Have to stop and restart Q-Master for it to show up in Compressor 3.5.1 SL

I am having a problem with Q-Master in Snow Leopard, running compressor 3.5.1, where every time I restart, when I go into compressor, it does not show up my Q-Master cluster. Instead I must go into the control panel (which has to restart into 32 bit mode, COME ON APPLE LETS MAKE Q-MASTER 64 BIT!) and stop and restart Q-Master and then it shows up in Compressor.
Is this because the control panel has to be in 32 bit mode for it to work? Is anyone else having a similar problem?

I have the exact same thing happening!!! Funny how you haven't got a response to fix the issue. I called Apple and the guys said I needed to reformat my drive and install FCS from scratch to get rid of any files from FCS 2, only because I used some FCP utility to remove the previous version.< </div>
Sorry you got that advice from Apple. Reinstalling Apple software is rarely effective and a scorched earth approach rarely solves anything. It simply takes everything back to a default state.
I've had this same issue with Qmaster on my system and I'm still running 10.5+ so it's not a Snow Leopard issue. I solved it, at least for now, by simply deleting Qmaster only and reinstalling just Qmaster. However, I deleted and installed Qmaster to solve a problem with FCP; it was crashing immediately upon launch.
This is important: I have no way of knowing if there is a direct or causal relationship between any of these events.
bogiesan

Similar Messages

HT1338 My special characters screen for pages is running in the background no matter what I do. It randomly pops up and then goes away. I can't close it even though I have closed pages and restarted my computer. How can I stop this.

My special characters screen for pages is running in the background no matter what I do. It randomly pops up and then goes away. I can't close it even though I have closed pages and restarted my computer. How can I stop this.

Try trashing the .plist with CharacterViewer in its name in Home/Library/Preferences. To get to Home/Library you may need to hold the option key down while you do Finder > Go.

Why does Image Capture stop recognizing Epson scanner after scanning several images? I have to stop and start the scanner in order for Image Capture to recognize it again.

Why does Image Capture stop recognizing Epson scanner after scanning several images? I have to stop and start the scanner in order for Image Capture to recognize it again.

Karen ...
Might be corrupted preferences (.plist)
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.image_Capture.plist
Click Go then move the com.apple.image_Capture.plist file to the Trash.
Restart your Mac and your scanner and try scanning an image.

I've been trying to download IOS5 for more than 2 hours. Do I need to stop and restart?

I've been trying to download IOS5 for more than 2 hours. Do I need to stop and restart the download?

I think I would cancel it. Unplug phone, then plug back in and then maybe only select download instead of download and install. Thats what I did for our phones and so far we have no issues at all with any of the features - new or old. I don't know why that would make a difference though. But it will allow you to unplug your phone once the download starts and go do your thing while its downloading. Then you can come back later and when u plug in iTunes will ask you to install new software for phone.

I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. Any solutions?

I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. How can I clear the download or solve this?

If it is a HD movie, it may not be enough. The iPad also need working space.
Try download to iTune (computer) and "Move" to iPad.

I can't play youtube videos. I will play for about 12 seconds, then stop, and restart over again. I tried youtube on IE and it works there. What do you suggest I do?

I can't play youtube videos. I will play for about 12 seconds, then stop, and restart over again. I tried youtube on IE and it works there. What do you suggest I do? edit

This problem can be solved selecting manually the video resolution.

Why do I need to stop and restart web server?????

I am developing servlets on sun's standard web server as well as with Netscape's web server.
The problem is every time I make any changes to servlet and recompile my code, changes are not visible until I stop and restart web server. I guess web server uses cached version of servlet.
Can any body help me to solve this problem? It is matter of some setting issues in web server. But since I am novice, I don't know.........

Some app servers have a "reloadable" attribute that can automatically detect changes in your servlet and reload your application for you. Not sure if all do though... but check through the docs on your app server and see if there's something similar. If not, you're probably stuck manually restarting.

Start, stop and restart while loops

Hi, my qustion is i have 2 example a and example b. Example b lets u start counting up in seconds when u want to. as long as the toggle switchs are in correct position. it also lets u start, stop and restart if need be. i want to be able to that with example a, but for some reason the while loop always sets of running independent of what position the the toggle switch. Any help greatly appreciated.
Thanks Stuart
Attachments:
examplealib.llb ‏202 KB
exampleb.vi ‏25 KB

An example as the attachment.
Attachments:
switch.vi ‏23 KB

Can a subVI tell when the application it is part of has been stopped and restarted?

Can a subVI tell when the application it is part of has been stopped and restarted?
It is easy enough for a subVI to tell when it has been run for the first time after having been loaded into memory. But is there a way for a subVI to tell when the application it is part of has been stopped and restarted? Is there some property or application-invocation-specific refnum that when queried multiple times during the same run of the application would return the same value yet when queried during different runs of the application would return different values?
I don�t want to depend on anything that happens when a run is exited.
I don�t want to require code to be included in the main V
I to accomplish the solution.
(Otherwise I could, in the main VI create an un-named semaphore tied to a global; the subVI could then check the global to see if the value changed, which it would between runs of the application.)
Any ideas?

Have you tried the First Call? function? It's on the Advanced>Synchronization palette.

Using cron to stop and restart password protected instance (App Server 7)

I have been asked by a customer to create a cron job to stop and restart their web application running under Applications server 7.
I have created the script and can stop the instance, but I am unable to start it as it is asking for a password.
I have included this in the script but it doesn't seem to like having a password supplied this way.
Am I doing something wrong or Are there any alternative ways of stopping and restarting an application, using Cron?

