Have to start SAP B1 Training
I Have to start SAP B1 Training
Plz give me links where i do self study or Video Materials
Plz dnt give link of SAP Service Market Place
Hi Shakti,
All documents about SAP B1 training are available in the SAP AG market place website. This link is an example:
https://websmp207.sap-ag.de/smb/sbo/education
the example from Gordon is also link sap market place.
Unofficial link is not available. If you can't download from sap market place link, you can request training to local SAP partner in your country. They will give you the document to self study. Just give the payment for copying or shipment of the document.
You can also contact me. Just read my business card to find out the available contact info.
JimM
Similar Messages
-
Hi,
I have completed my sap fico training, but i don't have any experience. I am an MBA finance having 6.6 years experience in accounts. Then can I get job in SAP field? & what type of course will do after MBA Finance? i want to do career in SAP Fico.Hi Mahesh,
as you have more than 6 yrs. experience , you can opt for sap field but the main thing is that still if your job hunt will get ended, you will be considered as ab fresher, so are you ready for those bucks you will get after you will become a sap FI/CO consultant.
Please understand one thing , if you wnats to make your career in sap field, you are most welcome, when it comes to a job for you in SAP FI/CO , you have to consider in your brain only middle or small size industry, because as far as i concern no single major company will provide you exposure to work with them (if you will get, its your good fortune). So, if you have decided to take a step ahead in sap FI/CO i will not give you negative thinking, if you are ready to negotiate in your renumeration in starting your career, then you can take a foot ahead, but look a job in middle size or small companies only, i think through this you will get any exposure more easily. -
I don't have IT education background,can I start SAP as career
I don't have IT education background,can I start SAP as career
Hi Vivek,
Of course!!
SAP provides a wide range of opportunities for people with different skillset. You have to know that it is not just an IT/software company. Rather SAP provides Business solution software to other companies "SAP Helps Companies Run Better". So SAP field also requires people other than just IT professionals.
Also read http://scn.sap.com/community/career-center/blog/2012/02/21/how-an-sap-abap-career-can-be-like-a-train-journey
Thanks & Best Regards,
Leon -
Getting Started with SAP-HCM training
Dear All,
After quiting job in India, I have recently shifted to USA on H4 visa. My professional background includes four years of experience into Human Resource with one of the leading DTH providers in India. I want to do SAP-HCM training, which might help in career start in US market.Looking forwarded for a proper guidance & suggestions..............How to start ?
Regards,
AnudHi Anud,
if you follow this link you will find under "support" the recruit to retire business processes that cover all aspects of HCM training & certification in the SAP context.
https://training.sap.com/shop/catalogue/by-business-process
Instead of attending in person training you can receive access to all learning content for self-study via SAP Learning Hub, which also includes instructor moderated Learning Rooms and access to training systems with SAP Live Access, helping you prepare for SAP Certification.
https://training.sap.com/shop/learninghub
Good luck!
Arnold -
Dear Experts .
I'm trying to enable widget for my company db but getting the following error :
Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again
I can connect to the B1iF locally and remotely .
I have the db configured in the SLD and connects successfully .
I have the event sender service and proxy started and configured for the company db.
I can access the Dashboard web portal and login with database sap credentials (but I see nothing there)
I've checked that there are no duplicate entries in the SSLD table for SBO common (note : 1619422)
I've also tried to re-activate the xelcious from the B1iF->control.
My Setup :
I'm runing SBO server, B1iF installed locally and B1iSN installed on a 3rd party server.
I'm using B1iF as even forwarder for B1iSN.
I know this has been discussed many times through out the forum and I've tried most of the stuff other than clean install.
I would appreciate any input before removing B1iF completely and re-installing.
Thanks in advance ,
Nadav.Hi,
The problem is SAP 8.81 PL04, with PL05 or PL06, it is solutioned.
Thanks, -
I have question regarding SAP HR career.
