt1gXx7f1TA49Hq_5mQistIP9Vv3BKawDDBoHO-A2ISCDxwx2 kCbiCFEcQ2guu2o_Yx0ayZFIfsTu6Cof3q4MTkie-fWpUj5GIjiCYnMGXh6fU6ts---KDJXghFBIXU2M hJM6YFyWR6NEFy5esIpYnm8JFt-WZlsu5W_Ow&service=mail
    They will send a reset to your current email address

  • I have a Westell 6100G modem.  I want to set up Airport Express for wireless.  Can someone tell me how to do it step by step.  I'm using an HP with Windows Vista.  I'm a tech idiot.

    Just got Airport Express to save on GBs of data.  I have already a Westell 6100G which is for use as Internet Broadband, via Verizon.  How do I set up the Airport Express with this Westell.  Do I even still need the Westell, or do I need to also buy a wireless router?  I'm a tech idiot and this is driving me nuts.

    The Westell 6100G is a combination modem and router or gateway device. The AirPort Express is a wireless router.
    Since the Express does not have a built-in modem, you will still need your Westell gateway in order to access the Internet.
    Which exact model of AirPort Express do you have. It will be written (in very hard to read type on a label on one of the AirPort's sides). It should look something like: A1392. It may also state a Order#. In that case it would look something like: MC414LL/A
    Regardless of which model you have, the basic network configuration would be that you would connect an Ethernet cable between the Westell's Ethernet port and the WAN (circle of dots) port on the Express. (Note: If you have an earlier model of the Express, you would connect the cable to the only Ethernet port on the Express.)
    The good news is that you will not have to make any configuration changes to the Westell. We should be able to use it as configured.
    What we are going to start with is getting a basic Wi-Fi network that should provide your computer with wireless access to the Internet. Once verified as working, we can fine-tune this network to include wireless security and any other goals that you may have.
    Ready to start?
    I would recommend that you do the following as a minimum:
    Power-down the Westell and computer(s).
    While all of the devices are powered-down, perform a "factory default" reset on the AirPort Express base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    Once the reset has completed, remove the AirPort Express from power.
    Connect an Ethernet cable between the Westell and the AirPort Express.
    Power-up the Westell; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Why do I sometimes suddenly lose Bluetooth from my Imac? I use it for my wireless mouse and keyboard. I then can't find it in system preferences but have to shutdown my Mac and hope it comes back

    This is an infuriating problem and wondered if it happens to other people too and if I am doing the right thing by turning the Mac off then on again.

    Hi there vickivoo,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    -Griff W. 

  • Lost ability to set up bluetooth devices

    I'm running OS X 10.9.4 on my iMac. I have a Bluetooth keyboard which pairs at startup without problem. I also have a Bluetooth device for my hearing aids (UDirect2 from Unitron) which should allow me to stream the sound from my Mac wirelessly via this device to my hearing aids. When I first got the device I successfully paired it and got it to work. For a while it appeared in the list of Bluetooth items in the dropdown Bluetooth menubar menu, but it's disappeared from the list. I haven't been able to stream computer audio to my hearing aids since it disappeared.
    Everything I've seen tells me I need to choose the "Set up Bluetooth Device"  menu option. But that option has disappeared from my Bluetooth menu. It's also not present on the Bluetooth menu I can get to through System Preferences. I know it used to be there, because I've used it before, but not since I updated the OS. Online help refers to the Bluetooth Setup Assistant, but there is no item on my computer by that name, and the Apple site after referring to it simply shows the Preferences pane, which does not include the "Set up Bluetooth Device" command on it--at least on my computer.
    Is there something I'm missing? How can I get the setup command back?
    The UDirect 2 pairs successfully with my iPhone and streams sound from it, so I know it's working. It rests in its charging cradle when I'm not actually using it and its power light shows it's fully charged.
    It is turned on.

    Same here. I've just had a replacement iPhone and I have been into the bluetooth settings to pair it with my MacBook. But I couldn't find the setup bluetooth device option anywhere. Going to the folder Eric mentioned above works, but I'm curious to know where the correct link has gone?

  • Why doesn't my bluetooth menu give me the option to "Set Up Bluetooth Device"?