Have you looked at using password.conf file as described in --
http://docs.sun.com/source/816-7155-10/crcfgfil.html#1075615
You might also want to look at --
http://docs.sun.com/source/816-7156-10/agsvrprf.html#1019453

How to Stop and restart the midtier?

Hello All,
I have installed Oracle AS (Infraturcture & middle tier , BI & Forms) on same Linux box.i.e: Oracle As 10.1.2.0.2 (Rel 2, x86 for Linux), SLES 9
Here is my question:
How to Stop and restart the midtier?
Regards,
DN

biforms.sh
export ORACLE_HOME=/opt/oracle/biforms
export OH=$ORACLE_HOME
export PATH=$OH/bin:$OH/opmn/bin:/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/java/bin
export ORACLE_SID=ORCL
export LD_LIBRARY_PATH=$OH/lib:/usr/openwin/lib:/usr/dt/lib:/usr/lib:/tools/lib
infra.sh
export ORACLE_HOME=/opt/oracle/infra <-- or correct one!
export OH=$ORACLE_HOME
export PATH=$OH/bin:$OH/opmn/bin:/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/java/bin
export ORACLE_SID=ORCL
export LD_LIBRARY_PATH=$OH/lib:/usr/openwin/lib:/usr/dt/lib:/usr/lib:/tools/libAs you see, only the first row differs from these two scrips. Because I'm lazy, I usualy set export OH. Under certain circumstances you might want to add DISPLAY to biforms.sh. Set it to localhost:0 or whatever is correct.
Martin

After upgrading, videos randomly stop and restart.

Since upgrading to iTunes 10 purchased videos of TV shows randomly stop and restart. I've had these videos for years and never had a problem, but now every time I watch an episode it sill get around 5 minutes in and spontaneously start the episode over. Anyone else having these problems?

Hi Fabrizio,
why do you want to reboot your server every sunday?????
If you reboot your SAP this often, you'll have performance problems every Monday. All
of your SAP internal Buffers must be filled again after an reboot. If your DB is on the
same Host, also your DB Buffer is empty.
If this is an productive System, i highly recommend you that you not reboot your SAP System this often....
(By side, thats the difference between an *nix and an Windows System.).
What is the reason for doing that?
confused
Regards Manuel

Redhat linux 6 VM - stop and restart

Hi,
I've installed new HVM - Redhat Linux 6, standard installation. I have the problem with stop and restart initiated from the OVM console. Job is running, but the OS inside VM doesn't start the shutdown process.
For example another VM running Oracle Linux 6 works. The same problem is with the restart and live migration - both works for Oracle Linux, but redhat no.
Do you have an idea what are the requirements for stopping and restarting the VM from OVM console?

DN,
I take all your questions, don't I?
Anyhow, this command adds your Report Server to the Oracle Process Manager and Notification Server's (opmn) and Enterprise Control:
$OH/bin/addNewServerTarget.sh reports_server_name
After that your Reports server will be started and stopped whenever you issue "opmnctl startall / stopall". Issue a opmnctl reload after running that script, or opmnctl restart.
You can also start and stop it individual with: (the choice is yours)
opmnctl startproc ias-component=reports_server_name
opmnctl stopproc ias-component=reports_server_name
opmnctl startproc process-type=reports_server_name
opmnctl stopproc process-type=reports_server_name
Check status with:
opmnctl status

How to start, stop and restart task

Hello Everyone,
Need advice on what is the correct way to start, stop and restart a Java task?
I have tried with Executors.newCachedThreadPool() or fixedThreadPool() however I was only able to submit the task once. My program crashed when i tried to resubmit the task again after a shutdownnow command()

Tasks are designed to be run once. If you want restart functionality, use a service:
http://docs.oracle.com/javafx/2/api/javafx/concurrent/Service.html
The sample service I posted in the following thread demonstrates how to do this:
Multithreading
Use of Executors is not necessary as a Service encapsulates the execution thread management (though you can set your own executor on the service if you really needed it). All you need to do is make use of the service start, cancel, restart and reset methods as required. If you do use the cancel method, then you need to make sure that your service is properly interrupt aware for the cancel to function as you expect.

After updating 10.9.2 update the computer stops and restarts abruptly and systematically whenever it is in standby. Please how to fix this ?

Hello,
I'm french, sorry my bad english. Please Help me !
After updating 10.9.2 update the computer stops and restarts abruptly and systematically whenever it is in standby (sleeping).
This message apeaars : “Your computer restarted because of a problem”
Please how to fix this ?
I tried an SMC reset PRAM and reset, but not result !
I have not installed new software or plugin. Only updated OS X 10.9.2.
With 10.9.1 or earlier I never had a problem !
Thank you for your help
Francisco to Paris

Hello FM-Paris,
Thank you for the details of the issue you are experiencing with your Mac mini. I would be concerned too if my Mac mini was restarting unexpectedly. I recommend following the steps in the section titled "Troubleshooting a recurring kernel panic" in the article below to help isolate and troubleshoot this issue:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
http://support.apple.com/kb/TS4636
Thank you for using Apple Support Communities.
Best,
Sheila M.

Have to stop and restart Q-Master for it to show up in Compressor 3.5.1 SL

Similar Messages

Maybe you are looking for