Dear Experts,
i wanna ask is it important that we have to work as HR executive or must have domain exp for getting job in SAP HR . i have completed SAP HR Training from some institute but i dont have any domain exp of hr please guide me how can i enter in SAP HR or i have to do HR executive job becoz my background is of IT i have done MCA .and i am also not so sound in ABAP programming . I am not MBA HR .i tried for hr executive jobs as fresher but not all companies hiring male candidates please guide me wht to do .To start career in SAP HR .Tell me some tips so that Companies can hire me as SAP HR ( Fresher ) ..
Thanks
Regards,
ViratHi Vee,
There is no mandatory rules that you need to have HR domain experience to become SAP HR. Go for SAP HCM certification and search a job then it will be big advantage to get a job.
https://training.sap.com/shop/certification/c_thr12_66-sap-certified-application-associate--human-capital-management-wit…
Regards
GGOPII -
Error while Installing and Starting SAP Widget Development Tools
Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AMHi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai -
Unabl to start sap (DISP+WORK Stopped) While installing/importing database
Dear Experts, As iam installing/ importing windows ecc 6.0 sr3 & DB2 9.5 ( Database exported using Hetrogeneous system copy from sqlserver 2005 to DB2), All phases finished and finally start sap failed due to db connect failure and i have tried by mmc and command mode but no hope. . Kindly help. trans log file and dev_w0 files below.
_Trans log file_
4 ETW000 r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 06.10.2009 - 05:15:05
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:07 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 9294 0.009294
4 ETW000 [dev trc ,00000] using "E:\usr\sap\SA4\SYS\exe\uc\NTAMD64\dbdb6slib.dll" 41 0.009335
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 25 0.009360
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll 23 0.009383
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.201) 641 0.010024
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll 26 0.010050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll 26 0.010076
4 ETW000 [dev trc ,00000] New connection 0 created 36 0.010112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.010162
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.010193
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 24 0.010217
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.010257
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:08 2009 472441 0.482698
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '
mascon-sap2\sapmnt\SA4\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
4 ETW000 51 0.482749
4 ETW000 35 0.483487
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260) 24 0.483511
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892) 25 0.483536
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743) 24 0.483560
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 34 0.483594
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568) 24 0.483618
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847) 24 0.483642
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574) 24 0.483666
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852) 24 0.483690
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102) 24 0.483714
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779) 25 0.483739
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194) 24 0.483763
4 ETW000 [dev trc ,00000] (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000 37 0.483800
4 ETW000 [dev trc ,00000] (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000 88 0.483888
4 ETW000 [dev trc ,00000] (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000 35 0.483923
4 ETW000 [dev trc ,00000] (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000 35 0.483958
4 ETW000 [dev trc ,00000] (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000 35 0.483993
4)