    Computer: 13.3 in Macbook Pro (2012)
    I just bought a new bluetooth mouse (Gear Head Optical Mouse for Mac Computer).  The instruction manual tells me to click on the Bluetooth icon at the top right of my screen and click on "Set Up Bluetooth Device".  But when I tried that, my bluetooth pull down menu only gives me limited options, none which includes "Set Up Bluetooth Device". (see attached image)
    I've already tried restarting my computer, going through the Bluetooth Preferences, and trying to connect via Mouse in System Preferences.  Does anyone have any ideas on where I might be doing something wrong or if I need to install anything additional?  Any help is appreciated!!

    Following are instructions from help in the Bluetooth Preferences:
    Make sure the device you’re setting up has charged batteries and is turned on.
    Choose Apple menu > System Preferences, then click Keyboard, Mouse, or Trackpad.If you’re setting up a mouse or trackpad, follow the onscreen instructions. When your mouse or trackpad is discovered, it automatically pairs with your Mac.

  • HT4859 I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

    I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

    The problem is that all services are bundled with your Apple ID ([email protected]):
    Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
    also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
    and the iTunes Match services.
    (I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
    If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
    iCloud (Settings > iCloud) with her account (e.g. [email protected])
    and
    iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
    In this case she gets access to your library and could use the same iTunes Match account.
    (See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

  • Can you have more than 3 Bluetooth devices active at the same time?

    I have trouble getting my Sony DR-BT101 to link when my mouse, trackpad, and keyboard (all wireless) are connected. I need to link by stereo headphones for music analysis and cannot get all to work at the same time. My Sony headset either won't pair or connect or causes alert that interfere with the running of other programs during my work. Even when I answer one of the alerts and turn off the Mouse it refuses to connect and finishes with a Stop Using Headset message. Even if I choose "Ignore" instead of turning off the Mouse or Trackpad, same thing. I once had everything working at the same time, so I can't figure out what is going on but it won't honor more than 3 devices, it seems. And also, when a new email arrives in my mailbox (iMac OS Lion 7.1 Mail), the alerts stop popping up and go through 3 iterations as each new email arrives. Weird. Any response on how to deal with this?

    @kalos
    Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
    No pulseaudio --kill command so I couldn't run.
    Checked systemd journal and there is no mention of PA this time.
    Checked top, and grepped ps aux and there is no PA there either.
    I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
    _ vlc Videos/anime/fmab/01.mp4
    VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
    [0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
    [0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    [0x7fb604001248] main vout display error: Failed to resize display
    But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
    @nomorewindows
    I see. That's too bad. At least we're not alone.
    Last edited by Greduan (2014-11-14 01:34:29)

  • I have just updated the i06 software for my ipad and it will not connect to my home wifi network - all my other devices are able to connect - i have tried all troubleshooting options and none have worked - please help

    I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
    I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating me

    you have to set up your router to solve th problem. first find and write down the ipad mac address.
    then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
    i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more.

  • HT201089 I am setting up an Ipad for my child and downloading apps with Ask to Buy turned on.  As the parent, I am not receiving notices/requests on my device

    I have an ipad mini 2 with ios 8 and and iphone 5s with ios8
    I am setting up the ipad for my child and the Ask to Buy feature is on in family sharing.
    I am trying to download apps from the app store and it pops up the notification that I need to Ask to Buy and the request is being sent.
    The request should be coming to my "parent" device, which happens to be my iphone correct ?   I'm not seeing any sort of requests.
    According to the posts I've read a request is only sent once.

    Apps downloaded on one should also appear on the other as long as the app in question runs on both iPads and iPhones.

Maybe you are looking for

  • Searching for a page in the site map

    Hi all! I'm using an older version of Dreamweaver... MX. I'm hoping there's a way to do a search for a specific page using the site map. I have some out-dated pages on a HUGE website I'm trying to clean up for a local organization. I did a search for

  • Best option for file storage

    I want to archive some of my CAD files and other files on a 'by year' basis. Is a flash drive a good option? They seem neat but then again they are a bit small & could get lost. Any ideas on the best option these days?

  • AGP graphic card

    I install FCE HD 3.0 on my Mac Book Pro and when I attempt to open the program I receive a message telling me I do not have an AGP Graphics Card. Should this card already be installed?

  • How do i authorize my itunes to be able to download pervious itunes purchases

    how do i authorize my itunes to be able to download pervious itunes purchases

  • Incremental loading - select taking a lot of time - urgent please

    Hi, I have a huge source oracle table with millions of records. I am using a last_update_date field from this table to select the new records. I have the last_update_date indexed. Also, please note number of distinct values of this field is not high.