4 ETW000 35 0.484718
4 ETW000 [dev trc ,00000] (0.198) DB6: patch collection 02/09 (note 1294443) 24 0.484742
4 ETW000 [dev trc ,00000] (0.201) DB6: cobra enhancements (note 1315762) 24 0.484766
4 ETW000 [dev trc ,00000] Supported features: 20 0.484786
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 28 0.484814
4 ETW000 [dev trc ,00000] ..done 475 0.485289
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 22 0.485311
4 ETW000 [dev trc ,00000] Running with CLI driver. 376278 0.861589
4 ETW000 [dev trc ,00000] DB2 client driver version '09.05.0004' 373762 1.235351
4 ETW000 [dev trc ,00000] Connected to DB server type 'DB2/NT64' 2467 1.237818
4 ETW000 [dev trc ,00000] Connected to DB server version '09.05.0004' 520 1.238338
4 ETW000 [dev trc ,00000] Connected to 'SA4' as 'SAPSA4' schema 'SAPSA4' o.k. 44597 1.282935
4 ETW000 [dev trc ,00000] Connected: con_hdl=0 ; appl_hdl=19; appl_id="10.0.0.146.44548.091006101508"
4 ETW000 50 1.282985
4 ETW000 [dev trc ,00000] Database code page is ok. 480 1.283465
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:09 2009 241001 1.524466
4 ETW000 [dev trc ,00000] Database collating sequence is ok. 38 1.524504
4 ETW000 [dev trc ,00000] DB2_WORKLOAD=SAP is set in DB2 registry as required. 45663 1.570167
4 ETW000 [dev trc ,00000] CLI Insert Buffering is disabled on single partition databases. 35785 1.605952
4 ETW000 [dev trc ,00000] INFO: Unable to determine SAPDBHOST; defaulting to 'UNKNOWN' 255 1.606207
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 27 1.606234
4 ETW000 [dev trc ,00000] INFO: Unable to determine SAPDBHOST; defaulting to 'UNKNOWN' 20363 1.626597
4 ETW000 Connected to database.
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 72901 1.699498
4 ETW000 [dev trc ,00000] Disconnected from 'SA4' 2049 1.701547
4 ETW000 [dev trc ,00000] Disconnected: con_hdl=0 ; appl_hdl=19; appl_id="10.0.0.146.44548.091006101508"
4 ETW000 46 1.701593
4 ETW000 [dev trc ,00000] Disconnected from connection 0 79 1.701672
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=0, com_tx=0) 121 1.701793
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 24 1.701817
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 06.10.2009 - 05:15:09
dev_w0 file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Oct 06 05:07:11 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.201)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SA4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3572
M
M kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3572) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Tue Oct 06 05:07:12 2009
M ThInit: running on host mascon-sap2
M calling db_connect ...
C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf'
C
C &+
C &+
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] (END)
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]
M
M Info for wp 0
M
M pid = 3572
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mascon-sap2_SA4_00 on host mascon-sap2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Oct 06 05:07:12 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3572) [dpnttool.c 333]
Thanks in advanc
ChidamDear experts, As i have updated as per yours inputs and still unable to start sap. Kindly help.
1. SAPDBHOST is now accepting and there is no issues on "SAPDBHOST unknown."
2. dscdb6.conf file is available and it has all permission (including login userlevel)
3. dscdb6.conf was recreated new and tried, still dev_w0 shows
"M ThInit: running on host mascon-sap2
M calling db_connect ...
C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf' "
4. Environment variable all were added.
Tans log file
4 ETW000 r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.10.2009 - 06:34:10
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:12 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 9419 0.009419
4 ETW000 [dev trc ,00000] using "E:\usr\sap\SA4\SYS\exe\uc\NTAMD64\dbdb6slib.dll" 33 0.009452
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 24 0.009476
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll 23 0.009499
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.201) 635 0.010134
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll 26 0.010160
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll 26 0.010186
4 ETW000 [dev trc ,00000] New connection 0 created 36 0.010222
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 60 0.010282
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.010313
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 24 0.010337
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.010378
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:13 2009 473631 0.484009
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '
mascon-sap2\sapmnt\SA4\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
4 ETW000 57 0.484066
4 ETW000 [dev trc ,00000] Supported features: 21 0.486055
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 21 0.486076
4 ETW000 [dev trc ,00000] ..done 491 0.486567
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 21 0.486588
4 ETW000 [dev trc ,00000] Running with CLI driver. 329019 0.815607
4 ETW000 [dev trc ,00000] DB2 client driver version '09.05.0004' 266666 1.082273
4 ETW000 [dev trc ,00000] Connected to DB server type 'DB2/NT64' 3005 1.085278
4 ETW000 [dev trc ,00000] Connected to DB server version '09.05.0004' 513 1.085791
4 ETW000 [dev trc ,00000] Connected to 'SA4' as 'SAPSA4' schema 'SAPSA4' o.k. 20120 1.105911
4 ETW000 [dev trc ,00000] Connected: con_hdl=0 ; appl_hdl=381; appl_id="10.0.0.146.19717.091007113413"
4 ETW000 44 1.105955
4 ETW000 [dev trc ,00000] Database code page is ok. 37 1.105992
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:14 2009 52298 1.158290
4 ETW000 [dev trc ,00000] Database collating sequence is ok. 34 1.158324
4 ETW000 [dev trc ,00000] DB2_WORKLOAD=SAP is set in DB2 registry as required. 18173 1.176497
4 ETW000 [dev trc ,00000] CLI Insert Buffering is disabled on single partition databases. 10689 1.187186
*4 ETW000 [dev trc ,00000] DbSlControl: returning SAPDBHOST='mascon-sap2' 235 1.187421
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 24 1.187445
4 ETW000 [dev trc ,00000] DbSlControl: returning SAPDBHOST='mascon-sap2' 5737 1.193182
4 ETW000 Connected to database.*
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 9176 1.202358
4 ETW000 [dev trc ,00000] Disconnected from 'SA4' 2033 1.204391
4 ETW000 [dev trc ,00000] Disconnected: con_hdl=0 ; appl_hdl=381; appl_id="10.0.0.146.19717.091007113413"
4 ETW000 44 1.204435
4 ETW000 [dev trc ,00000] Disconnected from connection 0 75 1.204510
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=0, com_tx=0) 116 1.204626
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 23 1.204649
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 07.10.2009 - 06:34:14
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Oct 07 06:03:29 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.201)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SA4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 304
M
M kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 304) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
MX <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host mascon-sap2
M calling db_connect ...
*C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf'
C
C &+
C &+
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] (END)
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]*
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mascon-sap2_SA4_00 on host mascon-sap2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Oct 07 06:03:29 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 304) [dpnttool.c 333]
Thankyou
Chidam. -
Error message when starting SAP J2EE Engine 6.20
When i am starting SAP J2EE Engine 6.20 i am not able to get the homepage at its startup.
I have checked the Cluster_Log and it says
[OS: Windows XP] [VM vendor: Sun Microsystems Inc.] [VM version: 1.3.1_16-b06] [VM type: Java HotSpot(TM) Client VM]
SAP J2EE Engine Version 6.20 PatchLevel 100897.20 is starting...
Loading: LogManager ...
Loading: R3StartupManager ...
Loading: ThreadManager ...
Loading: TimeoutManager ...
Loading: MemoryManager ...
Loading: PoolManager ...
Loading: PolicyManager ...
Loading: ConnectionsManipulator ...
Loading: IpVerificationManager ...
Loading: ClusterManager ...
Loading: ClassLoaderManager ...
Loading: PortsManager ...
Loading: LockManager ...
Loading: ServiceManager ...
Loading core services:
Starting core service p4 ... done. (297 ms)
Starting core service security ... done. (78 ms)
Starting core service log ... done. (656 ms)
Starting core service admin ... done. (204 ms)
Starting core service monitor ... done. (235 ms)
Core services loaded successfully.
Loading additional services:
Starting service httptunneling ... done. (109 ms)
Starting service jms ... done. (0 ms)
Starting service telnet ... done. (94 ms)
Starting service shell ... done. (250 ms)
ID000544: Error starting service http. Can't start the service due to java.io.IOException: Can't open HTTP server socket on port 80
[ServiceManager]: ID000544: Error starting service http. Can't start the service due to java.io.IOException: Can't open HTTP server socket on port 80
Additional services loaded successfully.
[Framework -> criticalShutdown] [Tue Jul 22 13:44:16 IST 2008] Service http startup error!
Here i can notice "Cant open HTTP server socket on port 80".
How can i do this setting so that everything works fine.Hi
Check that your port 80 is not occupied by other running application (eg. IIS or ITS etc.)
Also check that it may be disabled by antivirus software.
Check the services file that this port is not assigned to other application then
http 80/tcp www www-http -
Problems starting SAP NetWeaver AS Trial Version
Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c 15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 37
wake_evt_udp_now 1
wake events total 37, udp 9 ( 24%), shm 28 ( 75%)
since last update total 37, udp 9 ( 24%), shm 28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00 ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00 <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c 10333]
Good Bye .....Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
1.0.0.127.in-addr.arpa
Record Name . . . . . : 1.0.0.127.in-addr.arpa.
Record Type . . . . . : 12
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
PTR Record . . . . . : localhost
localhost
Record Name . . . . . : localhost
Record Type . . . . . : 1
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : UKCL515803
Primary Dns Suffix . . . . . . . : drink.brew.beer
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sn.brew.beer
brew.beer
drink.brew.beer
scottishcourage.com
scottish-newcastle.co.uk
ghodom1.scottish-newcastle.co.uk
heiway.net
nl.heiway.net
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : drink.brew.beer
Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
Physical Address. . . . . . . . . : 00-26-55-11-C8-04
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : No
IP Address. . . . . . . . . . . . : 10.10.210.204
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.210.1
DHCP Server . . . . . . . . . . . : 10.10.160.167
DNS Servers . . . . . . . . . . . : 10.10.160.38
10.10.236.10
Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Regards
Tushar Kansara -
Hi experts i have created some basic SAP MDM Training Videos.Can Uplod this videos in SDN,
Moderated - do not post private email addresses!
Edited by: g.praveen kumar on Jun 27, 2008 4:46 PM
Message was edited by: Michael TheisHi Friends check out this link and give me the feed back
Creating a repository in mdm5.5 sp6
http://www.livevideo.com/video/1A4AAB3709F34E60A6650584857A6089/sap-mdm-tutorials-creating-a.aspx -
Problem Starting SAP with Oracle
Dear Experts,
Our production system rebooted due to some electricity issue and since then we are not able to start SAP. We are on oracle 10g and AIX OS. We have done all the options but no avail.
Following is screen output when I run command : "startsap".
startsap
Checking ABC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 700 - AIX v10.35 5L-64 bit 070123*
Usage: saposcol -l: Start OS Collector*
saposcol -k: Stop OS Collector*
saposcol -d: OS Collector Dialog Mode*
saposcol -s: OS Collector Status*
The OS Collector (PID 884754) is already running .....*
saposcol already running
Running /usr/sap/ABC/SYS/exe/run/startdb
Trying to start ABC database ...
Log file: /home/ABCadm/startdb.log
No SQLNet V2 connect to ABC available.*
Check that the listener is running: "lsnrctl status".
Start the listener as user oraABC: "lsnrctl start".
/usr/sap/ABC/SYS/exe/run/startdb: Terminating with error code 14
DB startup failed
prodserver:ABCadm 2>
Any help & advice to solve this issue will be appreciated.Hi Mark
As I am Novice user, however I have check /oracle/SID/ directory for .sapenv., .dbenv. files but I didn't find any file.
Then I have executed "env" command as a "root", Output is written below.
env
_=/usr/bin/env
MABCATH=/usr/dt/man:/usr/share/man
SESSIONTYPE=dt
DTDATABASESEARCHPATH=//.dt/types,/etc/dt/appconfig/types/%L,/etc/dt/appconfig/types/C,/usr/dt/appconfig/types/%L,/usr/dt/appconfig/types/C
LANG=en_US
LOGIN=root
G_BROKEN_FILENAMES=1
PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/dt/bin:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
DTUSERSESSION=root-192.168.0.180-0
XMICONBMSEARCHPATH=//.dt/icons/%B%M.bm://.dt/icons/%B%M.pm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B
SESSION_SVR=atpserver
LC__FASTMSG=true
WINDOWID=23068728
IC_DOCUMENT_SERVER_TYPE=STANDALONE
EDITOR=/usr/dt/bin/dtpad
LOGNAME=root
MAIL=/var/spool/mail/root
DTSCREENSAVERLIST=StartDtscreenSwarm StartDtscreenQix StartDtscreenFlame
StartDtscreenHop StartDtscreenImage StartDtscreenLife StartDtscreenRotor
StartDtscreenPyro StartDtscreenWorm StartDtscreenBlank
IC_DOCUMENT_SERVER_MACHINE_NAME=standalone
LOCPATH=/usr/lib/nls/loc
TERMINAL_EMULATOR=dtterm
USER=root
AUTHSTATE=compat
SAPINST_JRE_HOME=/usr/java14_64/jre
XFORCE_INTERNET=True
DEFAULT_BROWSER=Mozilla
DISPLAY=192.168.0.180:0.0
SHELL=/usr/bin/ksh
ODMDIR=/etc/objrepos
JAVA_HOME=/usr/java14_64
DTAPPSEARCHPATH=//.dt/appmanager:/etc/dt/appconfig/appmanager/%L:/etc/dt/appconfig/appmanager/C:/usr/dt/appconfig/appmanager/%L:/usr/dt/appconfig/appmanager/C
HOME=/
IC_DOCUMENT_SERVER_PORT=64111
IC_DOCUMENT_DIRECTORY=/opt/IBM/aix
XMICONSEARCHPATH=//.dt/icons/%B%M.pm://.dt/icons/%B%M.bm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B
TERM=dtterm
PWD=/
TZ=INDST+5:30
XMBINDDIR=/usr/dt/lib/bindings
DTHELPSEARCHPATH=//.dt/help/root-192.168.0.180-0/%H://.dt/help/root-192.168.0.18-0/%H.sdl://.dt/help/root-192.168.0.18-0/%H.hv://.dt/help/%H://.dt/help/%H.sdl://.dt/help/%H.hv:/etc/dt/appconfig/help/%L/%H:/etc/dt/appconfig/help/%L/%H.sdl:/etc/dt/appconfig/help/%L/%H.hv:/etc/dt/appconfig/help/C/%H:/etc/dt/appconfig/help/C/%H.sdl:/etc/dt/appconfig/help/C/%H.hv:/usr/dt/appconfig/help/%L/%H:/usr/dt/appconfig/help/%L/%H.sdl:/usr/dt/appconfig/help/%L/%H.hv:/usr/dt/appconfig/help/C/%H:/usr/dt/appconfig/help/C/%H.sdl:/usr/dt/appconfig/help/C/%H.hv
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/dt/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%l/%t/%c/%N.cat:/usr/dt/lib/nls/msg/%l/%c/%N.cat
If you need I will send you output of "env" command as a "ora<SID>" & <SID>adm
Thanks for all your support -
Hi All,
I have installed SAP Router before but this time when I installed and tried to start SAP Router its not getting started, and also not giving any error log file in SAP Router directory.
Please check the below command and correct me if I am wrong.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\sap_admin>cd \
C:\>cd SAPRTR
C:\SAPRTR>saprouter -r -S 3299 -K "p:CN=<MyRouterHOSTNAME>, OU=<Cust_NUM>, OU=SAProuter,
O=SAP, C=DE"
SAP Network Interface Router, Version 38.10
Compiled Oct 7 2009 03:08:09
start router : saprouter -r
stop router : saprouter -s
soft shutdown: saprouter -p
router info : saprouter -l (-L)
new routtab : saprouter -n
toggle trace : saprouter -t
cancel route : saprouter -c id
dump buffers : saprouter -d
flush " : saprouter -f
hide errInfo : saprouter -z
start router with third-party library: saprouter -a library
additional options
-R routtab : name of route-permission-file (default ./saprouttab)
-G logfile : name of log file (default no logging)
-T tracefile : name of trace file (default dev_rout)
-V tracelev : trace level to run with (default 1)
-H hostname : of running SAProuter (default localhost)
-S service : service-name / number (default 3299)
-P infopass : password for info requests
-C clients : maximum no of clients (default 800)
-Y servers : maximum no of servers to start (default 1)
-K [myname] : activate SNC; if given, use 'myname' as own sec-id
-A initstring: initialization options for third-party library
-D : switch DNS reverse lookup off
-E : append log- and trace-files to existing
-J filesize : maximum log file size in byte (default off)
-6 : IPv6 enabled
-Z : hide connect error information for clients
expert options
-B quelength : max. no. of queued packets per client (default 1)
-Q queuesize : max. total size for all queues (default 20000000 bytes)
-W waittime : timeout for blocking net-calls (default 5000 millisec)
-M min.max : portrange for outgoing connects, like -M 1.1023
-I address : address for outgoing connects, like -I 155.56.76.6
this is a sample routtab : -----------------------------------------
D host1 host2 serviceX
D host3
P * * serviceX
P 155.56.. 155.56
P 155.57.1011xxxx.*
P host4 host5 * xxx
P host6 localhost 3299
P host7 host8 telnet
S host9
P0,* host10
KP sncname1 * *
KS * host11 *
KD "sncname "abc" * *
KT sncname3 host11 *
deny routes from host1 to host2 serviceX
deny all routes from host3
permit routes from anywhere to any host using serviceX
permit all routes from/to addresses matching 155.56
permit ... with 3rd byte matching 1011xxxx
permit routes from host4 to host5 if password xxx supplied
permit information requests from host6
permit native-protocol-routes to non-SAP-server telnet
permit ... excluding native-protocol-routes (SAP-servers only)
permit ... if number of preceding/succeeding hops (SAProuters) <= 0/*
permit SNC-connection with partnerid = 'sncname1' to any host
permit all SAP-SAP SNC-connections to host11
deny all SNC-connections with partnerid = 'sncname "abc'
open connects to host11 with SNC enabled and partnerid = 'sncname3'
first match [host/sncname host service] is used
permission is denied if no entry matches
service wildcard (*) does not apply to native-protocol-routes
C:\SAPRTR>
Rg
RameshHello my friend
It could be certificate didn't import properly or routtab content is not correct. Here's your checklist:
Creating the certificate request
1) As user <snc_adm> set the environment variables SNC_LIB and SECUDIR
2) Change to the alias SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant u201CDistinguished Nameu201D.
3) Generate the certificate Request with the command:
sapgenpse get_pse -v -r certreq -p local.pse u201C<Distinguished Name>u201D
You will be asked twice for a PIN here. Please choose a PIN and document it, you have to enter it identically both times. Then you will have to enter the same PIN every time you want to use this PSE.
4) Display the output file "certreq" and with copy&paste (including the BEGIN and END statement) insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name.
5) In response you will receive the certificate signed by the CA in the Service Marketplace. Copy&paste the text to a new local file named "srcert", which must be created in the same directory as the sapgenpse executable.
6) With this in turn you can install the certificate in your saprouter by calling:
sapgenpse import_own_cert -c srcert -p local.pse
7) Now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user_for_saprouter>, the credentials are created for the logged in user account).
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
Note: The account of the service user should always be entered in full <domainname>\<username>
8) This will create a file called "cred_v2" in the same directory as "local.pse"
9) Check if the certificate has been imported successfully with the following command:
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be:
CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
10) If this is not the case, delete the files "cred_v2"and "local.pse" and start over at Item 3.
Additional actions necessary before you can start SAProuter
1. Check if the environment of the user running SAProuter contains the environment variable SNC_LIB and SECUDIR
2. Start the SAProuter with the following command line (to start the SAProuter as a Windows service, please follow the steps described in SAP note 525751):
saprouter -r -S <port> -K "p:<Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
3. The corresponding file "saprouttab" should look like:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
SNC-connection from SAP to telnet in your network
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P * 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your IP> <port>
Regards,
Effan
DON'T KNOW WHY THE FORMAT MESSED UP, PLEASE USE QUOTE ORIGINAL IN REPLY MODE TO READ THE CORRECT FORMAT CONTENT. SORRY! -
Possible ways to start SAP Web AS services
I am using J2EE SAP Web AS 7.0 on UNIX platform and herein i use startsap script to start SAP as well as database services. My concern here is that what all are the possible ways to start the SAP services apart from the above mentioned script? One i could figure out is to run all the commands in the script one by one, though does not make sense if the script is already available
Reason for asking above question is that i want to set an environment variable whenever SAP Engine starts up. And, if i embed this line in startsap script it would solve my purpose but if there is any other way also to start SAP services, then i have to cover those use cases also. So, please provide your suggestions for my requirement.
ThanksThanks for your input and it looks like adding an environment variable in startsap script is not a good option.
My requirement is that my SDA file has dependecy on some third party dll's and at the time of starting SAP Web AS, this dll path should be available at the beginning of LIBPATH variable. So, please let me know if some fix is available for my requirement.
Also, i have discoverd that SAP profile (located at /usr/sap/<SID>/profile/START_JC<SID>_<machine name>) has the required parameters( LIBPATH, etc) and if i add my dll path in these environment variables, i am able to load my dll at the SAP starting time. Here my questions are:
1. Is it fine to make changes in this profile file?
2. Would my changes be overwritten if the kernel upgrade happens?
3. If i start SAP using MMC (suggested by you), still this profile file be read for starting SAP Web AS and the dll's would be loaded?
Apart from this i tried out using "There is a java version as well, which can be started from a browser:
http://<hostname>:5<instance number>13" which internally uses MC. Here if i try starting SAP WebAS, it prompts for user name and password. I tried out <SID>adm user, J2EE Administrator user and machine root user but all these options were ruled out by the Authentication module. Can you please suggest which user name should i try to stop/start SAP using MMC?
Thanks -
SAP XI training from Siemens - Bangalore
Hi All,
I am planning to attend SAP XI training provided by Siemens. The course details are to cover TBIT40, TBIT41, TBIT43, TBIT44. I would like to get a feedback on, how effective is this training is to start working on the project? as currently I am assigned with the SAP XI project. I could get to know that this is online training.
I would request to know if anyone has already attended this training in Bangalore? if so please give me your contact details so that I will get in touch with you personally.
Thanks,
BinduHi,
This training includes the practicals with various scenarios like,
File to File, Idoc to file, RFC to SOAP and many more. BPM scenarios and many complicated mappings etc.
Atleast you will get the practicals with mostly of all the adapters.
But it again depends how will you explore yourself in it. this training will show you the way to achive the knowledge of it. It's your responsiblity to explore your self. If you can do this..then sky will be the limit...
Thanks
Swarup
Edited by: Swarup Sawant on Jan 22, 2008 1:46 PM
Maybe you are looking for
-
Unable to install CS5 Premium Suite on Windows 7
I have been using the same installer for months now on other, non Win7 machines, without any issues whatsoever. I recently got a brand new machine with Windows 7 on it and... now nothing will install. Well, take that back, when I had the option for t
-
IPod can't be synced because there is not enough free space?
At first, my iPod couldn't be synced because 'playlists doesn't exist'(there's another forum about this and apparently this comment helped a lot of people... "Click on your 'DEVICE' on the left in ITUNES, click the music tab and where it says Sync Mu
-
After upgrade to crm 2007 31 issues in genstatus
Following an upgrade from CRM 4.0 sp 6 to CRM 2007 sp4 we are getting the following errors in genstatus. Anu idea as to how these can be resolved. i have not been able to find any specific information on oss or in the forums on these specific issue
-
Hi All I have a problem while doing excise invoicing. At the time of GR incoming excise invoice is captured amd posted. The BED and SED accounts are deitted and CENVAT clearance account is credited.. During MIRO when i refer same PO and do , the acco
-
Excise duty calculation on Assessable value in PO
Dear Team, We are facing critical issue in Excise Duty calculation, Excise is calculating on basic price for our normal procurement and we are selling the same at MRP cost... Now the issue is Excise Duty has to be calculated on Assessable value (65%